Skip to content

GitLab

Commit 97a57a7f authored by Igor Pecovnik's avatar Igor Pecovnik
Browse files

Move functions from submenu.sh and split network related into separate file

parent e1b59d57
Expand all Show whitespace changes
Inline Side-by-side
debian-config
View file @ 97a57a7f
......@@ -34,6 +34,7 @@ fi
[[ -f /usr/lib/armbian-config/jobs.sh ]] && source /usr/lib/armbian-config/jobs.sh || source ${BASH_SOURCE}-jobs
[[ -f /usr/lib/armbian-config/submenu.sh ]] && source /usr/lib/armbian-config/submenu.sh || source ${BASH_SOURCE}-submenu
[[ -f /usr/lib/armbian-config/functions.sh ]] && source /usr/lib/armbian-config/functions.sh || source ${BASH_SOURCE}-functions
[[ -f /usr/lib/armbian-config/functions-network.sh ]] && source /usr/lib/armbian-config/functions-network.sh || source ${BASH_SOURCE}-functions-network
......
debian-config-functions 100644 → 100755
View file @ 97a57a7f
......@@ -8,31 +8,55 @@
#-----------------------------------------------------------------------------------------------------------------------------------------#
#
# gather info about the board and start with loading menu
#
DIALOG_CANCEL=1
DIALOG_ESC=255
function main(){
[[ -f /etc/armbian-release ]] && source /etc/armbian-release && ARMBIAN="Armbian $VERSION $IMAGE_TYPE";
DISTRO=$(lsb_release -is)
DISTROID=$(lsb_release -sc)
KERNELID=$(uname -r)
[[ -z "${ARMBIAN// }" ]] && ARMBIAN="$DISTRO $DISTROID"
BACKTITLE="Configuration utility, $ARMBIAN, https://www.armbian.com"
TITLE="$BOARD_NAME "
DEFAULT_ADAPTER=$(ip -4 route ls | grep default | grep -Po '(?<=dev )(\S+)')
[[ -z "${DEFAULT_ADAPTER// }" ]] && DEFAULT_ADAPTER="lo"
OVERLAYDIR="/boot/dtb/overlay";
[[ "$LINUXFAMILY" == "sunxi64" ]] && OVERLAYDIR="/boot/dtb/allwinner/overlay";
dialog --backtitle "$BACKTITLE" --title "Please wait" --infobox "\nLoading Armbian configuration utility ... " 5 45
sleep 1
DIALOG_CANCEL=1
DIALOG_ESC=255
[[ -f /etc/armbian-release ]] && source /etc/armbian-release && ARMBIAN="Armbian $VERSION $IMAGE_TYPE";
DISTRO=$(lsb_release -is)
DISTROID=$(lsb_release -sc)
KERNELID=$(uname -r)
[[ -z "${ARMBIAN// }" ]] && ARMBIAN="$DISTRO $DISTROID"
BACKTITLE="Configuration utility, $ARMBIAN, https://www.armbian.com"
TITLE="$BOARD_NAME "
DEFAULT_ADAPTER=$(ip -4 route ls | grep default | grep -Po '(?<=dev )(\S+)')
[[ -z "${DEFAULT_ADAPTER// }" ]] && DEFAULT_ADAPTER="lo"
OVERLAYDIR="/boot/dtb/overlay";
[[ "$LINUXFAMILY" == "sunxi64" ]] && OVERLAYDIR="/boot/dtb/allwinner/overlay";
dialog --backtitle "$BACKTITLE" --title "Please wait" --infobox "\nLoading Armbian configuration utility ... " 5 45
sleep 1
#-----------------------------------------------------------------------------------------------------------------------------------------#
}
#
# check dpkg status of $1 -- currently only 'not installed at all' case catched
#
check_if_installed (){
local DPKG_Status="$(dpkg -s "$1" 2>/dev/null | awk -F": " '/^Status/ {print $2}')"
if [[ "X${DPKG_Status}" = "X" || "${DPKG_Status}" = *deinstall* ]]; then
return 1
else
return 0
fi
}
#
# check if package manager is doing something
#
function is_package_manager_running() {
fuser -s /var/lib/dpkg/lock
if [[ $? = 0 ]]; then
# 0 = true
......@@ -43,5 +67,280 @@ function is_package_manager_running() {
# 1 = false
return 1
fi
}
#
# show disclaimer
#
function beta_disclaimer ()
{
exec 3>&1
ACKNOWLEDGEMENT=$(dialog --nocancel --backtitle "$BACKTITLE" --no-collapse --title " Warning " \
--clear \--radiolist "\n$1.\n \n" 12 56 7 "Yes, I understand" "" off 2>&1 1>&3)
exec 3>&-
}
#
# show box
#
function show_box ()
{
dialog --colors --backtitle "$BACKTITLE" --no-collapse --title " $1 " --clear --msgbox "\n$2\n \n" $3 56
}
#-----------------------------------------------------------------------------------------------------------------------------------------#
#
# show description for MOTD files
#
function description
{
case $1 in
*header*)
echo "Big board logo and kernel info"
;;
*sysinfo*)
echo "Sysinfo - load, ip, memory, uptime, ..."
