/* * Copyright (C) 2018 Marvell International Ltd. * * SPDX-License-Identifier: BSD-3-Clause * https://spdx.org/licenses */ #ifndef _PHY_COMPHY_3700_H #define _PHY_COMPHY_3700_H #define PLL_SET_DELAY_US 600 #define COMPHY_PLL_TIMEOUT 1000 #define REG_16_BIT_MASK 0xFFFF #define COMPHY_SELECTOR_PHY_REG 0xFC /* bit0: 0: Lane0 is GBE0; 1: Lane1 is PCIE */ #define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT BIT(0) /* bit4: 0: Lane1 is GBE1; 1: Lane1 is USB3 */ #define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT BIT(4) /* bit8: 0: Lane1 is USB, Lane2 is SATA; 1: Lane2 is USB3 */ #define COMPHY_SELECTOR_USB3_PHY_SEL_BIT BIT(8) /* SATA PHY register offset */ #define SATAPHY_LANE2_REG_BASE_OFFSET 0x200 /* USB3 PHY offset compared to SATA PHY */ #define USB3PHY_LANE2_REG_BASE_OFFSET 0x200 /* Comphy lane2 indirect access register offset */ #define COMPHY_LANE2_INDIR_ADDR_OFFSET 0x0 #define COMPHY_LANE2_INDIR_DATA_OFFSET 0x4 /* PHY shift to get related register address */ enum { PCIE = 1, USB3, }; #define PCIEPHY_SHFT 2 #define USB3PHY_SHFT 2 #define PHY_SHFT(unit) ((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT) /* PHY register */ #define COMPHY_POWER_PLL_CTRL 0x01 #define PWR_PLL_CTRL_ADDR(unit) (COMPHY_POWER_PLL_CTRL * PHY_SHFT(unit)) #define PU_IVREF_BIT BIT(15) #define PU_PLL_BIT BIT(14) #define PU_RX_BIT BIT(13) #define PU_TX_BIT BIT(12) #define PU_TX_INTP_BIT BIT(11) #define PU_DFE_BIT BIT(10) #define RESET_DTL_RX_BIT BIT(9) #define PLL_LOCK_BIT BIT(8) #define REF_FREF_SEL_OFFSET 0 #define REF_FREF_SEL_MASK (0x1F << REF_FREF_SEL_OFFSET) #define REF_CLOCK_SPEED_25M (0x1 << REF_FREF_SEL_OFFSET) #define REF_CLOCK_SPEED_30M (0x2 << REF_FREF_SEL_OFFSET) #define PCIE_REF_CLOCK_SPEED_25M REF_CLOCK_SPEED_30M #define USB3_REF_CLOCK_SPEED_25M REF_CLOCK_SPEED_30M #define REF_CLOCK_SPEED_40M (0x3 << REF_FREF_SEL_OFFSET) #define REF_CLOCK_SPEED_50M (0x4 << REF_FREF_SEL_OFFSET) #define PHY_MODE_OFFSET 5 #define PHY_MODE_MASK (7 << PHY_MODE_OFFSET) #define PHY_MODE_SATA (0x0 << PHY_MODE_OFFSET) #define PHY_MODE_PCIE (0x3 << PHY_MODE_OFFSET) #define PHY_MODE_SGMII (0x4 << PHY_MODE_OFFSET) #define PHY_MODE_USB3 (0x5 << PHY_MODE_OFFSET) #define COMPHY_KVCO_CAL_CTRL 0x02 #define KVCO_CAL_CTRL_ADDR(unit) (COMPHY_KVCO_CAL_CTRL * PHY_SHFT(unit)) #define USE_MAX_PLL_RATE_BIT BIT(12) #define SPEED_PLL_OFFSET 2 #define SPEED_PLL_MASK (0x3F << SPEED_PLL_OFFSET) #define SPEED_PLL_VALUE_16 (0x10 << SPEED_PLL_OFFSET) #define COMPHY_RESERVED_REG 0x0E #define PHYCTRL_FRM_PIN_BIT BIT(13) #define COMPHY_LOOPBACK_REG0 0x23 #define DIG_LB_EN_ADDR(unit) (COMPHY_LOOPBACK_REG0 * PHY_SHFT(unit)) #define SEL_DATA_WIDTH_OFFSET 10 #define SEL_DATA_WIDTH_MASK (0x3 << SEL_DATA_WIDTH_OFFSET) #define DATA_WIDTH_10BIT (0x0 << SEL_DATA_WIDTH_OFFSET) #define DATA_WIDTH_20BIT (0x1 << SEL_DATA_WIDTH_OFFSET) #define DATA_WIDTH_40BIT (0x2 << SEL_DATA_WIDTH_OFFSET) #define PLL_READY_TX_BIT BIT(4) #define COMPHY_SYNC_PATTERN_REG 0x24 #define SYNC_PATTERN_REG_ADDR(unit) (COMPHY_SYNC_PATTERN_REG * \ PHY_SHFT(unit)) #define TXD_INVERT_BIT BIT(10) #define RXD_INVERT_BIT BIT(11) #define COMPHY_SYNC_MASK_GEN_REG 0x25 #define PHY_GEN_MAX_OFFSET 10 #define PHY_GEN_MAX_MASK (3 << PHY_GEN_MAX_OFFSET) #define PHY_GEN_USB3_5G (1 << PHY_GEN_MAX_OFFSET) #define COMPHY_ISOLATION_CTRL_REG 0x26 #define ISOLATION_CTRL_REG_ADDR(unit) (COMPHY_ISOLATION_CTRL_REG * \ PHY_SHFT(unit)) #define PHY_ISOLATE_MODE BIT(15) #define COMPHY_MISC_REG0_ADDR 0x4F #define MISC_REG0_ADDR(unit) (COMPHY_MISC_REG0_ADDR * PHY_SHFT(unit)) #define CLK100M_125M_EN BIT(4) #define CLK500M_EN BIT(7) #define PHY_REF_CLK_SEL BIT(10) #define MISC_REG0_DEFAULT_VALUE 0xA00D #define COMPHY_REG_GEN2_SET_2 0x3e #define GEN2_SETTING_2_ADDR(unit) (COMPHY_REG_GEN2_SET_2 * PHY_SHFT(unit)) #define G2_TX_SSC_AMP_VALUE_20 BIT(14) #define G2_TX_SSC_AMP_OFF 9 #define G2_TX_SSC_AMP_LEN 7 #define G2_TX_SSC_AMP_MASK (((1 << G2_TX_SSC_AMP_LEN) - 1) << \ G2_TX_SSC_AMP_OFF) #define COMPHY_REG_GEN2_SET_3 0x3f #define GEN2_SETTING_3_ADDR(unit) (COMPHY_REG_GEN2_SET_3 * PHY_SHFT(unit)) #define G3_TX_SSC_AMP_OFF 9 #define G3_TX_SSC_AMP_LEN 7 #define G3_TX_SSC_AMP_MASK (((1 << G2_TX_SSC_AMP_LEN) - 1) << \ G2_TX_SSC_AMP_OFF) #define G3_VREG_RXTX_MAS_ISET_OFF 7 #define G3_VREG_RXTX_MAS_ISET_60U (0 << G3_VREG_RXTX_MAS_ISET_OFF) #define G3_VREG_RXTX_MAS_ISET_80U (1 << G3_VREG_RXTX_MAS_ISET_OFF) #define G3_VREG_RXTX_MAS_ISET_100U (2 << G3_VREG_RXTX_MAS_ISET_OFF) #define G3_VREG_RXTX_MAS_ISET_120U (3 << G3_VREG_RXTX_MAS_ISET_OFF) #define