GitLab

Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>
(cherry picked from commit 56b4b776c84f364384971c4cdfd66b4a2f0696d4)

Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Fuse doesn't want the callers to access the inode attributes without
issuing stat, and it is not assured that they are valid after lookup or
iget().
The inode attribute is critical for aufs, and aufs decided to call stat
every time for fuse.
Of course, it makes aufs slow. But when the branch fs is not fuse, stat
is not called.

Currently, only FUSE implements ->poll(), and aufs supports it.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Another ioctl feature, move-down.
The behaviour is, as you can guess, the opposite of copy-up.
The feature called FHSM (file-based hierarchical storage management, in
later commit) uses this ioctl aggressively.

See also the document in this commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

The permissions and attributes of a branch can be modified dynamically.
See also the document in this commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

->atomic_open() is another monster (the other is ->rename() of course).
It operates look-up, create, and open in a single method.
Strictly speaking the behaviour is not atomic from the branch fs's point
of view, while the atomicity is kept in aufs's. This is a second-best
approach. For details, refer to the design document in previous commit.

A simple list 'si_aopen' can be put into aufs inode object, but I don't
think it a good idea because the number of inodes is much larger than
the number of super_block. If I put it into inode, it can be an
un-interesting memory pressure I am afraid.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Following the design in another commit, aufs calls branch fs's
->atomic_open() if exits. Ideally it would be better to call
VFS:do_last, lookup_open() or atomic_open, but it is very hard for
aufs. This implementation is far from the best.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Implement several f_op functions for non-dir.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Support for XATTR and ACL including several branch attributes to ignore
the copy error around XATTR and ACL.

NFS always sets MS_POSIXACL regardless its mount option 'noacl.'
When MS_POSIXACL is set, generic_permission() calls check_acl() (via
acl_permission_check()) and gets -EOPNOTSUPP because the NFS branch is
mounted as 'noacl.'
In aufs, h_permission() should not call generic_permission() in this
case.
The similar thing happens in coping-up XATTR. vfs_getxattr_alloc()
returns -EOPNOTSUPP.

See also the document in this commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Implement i_op->get/setattr().
setattr() is another trigger of the copy-up. The file may or may not be
opened. And some of sub-functions are commonly used to XATTR operations
in later commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Implement i_op->rename().
This is a big monster and I don't like it.

In order to call d_move() in aufs lock section, FS_RENAME_DOES_D_MOVE is
set to fstype.f_flags.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Implement i_op->rmdir() with supporting logical deletion by whiteout
including all children.

As struct.txt in previous commit described, the target dir is renamed to
a whiteout-ed temporary unique name in rmdir(2), and then removed
asynchronously by the system global workqueue.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Implement i_op->unlink() with supporting logical deletion by whiteout.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Implement dir.i_op->get_link().
I am afraid there may exist the case skipping updating the inode atime.
It means the aufs inode atime may be reverted by the real fs inode atime
silently.  But I don't think it a big problem.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Implement basic sb_op->show_options(), statfs() and sync_fs() simply.
- show_options() doesn't print the default values (AuOpt_Def).
- statfs() will have an option to summarize the numbers from branches
  (in later commit).
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

The structure is very similar to iinfo and dinfo (in previous commits).
This commit is for non-dir files. For a directory, see later commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Implement exporting via NFS.
The file handle is rather large (40 bytes at most + the file handle on a
branch).
The non-virtual filesystems can use an anonymous (disconnected) dentry
as long as the inode is identified, but aufs needs a dentry with dinfo
which is usually constructed.  So aufs has to find or generate the
normal dentry from the file handle in decoding.  Eg. in aufs, there
should never be the anonymous dentry.

In decoding the file handle, if both of the dentry and the inode which
are corresponding the file handle are still in cache, then they are
returned immediately.  Otherwise aufs has to find the cached parent dir
from the file handle.  If the parent dir is not cached either, the aufs
tries these steps.
- decode the branch fs's file handle and get the parent dir
- generate the path of the parent dir on the branch
- convert the branch path to aufs's path
- lookup the inode number under the aufs' path
The last one is the slowest case.

exportfs_decode_fh() (actually reconnect_path()) acquires mutex, and
this behaviour violates the locking order between aufs si_rwsem.  This
is not a problem since internal exportfs_decode_fh() is called for the
branch fs.
Simply use lockdep_off/on to silence the lockdep message.

See also the document in later commit.
This is compiled only when CONFIG_AUFS_EXPORT is enabled.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Aufs can have multiple writable branches, and there are several
policies to select one among them.
This commit implements default "top-down-parent" for both of
creating-policy and copyup-policy.

See also the document in this commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

The functions for
- create the copy-up target file
- copy filedata
- copy metadata

In copying filedata, I had tried splice_direct() instead of repeating
read/write. Surprisingly, I could not see a big difference. So let's
keep this approach for a while. Someday SEEK_DATA/SEEK_HOLE become more
popular, it may help optimizing this read/write.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

The internal file read/write for copy-up in kernelspace.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Copy the inode attributes between branches.
See also the document in this commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

To create/delete/rename files including copy-up, aufs acquires several
locks on the branch fs internally. These lock/unlock operations are
consolidated into struct au_pin in this commit.
au_pin handles
- LOCKDEP class
- re-validate/verify
- suspend/resume HNOTIFY

See also lookup.txt in later commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Actually prepare the whiteout bases on the adding writable branch.
For details, refer to previous commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

The writable branch prepares a few files and dirs for whiteouts.
For branch filesystems which doesn't support link(2), there is "nolwh"
attribute. On the branch which is specified this attribute, aufs never
try link(2) for whitout and always creat(2) it.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

Aufs pseudo-link (plink) represents a virtual hardlink across the
branches. To implement the plink maintenance mode, aufs uses procfs.
See also the document in this commit.

There is an external user-space utility called 'auplink' in
aufs-util.git, which has these features.
- 'list' shows the pseudo-linked inode numbers and filenames.
- 'cpup' copies-up all pseudo-link to the writable branch.
- 'flush' calls 'cpup', and then 'mount -o remount,clean_plink=inum'
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

The whiteout represents a logical deletion.
Although the document in this commit mentioned about rmdir(2) and
rename(2) for dir, this commit doesn't contain such functions. They will
be added in later commits.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

XINO and XIB files are to maintain the inode numbers in aufs
(cf. struct.txt and aufs manual in aufs-util.git).

XINO file contains just a sequence of the inode numbers, and their
offset in the file is real_inum x sizeof(inum).  So the size is limited
by s_maxbytes of the filesystem where XINO file is located.  In order to
support the larger inum, aufs stores XINO files as an internal array.

Sometimes the size of XINO file can be a problem, ie. too big,
particularly when XINO files are located on tmpfs. In this case, another
separate patch tmpfs-ino.patch in aufs4-standalone.git is recommended
(as well as vfs-ino.patch). The patch makes tmpfs to maintain inode
number within itself and suppress its discontiguous distribution.

See also the document in next commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

For details, see previous commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>

The branch object is managed by the sbinfo object as an element of its
internal array. The iinfo and dinfo objects contain the branch id, and
it will be used to implement the correct order in branch management
(add/del).

See also the documents in this commit.
Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>