;;
*tips*)
echo "Shows tip of the day"
;;
*updates*)
echo "Display number of avaliable updates"
;;
*armbian-config*)
echo "Show command for system configuration"
;;
*autoreboot-warn*)
echo "Show warning when reboot is needed"
;;
*uk.armbian.com*)
echo "United Kingdom"
;;
*.armbian.com*)
echo "Estonia"
;;
*)
echo ""
;;
esac
}
#
# check if board has alternative kernels
#
function aval_kernel ()
{
IFS=$'\r\n'
GLOBIGNORE='*'
AVAL_KERNEL=($(apt-cache search --names-only '^linux-'$(lsb_release -cs)'-root.*.'$BOARD'*' \
| grep -w "$BOARD " | sed 's/.*(\(.*\))/\1/' | awk '{print $1}' | grep -v "$BRANCH" ))
local LIST=()
for i in "${AVAL_KERNEL[@]}"
do
LIST+=( "${i[0]//[[:blank:]]/}" "" )
done
LIST_LENGHT=$((${#LIST[@]}/2));
if [ "$LIST_LENGHT" -eq 1 ]; then
TARGET_BRANCH=${AVAL_KERNEL[0]}
else
exec 3>&1
TARGET_BRANCH=$(dialog --cancel-label "Cancel" --backtitle "$BACKTITLE" --no-collapse \
--title "Upgrade from $BRANCH to:" --clear --menu "" $((6+${LIST_LENGHT})) 40 15 "${LIST[@]}" 2>&1 1>&3)
exitstatus=$?;
exec 3>&-
fi
}
#
# check if board has alternative kernels
#
function aval_cubox ()
{
LIST=("imx6dl-hummingboard.dtb" "HB Solo/DualLite" "imx6dl-hummingboard-emmc-som-v15.dtb" "HB Solo/DualLite v1.5 with eMMC" "imx6dl-hummingboard-som-v15.dtb" "HB Solo/DualLite v1.5" \
"imx6dl-hummingboard2.dtb" "HB2 Solo/DualLite" "imx6dl-hummingboard2-emmc-som-v15.dtb" "HB2 Solo/DualLite v1.5 with eMMC" "imx6dl-hummingboard2-som-v15.dtb" "HB2 Solo/DualLite v1.5" \
"imx6q-hummingboard.dtb" "HB Dual/Quad" "imx6q-hummingboard-emmc-som-v15.dtb" "HB Dual/Quad v1.5 with eMMC" "imx6q-hummingboard-som-v15.dtb" "HB Dual/Quad v1.5" \
"imx6q-hummingboard2.dtb" "HB2 Dual/Quad" "imx6q-hummingboard2-emmc-som-v15.dtb" "HB2 Dual/Quad v1.5 with eMMC" "imx6q-hummingboard2-som-v15.dtb" "HB2 Dual/Quad v1.5" \
"imx6dl-cubox-i.dtb" "Cubox-i Solo/DualLite" "imx6dl-cubox-i-emmc-som-v15.dtb" "Cubox-i Solo/DualLite v1.5 with eMMC" "imx6dl-cubox-i-som-v15.dtb" "Cubox-i Solo/DualLite v1.5" \
"imx6q-cubox-i.dtb" "Cubox-i Dual/Quad" "imx6q-cubox-i-emmc-som-v15.dtb" "Cubox-i Dual/Quad v1.5 with eMMC" "imx6q-cubox-i-som-v15.dtb" "Cubox-i Dual/Quad v1.5")
LIST_LENGHT=$((${#LIST[@]}/2));
if [ "$LIST_LENGHT" -eq 1 ]; then
TARGET_BOARD=${AVAL_KERNEL[0]}
else
exec 3>&1
TARGET_BOARD=$(dialog --cancel-label "Cancel" --backtitle "$BACKTITLE" --no-collapse \
--title "Select board configuration" --clear --menu "" $((6+${LIST_LENGHT})) 80 25 "${LIST[@]}" 2>&1 1>&3)
exitstatus=$?;
exec 3>&-
fi
}
#
# select video modes for a10 and a20
#
function get_a20modes ()
{
IFS=$'\r'
GLOBIGNORE='*'
SCREEN_RESOLUTION=("1920x1080p60" "1280x720p60" "1920x1080p50" "1280x1024p60" "1024x768p60" "800x600p60" "640x480p60" "1360x768p60" "1440x900p60" "1680x1050p60")
local LIST=()
for i in "${SCREEN_RESOLUTION[@]}"
do
LIST+=( "${i[0]//[[:blank:]]/}" "" )
done
LIST_LENGHT=$((${#LIST[@]}/2));
#echo $LIST_LENGHT
#exit
if [ "$LIST_LENGHT" -eq 1 ]; then