G3_VREG_RXTX_MAS_ISET_MASK (BIT(7) | BIT(8)) #define RSVD_PH03FH_6_0_OFF 0 #define RSVD_PH03FH_6_0_LEN 7 #define RSVD_PH03FH_6_0_MASK (((1 << RSVD_PH03FH_6_0_LEN) - 1) << \ RSVD_PH03FH_6_0_OFF) #define COMPHY_REG_UNIT_CTRL_ADDR 0x48 #define UNIT_CTRL_ADDR(unit) (COMPHY_REG_UNIT_CTRL_ADDR * \ PHY_SHFT(unit)) #define IDLE_SYNC_EN BIT(12) #define UNIT_CTRL_DEFAULT_VALUE 0x60 #define COMPHY_MISC_REG1_ADDR 0x73 #define MISC_REG1_ADDR(unit) (COMPHY_MISC_REG1_ADDR * PHY_SHFT(unit)) #define SEL_BITS_PCIE_FORCE BIT(15) #define COMPHY_REG_GEN3_SETTINGS_3 0x112 #define COMPHY_GEN_FFE_CAP_SEL_MASK 0xF #define COMPHY_GEN_FFE_CAP_SEL_VALUE 0xF #define COMPHY_REG_LANE_CFG0_ADDR 0x180 #define LANE_CFG0_ADDR(unit) (COMPHY_REG_LANE_CFG0_ADDR * \ PHY_SHFT(unit)) #define PRD_TXDEEMPH0_MASK BIT(0) #define PRD_TXMARGIN_MASK (BIT(1) | BIT(2) | BIT(3)) #define PRD_TXSWING_MASK BIT(4) #define CFG_TX_ALIGN_POS_MASK (BIT(5) | BIT(6) | BIT(7) | BIT(8)) #define COMPHY_REG_LANE_CFG1_ADDR 0x181 #define LANE_CFG1_ADDR(unit) (COMPHY_REG_LANE_CFG1_ADDR * \ PHY_SHFT(unit)) #define PRD_TXDEEMPH1_MASK BIT(15) #define USE_MAX_PLL_RATE_EN BIT(9) #define TX_DET_RX_MODE BIT(6) #define GEN2_TX_DATA_DLY_MASK (BIT(3) | BIT(4)) #define GEN2_TX_DATA_DLY_DEFT (2 << 3) #define TX_ELEC_IDLE_MODE_EN BIT(0) #define COMPHY_REG_LANE_STATUS1_ADDR 0x183 #define LANE_STATUS1_ADDR(unit) (COMPHY_REG_LANE_STATUS1_ADDR * \ PHY_SHFT(unit)) #define TXDCLK_PCLK_EN BIT(0) #define COMPHY_REG_LANE_CFG4_ADDR 0x188 #define LANE_CFG4_ADDR(unit) (COMPHY_REG_LANE_CFG4_ADDR * \ PHY_SHFT(unit)) #define SPREAD_SPECTRUM_CLK_EN BIT(7) #define COMPHY_REG_GLOB_PHY_CTRL0_ADDR 0x1C1 #define GLOB_PHY_CTRL0_ADDR(unit) (COMPHY_REG_GLOB_PHY_CTRL0_ADDR * \ PHY_SHFT(unit)) #define SOFT_RESET BIT(0) #define MODE_REFDIV 0x30 #define MODE_CORE_CLK_FREQ_SEL BIT(9) #define MODE_PIPE_WIDTH_32 BIT(3) #define MODE_REFDIV_OFFSET 4 #define MODE_REFDIV_LEN 2 #define MODE_REFDIV_MASK (0x3 << MODE_REFDIV_OFFSET) #define MODE_REFDIV_BY_4 (0x2 << MODE_REFDIV_OFFSET) #define COMPHY_REG_TEST_MODE_CTRL_ADDR 0x1C2 #define TEST_MODE_CTRL_ADDR(unit) (COMPHY_REG_TEST_MODE_CTRL_ADDR * \ PHY_SHFT(unit)) #define MODE_MARGIN_OVERRIDE BIT(2) #define COMPHY_REG_GLOB_CLK_SRC_LO_ADDR 0x1C3 #define