GitLab

Add the firmware file for the VIC falcon controller on
NVIDIA Tegra194.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

There's a number of firmware symlinks in the nvidia firmware
directory, move the creation of these to the WHENCE file.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
CC: Gourav Samaiya <gsamaiya@nvidia.com>
CC: Ben Skeggs <bskeggs@redhat.com>
CC: Alexandre Courbot <acourbot@nvidia.com>
CC: Ajay Gupta <ajayg@nvidia.com>
[Fix reference in WHENCE for nvidia/gm206/gr/sw_ctx.bin -- jwboyer@kernel.org]
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

These NVIDIA-signed firmwares are required to enable the graphics engine
on Turing TU11X GPUs.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

These NVIDIA-signed firmwares are required to enable the graphics engine
on Turing TU10X GPUs.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This version of the Tegra210 XUSB firmware contains a number of fixes to
improve compatibility with various devices.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a firmware file for the XUSB controller found on Tegra194. This is
version 60.06 of the Tegra194 XUSB firmware.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Now that the copy-firmware.sh script can create symlinks from the Link:
entries in the WHENCE file on the fly, remove the duplicate symlinks
from the filesystem.

One odd entry was intel/dsp_fw_cnl.bin which was listed both as symlink
and as a regular file. Both entries can be removed since the it's really
a symlink, so it will be recreated at installation time.

While at it, update the check_whence.py script to not look for the
existence of symlinks in the filesystem because they are created on the
fly at installation time by the copy_firmware.sh script.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a firmware file for the XUSB controller found on Tegra186.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Create additional symlinks for these firmware binaries so that the Linux
drivers can refer to them by a more consistent name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

The version of the SEC2 RTOS previously used does not function correctly
on certain newer GP10[2467] boards.

There are API differences between the two firmware versions, so both are
required to maintain forward/backward compatibility with the kernel code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These NVIDIA-signed firmwares are required to enable the Cypress
Type-C controller on TU10x GPUs.

FW versions:
	Secondary: 42
	Primary: 3.1.10
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>

These NVIDIA-signed firmwares are required to enable the graphics
engine on Volta GV100 GPUs.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This is being done to resolve issues being seen on a number of newer
laptop systems which aren't compatible with the older binaries.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

These NVIDIA-signed firmwares are required to enable the graphics
engine on Pascal GP108 GPUs.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add firmware files for the VIC falcon controller for Tegra124,
Tegra210 and Tegra186.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

It has been reported that the GP107 firmware would not pass signature
verification due to the wrong files being released. Replace them with
the proper files.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

These NVIDIA-signed firmwares are required to enable the graphics
engine on the Jetson TX2 board and other TX2-based devices.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

These NVIDIA-signed firmwares are required to enable the graphics
engine on Pascal GP10x GPUs.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

Add the signed PMU firmware for GM20B enabling falcon reboot.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

These NVIDIA-signed firmwares are required to enable the graphics
engine on Pascal GP100 GPUs.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

These NVIDIA-signed firmwares are required to enable the graphics
engine on Tegra X1.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

These NVIDIA-signed firmwares are required to enable the graphics
engine on Maxwell desktop GPUs.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

Update T210 XHCI firmware to v50.10.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Adds the firmware file for the GK20A GPU found in Tegra K1, and required
for Nouveau to run.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

Signed-off-by: Kyle McMartin <kyle@kernel.org>

Add firmware file for the T210 XHCI controller.  Note that this is only
compatible with T210 (T124 should continue using nvidia/tegra124/xusb.bin).
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Add firmware file for the T124 XHCI controller, along with the NVIDIA
license file.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>