SCREEN_RESOLUTION=${SCREEN_RESOLUTION[0]}
else
exec 3>&1
SCREEN_RESOLUTION=$(dialog --nocancel --backtitle "$BACKTITLE" --no-collapse \
--title "Select video mode" --clear --menu "" $((6+${LIST_LENGHT})) 25 $((1+${LIST_LENGHT})) "${LIST[@]}" 2>&1 1>&3)
exec 3>&-
fi
}
#
# select video modes for h3
#
function get_h3modes ()
{
IFS=$'\r\n'
GLOBIGNORE='*'
SCREEN_RESOLUTION=($(h3disp -i))
local LIST=()
for i in "${SCREEN_RESOLUTION[@]}"
do
LIST+=( "${i[0]//[[:blank:]]/}" "" )
done
LIST_LENGHT=$((${#LIST[@]}/2));
#echo $LIST_LENGHT
#exit
if [ "$LIST_LENGHT" -eq 1 ]; then
SCREEN_RESOLUTION=${SCREEN_RESOLUTION[0]}
else
exec 3>&1
SCREEN_RESOLUTION=$(dialog --nocancel --backtitle "$BACKTITLE" --no-collapse \
--title "Select video mode" --clear --menu "" $((6+${LIST_LENGHT})) 25 $((1+${LIST_LENGHT})) "${LIST[@]}" 2>&1 1>&3)
exec 3>&-
fi
}
#
# create or pick unprivileged user
#
function add_choose_user ()
{
IFS=$'\r\n'
GLOBIGNORE='*'
local USERS=($(awk -F'[/:]' '{if ($3 >= 1000 && $3 != 65534) print $1}' /etc/passwd))
local LIST=()
for i in "${USERS[@]}"
do
LIST+=( "${i[0]//[[:blank:]]/}" "" )
done
LIST_LENGHT=$((${#LIST[@]}/2));
if [ "$LIST_LENGHT" -eq 0 ]; then
dialog --backtitle "$BACKTITLE" --title " Notice " --msgbox "\nWe didn't find any unprivileged user with sudo rights which is required to run this service.\
\n\nPress enter to create one!" 10 48
read -t 0 temp
echo -e "\nPlease provide a username (eg. your forename) or leave blank for canceling user creation: \c"
read -e username
CHOSEN_USER="$(echo "$username" | tr '[:upper:]' '[:lower:]' | tr -d -c '[:alnum:]')"
[ -z "$CHOSEN_USER" ] && return
echo "Trying to add user $CHOSEN_USER"
adduser $CHOSEN_USER || return
elif [ "$LIST_LENGHT" -eq 1 ]; then
CHOSEN_USER=${USERS[0]}
else
exec 3>&1
CHOSEN_USER=$(dialog --nocancel --backtitle "$BACKTITLE" --no-collapse \
--title "Select unprivileged user" --clear --menu "" $((6+${LIST_LENGHT})) 40 15 "${LIST[@]}" 2>&1 1>&3)
exec 3>&-
fi
}
#
# configure armbian desktop
#
function configure_desktop ()
{
add_choose_user
if [ -n "$CHOSEN_USER" ]; then
# install desktop and nodm
debconf-apt-progress -- apt-get update
debconf-apt-progress -- apt-get -y install armbian-${DISTROID}-desktop
DEBIAN_FRONTEND=noninteractive debconf-apt-progress -- apt-get -y -qq install nodm
# add user to groups
for additionalgroup in sudo netdev audio video dialout plugdev bluetooth systemd-journal ssh; do
usermod -aG ${additionalgroup} ${CHOSEN_USER} 2>/dev/null
done
# fix for gksu in Xenial
touch /home/${CHOSEN_USER}/.Xauthority
cp -R /etc/skel/. /home/${CHOSEN_USER}
# set up profile sync daemon on desktop systems
which psd >/dev/null 2>&1
if [ $? -eq 0 ]; then
echo "${CHOSEN_USER} ALL=(ALL) NOPASSWD: /usr/bin/psd-overlay-helper" >> /etc/sudoers
touch /home/${CHOSEN_USER}/.activate_psd
fi
sed -i "s/NODM_USER=\(.*\)/NODM_USER=${CHOSEN_USER}/" /etc/default/nodm