GLOB_CLK_SRC_LO_ADDR(unit) (COMPHY_REG_GLOB_CLK_SRC_LO_ADDR * \ PHY_SHFT(unit)) #define MODE_CLK_SRC BIT(0) #define BUNDLE_PERIOD_SEL BIT(1) #define BUNDLE_PERIOD_SCALE (BIT(2) | BIT(3)) #define BUNDLE_SAMPLE_CTRL BIT(4) #define PLL_READY_DLY (BIT(5) | BIT(6) | BIT(7)) #define CFG_SEL_20B BIT(15) #define COMPHY_REG_PWR_MGM_TIM1_ADDR 0x1D0 #define PWR_MGM_TIM1_ADDR(unit) (COMPHY_REG_PWR_MGM_TIM1_ADDR * \ PHY_SHFT(unit)) #define CFG_PM_OSCCLK_WAIT_OFF 12 #define CFG_PM_OSCCLK_WAIT_LEN 4 #define CFG_PM_OSCCLK_WAIT_MASK (((1 << CFG_PM_OSCCLK_WAIT_LEN) - 1) \ << CFG_PM_OSCCLK_WAIT_OFF) #define CFG_PM_RXDEN_WAIT_OFF 8 #define CFG_PM_RXDEN_WAIT_LEN 4 #define CFG_PM_RXDEN_WAIT_MASK (((1 << CFG_PM_RXDEN_WAIT_LEN) - 1) \ << CFG_PM_RXDEN_WAIT_OFF) #define CFG_PM_RXDEN_WAIT_1_UNIT (1 << CFG_PM_RXDEN_WAIT_OFF) #define CFG_PM_RXDLOZ_WAIT_OFF 0 #define CFG_PM_RXDLOZ_WAIT_LEN 8 #define CFG_PM_RXDLOZ_WAIT_MASK (((1 << CFG_PM_RXDLOZ_WAIT_LEN) - 1) \ << CFG_PM_RXDLOZ_WAIT_OFF) #define CFG_PM_RXDLOZ_WAIT_7_UNIT (7 << CFG_PM_RXDLOZ_WAIT_OFF) #define CFG_PM_RXDLOZ_WAIT_12_UNIT (0xC << CFG_PM_RXDLOZ_WAIT_OFF) /* SGMII */ #define COMPHY_PHY_CFG1_OFFSET(lane) ((1 - (lane)) * 0x28) #define PIN_PU_IVEREF_BIT BIT(1) #define PIN_RESET_CORE_BIT BIT(11) #define PIN_RESET_COMPHY_BIT BIT(12) #define PIN_PU_PLL_BIT BIT(16) #define PIN_PU_RX_BIT BIT(17) #define PIN_PU_TX_BIT BIT(18) #define PIN_TX_IDLE_BIT BIT(19) #define GEN_RX_SEL_OFFSET 22 #define GEN_RX_SEL_MASK (0xF << GEN_RX_SEL_OFFSET) #define GEN_TX_SEL_OFFSET 26 #define GEN_TX_SEL_MASK (0xF << GEN_TX_SEL_OFFSET) #define PHY_RX_INIT_BIT BIT(30) #define SD_SPEED_1_25_G 0x6 #define SD_SPEED_2_5_G 0x8 /* COMPHY status reg: * lane0: PCIe/GbE0 PHY Status 1 * lane1: USB3/GbE1 PHY Status 1 */ #define COMPHY_PHY_STATUS_OFFSET(lane) (0x18 + (1 - (lane)) * 0x28) #define PHY_RX_INIT_DONE_BIT BIT(0) #define PHY_PLL_READY_RX_BIT BIT(2) #define PHY_PLL_READY_TX_BIT BIT(3) #define SGMIIPHY_ADDR(off, base) ((((off) & 0x00007FF) * 2) + (base)) #define MAX_LANE_NR 3 /* comphy API */ int mvebu_3700_comphy_is_pll_locked(uint8_t comphy_index, uint32_t comphy_mode); int mvebu_3700_comphy_power_off(uint8_t comphy_index, uint32_t comphy_mode); int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode); #endif /* _PHY_COMPHY_3700_H */