sed -i "s/NODM_ENABLED=\(.*\)/NODM_ENABLED=true/g" /etc/default/nodm
chown -R ${CHOSEN_USER}:${CHOSEN_USER} /home/${CHOSEN_USER}/.
sleep 3
service nodm stop
sleep 1
service nodm start
fi
}
main "$@"
\ No newline at end of file
debian-config-functions-network 0 → 100755
View file @ 97a57a7f
#!/bin/bash
#
# Copyright (c) 2017 Igor Pecovnik, igor.pecovnik@gma**.com
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
# warranty of any kind, whether express or implied.
#
# check hostapd configuration. Return error or empty if o.k.
#
check_hostapd ()
{
systemctl daemon-reload
hostapd_error=""
[[ -n $1 && -n $2 ]] && dialog --title " $1 " --backtitle "$BACKTITLE" --no-collapse --colors --infobox "$2" 5 $((${#2}-3))
service hostapd stop
rm -f /var/run/hostapd/*
sleep 1
service hostapd start
sleep 6
if [[ "$(hostapd_cli ping 2> /dev/null| grep PONG)" == "PONG" ]]; then
hostapd_error=""
else
hostapd_error=$(hostapd /etc/hostapd.conf)
sleep 6
[[ -n $(echo $hostapd_error | grep "channel") ]] && hostapd_error="channel_restriction"
[[ -n $(echo $hostapd_error | grep "does not support" | grep "hw_mode") ]] && hostapd_error="hw_mode"
[[ -n $(echo $hostapd_error | grep "not found from the channel list" | grep "802.11g") ]] && hostapd_error="wrong_channel"
[[ -n $(echo $hostapd_error | grep "VHT") ]] && hostapd_error="unsupported_vht"
[[ -n $(echo $hostapd_error | grep " HT capability") ]] && hostapd_error="unsupported_ht"
fi
}
#
# check all possible wireless modes
#
function check_advanced_modes ()
{
sed '/### IEEE 802.11n/,/^### IEEE 802.11n/ s/^# *//' -i /etc/hostapd.conf
check_hostapd "Probing" "\n802.11n \Z1(150-300Mbps)\Z0"
# check HT capability
check_ht_capab
if [[ -z "$hostapd_error" ]]; then
sed '/### IEEE 802.11a\>/,/^### IEEE 802.11a\>/ s/^# *//' -i /etc/hostapd.conf
sed -i "s/^channel=.*/channel=40/" /etc/hostapd.conf
check_hostapd "Probing" "\n802.11a \Z1(5Ghz)\Z0"
if [[ "$hostapd_error" == "channel_restriction" ]]; then check_channels; fi
if [[ "$hostapd_error" == "channel_restriction" ]]; then
# revering configuration
sed -i "s/^channel=.*/channel=5/" /etc/hostapd.conf
sed '/## IEEE 802.11a\>/,/^## IEEE 802.11a\>/ s/.*/#&/' -i /etc/hostapd.conf
check_hostapd "Reverting" "\nWireless \Z1802.11a (5Ghz)\Z0 is not supported"
else
sed '/### IEEE 802.11ac\>/,/^### IEEE 802.11ac\>/ s/^# *//' -i /etc/hostapd.conf
# check VHT capability
check_vht_capab
if [[ "$hostapd_error" == "unsupported_vht" || "$hostapd_error" == "channel_restriction" ]]; then
# revering configuration
sed '/## IEEE 802.11ac\>/,/^## IEEE 802.11ac\>/ s/.*/#&/' -i /etc/hostapd.conf
check_hostapd "Reverting" "\nWireless 802.11ac \Z1(433Mbps x n @ 5Ghz)\Z0 is not supported"
if [[ "$hostapd_error" == "channel_restriction" ]]; then check_channels; fi
fi
fi
else
sed '/## IEEE 802.11n/,/^## IEEE 802.11n/ s/.*/#&/' -i /etc/hostapd.conf
fi
}
#
# create interface configuration section
#
function create_if_config() {
address=$(ip -4 addr show dev $1 | awk '/inet/ {print $2}' | cut -d'/' -f1)
netmask=$(ip -4 addr show dev $1 | awk '/inet/ {print $2}' | cut -d'/' -f2)
gateway=$(route -n | grep 'UG[ \t]' | awk '{print $2}' | sed -n '1p')
echo -e "# armbian-config created"
echo -e "source /etc/network/interfaces.d/*\n"
if [[ "$3" == "fixed" ]]; then
echo -e "# Local loopback\nauto lo\niface lo init loopback\n"
echo -e "# Interface $2\nauto $2\nallow-hotplug $2"
echo -e "iface $2 inet static\n\taddress $address\n\tnetmask $netmask\n\tgateway $gateway\n\tdns-nameservers 8.8.8.8"
fi
}
#
# reload network related services
#
function reload-nety() {
systemctl daemon-reload
if [[ "$1" == "reload" ]]; then WHATODO="Reloading services"; else WHATODO="Stopping services"; fi
(service network-manager stop; echo 10; sleep 1; service hostapd stop; echo 20; sleep 1; service dnsmasq stop; echo 30; sleep 1;\
[[ "$1" == "reload" ]] && service dnsmasq start && echo 60 && sleep 1 && service hostapd start && echo 80 && sleep 1;\
service network-manager start; echo 90; sleep 5;) | dialog --backtitle "$BACKTITLE" --title " $WHATODO " --gauge "" 6 70 0
systemctl restart systemd-resolved.service
}
#
# Check if something is running on port $1 and display info
#
check_port ()
{
[[ -n $(netstat -lnt | awk '$6 == "LISTEN" && $4 ~ ".'$1'"') ]] && dialog --backtitle "$BACKTITLE" --title "Checking service" \
--msgbox "\nIt looks good.\n\nThere is $2 service on port $1" 9 52
}
#
# check wifi high throughput
#
function check_ht_capab ()
{
declare -a arr=("[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40][SMPS-STATIC]" \
"[HT40-][SHORT-GI-40][SHORT-GI-40][DSSS_CCK-40]" "[SHORT-GI-20][SHORT-GI-40][HT40+]" "[DSSS_CK-40][HT20+]" "")
local j=0
for i in "${arr[@]}"
do
j=$((j+(100/${#arr[@]})))
echo $j | dialog --title " Probing HT " --colors --gauge "\nSeeking for optimal \Z1high throughput\Z0 settings." 8 50 0
sed -i "s/^ht_capab=.*/ht_capab=$i/" /etc/hostapd.conf
check_hostapd
if [[ "$hostapd_error" == "channel_restriction" ]]; then check_channels; fi
if [[ "$hostapd_error" == "" ]]; then break; fi
done
}
#
# check wifi high throughput
#
function check_vht_capab ()
{
declare -a arr=("[MAX-MPDU-11454][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP3]" "[MAX-MPDU-11454][SHORT-GI-80][RX-STBC-1][MAX-A-MPDU-LEN-EXP3]" "")
local j=0
for i in "${arr[@]}"
do
j=$((j+(100/${#arr[@]})))
echo $j | dialog --title " Probing VHT " --colors --gauge "\nSeeking for optimal \Z1very high throughput\Z0 settings." 8 54 0
sed -i "s/^vht_capab=.*/vht_capab=$i/" /etc/hostapd.conf
check_hostapd
if [[ "$hostapd_error" == "channel_restriction" ]]; then check_channels; fi
if [[ "$hostapd_error" == "" ]]; then break; fi
done
}
#
# check 5Ghz channels
#
function check_channels ()
{
declare -a arr=("36" "40")
for i in "${arr[@]}"
do
sed -i "s/^channel=.*/channel=$i/" /etc/hostapd.conf
check_hostapd "Probing" "\nChannel:\Z1 ${i}\Z0"
if [[ "$hostapd_error" != "channel_restriction" ]]; then break; fi
done
}
#
# edit ip address witing network manager
#
function nm_ip_editor ()
{
exec 3>&1
dialog --title " Static IP configuration" --backtitle "$BACKTITLE" --form "\nAdapter: $1
\n " 12 38 0 \
"Address:" 1 1 "$address" 1 15 15 0 \
"Netmask:" 2 1 "$netmask" 2 15 15 0 \
"Gateway:" 3 1 "$gateway" 3 15 15 0 \
2>&1 1>&3 | {
read -r address;read -r netmask;read -r gateway
if [[ $? = 0 ]]; then
localuuid=$(LC_ALL=C nmcli -f UUID,DEVICE connection show | grep $1 | awk '{print $1}')
nmcli con mod $localuuid ipv4.method manual ipv4.addresses "$address/$netmask" >/dev/null 2>&1
nmcli con mod $localuuid ipv4.method manual ipv4.gateway "$gateway" >/dev/null 2>&1
nmcli con mod $localuuid ipv4.dns "8.8.8.8,$gateway" >/dev/null 2>&1
nmcli con down $localuuid >/dev/null 2>&1
sleep 2
nmcli con up $localuuid >/dev/null 2>&1
fi
}
}
#
# edit ip address
#
function systemd_ip_editor ()
{
local filename="/etc/systemd/network/10-$1.network"
if [[ -f $filename ]]; then
sed -i '/Network/,$d' $filename
exec 3>&1
dialog --title " Static IP configuration" --backtitle "$BACKTITLE" --form "\nAdapter: $1
\n " 12 38 0 \
"Address:" 1 1 "$address" 1 15 15 0 \
"Netmask:" 2 1 "$netmask" 2 15 15 0 \
"Gateway:" 3 1 "$gateway" 3 15 15 0 \
2>&1 1>&3 | {
read -r address;read -r netmask;read -r gateway
if [[ $? = 0 ]]; then
echo -e "[Network]" >>$filename
echo -e "Address=$address" >> $filename
echo -e "Gateway=$gateway" >> $filename
echo -e "DNS=8.8.8.8" >> $filename
fi
}
fi
}
#
# edit ip address
#
function ip_editor ()
{
exec 3>&1
dialog --title " Static IP configuration" --backtitle "$BACKTITLE" --form "\nAdapter: $1
\n " 12 38 0 \
"Address:" 1 1 "$address" 1 15 15 0 \
"Netmask:" 2 1 "$netmask" 2 15 15 0 \
"Gateway:" 3 1 "$gateway" 3 15 15 0 \
2>&1 1>&3 | {
read -r address;read -r netmask;read -r gateway
if [[ $? = 0 ]]; then
echo -e "# armbian-config created\nsource /etc/network/interfaces.d/*\n" >$3
echo -e "# Local loopback\nauto lo\niface lo inet loopback\n" >> $3
echo -e "# Interface $2\nauto $2\nallow-hotplug $2\niface $2 inet static\
\n\taddress $address\n\tnetmask $netmask\n\tgateway $gateway\n\tdns-nameservers 8.8.8.8" >> $3
fi
}
}
#
# edit hostapd parameters
#
function wlan_edit_basic ()
{
source /etc/hostapd.conf
exec 3>&1
dialog --title "AP configuration" --backtitle "$BACKTITLE" --form "\nWPA2 enabled, \
advanced config: edit /etc/hostapd.conf\n " 12 58 0 \
"SSID:" 1 1 "$ssid" 1 31 22 0 \
"Password:" 2 1 "$wpa_passphrase" 2 31 22 0 \
"Channel:" 3 1 "$channel" 3 31 3 0 \
2>&1 1>&3 | {
read -r ssid;read -r wpa_passphrase;read -r channel
if [[ $? = 0 ]]; then
sed -i "s/^ssid=.*/ssid=$ssid/" /etc/hostapd.conf
sed -i "s/^wpa_passphrase=.*/wpa_passphrase=$wpa_passphrase/" /etc/hostapd.conf
sed -i "s/^channel=.*/channel=$channel/" /etc/hostapd.conf
wpa_psk=$(wpa_passphrase $ssid $wpa_passphrase | grep '^[[:blank:]]*[^[:blank:]#;]' | grep psk | cut -d= -f2-)
sed -i "s/^wpa_psk=.*/wpa_psk=$wpa_psk/" /etc/hostapd.conf
fi
}
}
#
# edit hostapd parameters
#
function wlan_edit ()
{
# select default interfaces if there is more than one
select_default_interface
dialog --title " Configuration edit " --colors --backtitle "$BACKTITLE" --help-button --help-label "Cancel" --yes-label "Basic" \
--no-label "Advanced" --yesno "\n\Z1Basic:\Z0 Change SSID, password and channel\n\n\Z1Advanced:\Z0 Edit /etc/hostapd.conf file" 9 70
if [[ $? = 0 ]]; then
wlan_edit_basic
elif [[ $? = 1 ]]; then
dialog --backtitle "$BACKTITLE" --title " Edit hostapd configuration /etc/hostapd.conf" --no-collapse \
--ok-label "Save" --editbox /etc/hostapd.conf 30 0 2> /etc/hostapd.conf.out
[[ $? = 0 ]] && mv /etc/hostapd.conf.out /etc/hostapd.conf && service hostapd restart
fi
}
#
# naming exceptions for packages
#
function exceptions ()
{
TARGET_FAMILY=$LINUXFAMILY
UBOOT_BRANCH=$TARGET_BRANCH # uboot naming is different
if [[ $TARGET_BRANCH == "default" ]]; then TARGET_BRANCH=""; else TARGET_BRANCH="-"$TARGET_BRANCH; fi
# pine64
if [[ $TARGET_FAMILY == pine64 ]]; then
TARGET_FAMILY="sunxi64"
fi
# allwinner legacy kernels
if [[ $TARGET_FAMILY == sun*i ]]; then
TARGET_FAMILY="sunxi"
if [[ $UBOOT_BRANCH == "default" ]]; then
TARGET_FAMILY=$(cat /proc/cpuinfo | grep "Hardware" | sed 's/^.*Allwinner //' | awk '{print $1;}')
fi
fi
}
#
# here we add wifi exceptions
#
function wlan_exceptions ()
{
reboot_module=false
[[ -n "$(lsmod | grep -w dhd)" && $1 = "on" ]] && \
echo 'options dhd op_mode=2' >/etc/modprobe.d/ap6212.conf && rmmod dhd && modprobe dhd
[[ -n "$(lsmod | grep -w dhd)" && $1 = "off" ]] && \
rm /etc/modprobe.d/ap6212.conf && rmmod dhd && modprobe dhd
# Cubietruck
[[ -n "$(lsmod | grep -w ap6210)" && $1 = "on" ]] && \
echo 'options ap6210 op_mode=2' >/etc/modprobe.d/ap6210.conf && reboot_module=true
[[ -n "$(lsmod | grep -w ap6210)" && $1 = "off" ]] && \
rm /etc/modprobe.d/ap6210.conf && reboot_module=true
}
#
# here add shaddy wifi adaptors
#
function check_and_warn ()
{
local shaddy=false
# blacklist
[[ "$LINUXFAMILY" == "sun8i" && $BOARD == "orangepizero" ]] && shaddy=true
[[ -n "$(lsmod | grep mt7601u)" ]] && shaddy=true
[[ -n "$(lsmod | grep r8188eu)" ]] && shaddy=true
# blacklist
if [[ "$shaddy" == "true" ]]; then
dialog --title " Warning " --ok-label " Accept and proceed " --msgbox '\nOne of your wireless drivers are on a black list due to poor quality.\n\nAP mode might not be possible!' 9 73
fi
}
#
# search for wlan interfaces and provide a selection menu if there are more than one
#
function get_wlan_interface ()
{
IFS=$'\r\n'
GLOBIGNORE='*'
WLAN_INTERFACES=($(LC_ALL=C nmcli --wait 10 dev status | grep wifi | grep disconnected |awk '{print $1}'))
local LIST=()
for i in "${WLAN_INTERFACES[@]}"
do
LIST+=( "${i[0]//[[:blank:]]/}" "" )
done
LIST_LENGHT=$((${#LIST[@]}/2));
if [ "$LIST_LENGHT" -eq 1 ]; then
WIRELESS_ADAPTER=${WLAN_INTERFACES[0]}
else
exec 3>&1
WIRELESS_ADAPTER=$(dialog --nocancel --backtitle "$BACKTITLE" --no-collapse \
--title "Select interface" --clear --menu "" $((6+${LIST_LENGHT})) 40 15 "${LIST[@]}" 2>&1 1>&3)
exec 3>&-
fi
}
#
# select interface if there is more than one
#
function select_default_interface ()
{
IFS=$'\r\n'
GLOBIGNORE='*'
local ADAPTER=($(ls /sys/class/net | grep -E -v 'lo|tun|bonding_masters|dummy0|bond0|sit0'))
local LIST=()
for i in "${ADAPTER[@]}"
do
local IPADDR=$(ip -4 addr show dev ${i[0]} | awk '/inet/ {print $2}' | cut -d'/' -f1)
[[ -n $IPADDR && $IPADDR != "172.24.1.1" ]] && LIST+=( "${i[0]//[[:blank:]]/}" "${IPADDR}" )
done
LIST_LENGHT=$((${#LIST[@]}/2));
if [ "$LIST_LENGHT" -eq 0 ]; then
DEFAULT_ADAPTER="lo"
elif [ "$LIST_LENGHT" -eq 1 ]; then
DEFAULT_ADAPTER=${ADAPTER[0]}
else
exec 3>&1
DEFAULT_ADAPTER=$(dialog --nocancel --backtitle "$BACKTITLE" --no-collapse \
--title "Select default interface" --clear --menu "" $((6+${LIST_LENGHT})) 40 15 "${LIST[@]}" 2>&1 1>&3)
exec 3>&-
fi
}
#
# search and connect to Bluetooth devices
#
function connect_bt_interface ()
{
IFS=$'\r\n'
GLOBIGNORE='*'
dialog --backtitle "$BACKTITLE" --title "Please wait" --infobox "\nDiscovering Bluetooth devices ... " 5 37
BT_INTERFACES=($(hcitool scan | sed '1d'))
local LIST=()
for i in "${BT_INTERFACES[@]}"
do
local a=$(echo ${i[0]//[[:blank:]]/} | sed -e 's/^\(.\{17\}\).*/\1/')
local b=${i[0]//$a/}
local b=$(echo $b | sed -e 's/^[ \t]*//')
LIST+=( "$a" "$b")
done
LIST_LENGHT=$((${#LIST[@]}/2));
if [ "$LIST_LENGHT" -eq 0 ]; then
BT_ADAPTER=${WLAN_INTERFACES[0]}
dialog --backtitle "$BACKTITLE" --title "Bluetooth" --msgbox "\nNo nearby Bluetooth devices were found!" 7 43
else
exec 3>&1
BT_ADAPTER=$(dialog --backtitle "$BACKTITLE" --no-collapse --title "Select interface" \
--clear --menu "" $((6+${LIST_LENGHT})) 50 15 "${LIST[@]}" 2>&1 1>&3)
exec 3>&-
if [[ $BT_ADAPTER != "" ]]; then
dialog --backtitle "$BACKTITLE" --title "Please wait" --infobox "\nConnecting to $BT_ADAPTER " 5 35
BT_EXEC=$(
expect -c 'set prompt "#";set address '$BT_ADAPTER';spawn bluetoothctl;expect -re $prompt;send "disconnect $address\r";
sleep 1;send "remove $address\r";sleep 1;expect -re $prompt;send "scan on\r";sleep 8;send "scan off\r";
expect "Controller";send "trust $address\r";sleep 2;send "pair $address\r";sleep 2;send "connect $address\r";
send_user "\nShould be paired now.\r";sleep 2;send "quit\r";expect eof')
echo "$BT_EXEC" > /tmp/bt-connect-debug.log
if [[ $(echo "$BT_EXEC" | grep "Connection successful" ) != "" ]]; then
dialog --backtitle "$BACKTITLE" --title "Bluetooth" --msgbox "\nYour device is ready to use!" 7 32
else
dialog --backtitle "$BACKTITLE" --title "Bluetooth" --msgbox "\nError connecting. Try again!" 7 32
fi
fi
fi
}
\ No newline at end of file
debian-config-submenu 100644 → 100755
View file @ 97a57a7f
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment