Imported Upstream version 1.6.0

Makefile.am

@@ -16,12 +16,17 @@ SUBDIRS         += extensions
 # Depends on extensions/libext.a:
 SUBDIRS         += iptables
 
+if ENABLE_NFTABLES
+confdir		= $(sysconfdir)
+dist_conf_DATA	= etc/ethertypes
+endif
+
 .PHONY: tarball
 tarball:
 	rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION};
 	pushd ${top_srcdir} && git archive --prefix=${PACKAGE_TARNAME}-${PACKAGE_VERSION}/ HEAD | tar -C /tmp -x && popd;
 	pushd /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION} && ./autogen.sh && popd;
-	tar -C /tmp -cjf ${PACKAGE_TARNAME}-${PACKAGE_VERSION}.tar.bz2 --owner=root --group=root ${PACKAGE_TARNAME}-${PACKAGE_VERSION}/;
+	tar --exclude=*.t --exclude=iptables-test.py -C /tmp -cjf ${PACKAGE_TARNAME}-${PACKAGE_VERSION}.tar.bz2 --owner=root --group=root ${PACKAGE_TARNAME}-${PACKAGE_VERSION}/;
 	rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION};
 
 config.status: extensions/GNUmakefile.in \

build-aux/ar-lib

@@ -4,7 +4,7 @@
 me=ar-lib
 scriptversion=2012-03-01.08; # UTC
 
-# Copyright (C) 2010, 2012 Free Software Foundation, Inc.
+# Copyright (C) 2010-2013 Free Software Foundation, Inc.
 # Written by Peter Rosin <peda@lysator.liu.se>.
 #
 # This program is free software; you can redistribute it and/or modify

build-aux/compile

 #! /bin/sh
 # Wrapper for compilers which do not understand '-c -o'.
 
-scriptversion=2012-03-05.13; # UTC
+scriptversion=2012-10-14.11; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
-# Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -113,6 +112,11 @@ func_cl_dashl ()
       lib=$dir/$lib.lib
       break
     fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
   done
   IFS=$save_IFS
 

build-aux/config.guess

 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
 
-timestamp='2012-02-10'
+timestamp='2014-03-23'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -22,19 +20,17 @@ timestamp='2012-02-10'
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 #
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
+# Originally written by Per Bothner.
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -54,9 +50,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -138,6 +132,27 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+	;;
+esac
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -200,6 +215,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -302,7 +321,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -801,10 +820,13 @@ EOF
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
-    i*:MSYS*:*)
+    *:MSYS*:*)
 	echo ${UNAME_MACHINE}-pc-msys
 	exit ;;
     i*:windows32*:*)
@@ -852,21 +874,21 @@ EOF
 	exit ;;
     *:GNU:*:*)
 	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
 	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     aarch64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     aarch64_be:Linux:*:*)
 	UNAME_MACHINE=aarch64_be
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -879,59 +901,54 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
 	esac
 	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	else
 	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
 		| grep -q __ARM_PCS_VFP
 	    then
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
 	    else
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
 	    fi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     cris:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     crisv32:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     frv:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     hexagon:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:Linux:*:*)
-	LIBC=gnu
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -950,54 +967,63 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
-    or32:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
+	echo sparc-unknown-linux-${LIBC}
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
 	exit ;;
     sh64*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -1201,6 +1227,9 @@ EOF
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1227,19 +1256,31 @@ EOF
 	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    i386)
 	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
 	    if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
 		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
 		    (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
 		    grep IS_64BIT_ARCH >/dev/null
 		then
-		      UNAME_PROCESSOR="x86_64"
-		  fi
-		fi ;;
-	    unknown) UNAME_PROCESSOR=powerpc ;;
+		    case $UNAME_PROCESSOR in
+			i386) UNAME_PROCESSOR=x86_64 ;;
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
 		    esac
+		fi
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
+	fi
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
@@ -1256,7 +1297,7 @@ EOF
     NEO-?:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
+    NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1330,157 +1371,6 @@ EOF
 	exit ;;
 esac
 
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-	"4"
-#else
-	""
-#endif
-	); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
 cat >&2 <<EOF
 $0: unable to guess system type
 

build-aux/config.sub

 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
 
-timestamp='2012-04-18'
+timestamp='2014-09-11'
 
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, see <http://www.gnu.org/licenses/>.
@@ -26,11 +20,12 @@ timestamp='2012-04-18'
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -73,9 +68,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -123,7 +116,7 @@ esac
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
   knetbsd*-gnu* | netbsd*-gnu* | \
   kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
@@ -156,7 +149,7 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
+	-apple | -axis | -knuth | -cray | -microblaze*)
 		os=
 		basic_machine=$1
 		;;
@@ -259,10 +252,12 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
 	| be32 | be64 \
 	| bfin \
-	| c4x | clipper \
+	| c4x | c8051 | clipper \
 	| d10v | d30v | dlx | dsp16xx \
 	| epiphany \
 	| fido | fr30 | frv \
@@ -270,10 +265,11 @@ case $basic_machine in
 	| hexagon \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
+	| k1om \
 	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -287,23 +283,26 @@ case $basic_machine in
 	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa32r6 | mipsisa32r6el \
 	| mipsisa64 | mipsisa64el \
 	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64r6 | mipsisa64r6el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
 	| moxie \
 	| mt \
 	| msp430 \
 	| nds32 | nds32le | nds32be \
-	| nios | nios2 \
+	| nios | nios2 | nios2eb | nios2el \
 	| ns16k | ns32k \
-	| open8 \
-	| or32 \
+	| open8 | or1k | or1knd | or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
+	| riscv32 | riscv64 \
 	| rl78 | rx \
 	| score \
 	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
@@ -328,7 +327,7 @@ case $basic_machine in
 	c6x)
 		basic_machine=tic6x-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -370,13 +369,13 @@ case $basic_machine in
 	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
 	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| clipper-* | craynv-* | cydra-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
@@ -385,11 +384,13 @@ case $basic_machine in
 	| hexagon-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| k1om-* \
 	| le32-* | le64-* \
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -403,18 +404,22 @@ case $basic_machine in
 	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa32r6-* | mipsisa32r6el-* \
 	| mipsisa64-* | mipsisa64el-* \
 	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64r6-* | mipsisa64r6el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
 	| nds32-* | nds32le-* | nds32be-* \
-	| nios-* | nios2-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| open8-* \
+	| or1k*-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
@@ -788,11 +793,15 @@ case $basic_machine in
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
-	microblaze)
+	microblaze*)
 		basic_machine=microblaze-xilinx
 		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
 	mingw32)
-		basic_machine=i386-pc
+		basic_machine=i686-pc
 		os=-mingw32
 		;;
 	mingw32ce)
@@ -820,6 +829,10 @@ case $basic_machine in
 		basic_machine=powerpc-unknown
 		os=-morphos
 		;;
+	moxiebox)
+		basic_machine=moxie-unknown
+		os=-moxiebox
+		;;
 	msdos)
 		basic_machine=i386-pc
 		os=-msdos
@@ -828,7 +841,7 @@ case $basic_machine in
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
 	msys)
-		basic_machine=i386-pc
+		basic_machine=i686-pc
 		os=-msys
 		;;
 	mvs)
@@ -1019,7 +1032,11 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos)
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
 		basic_machine=i386-pc
 		os=-rdos
 		;;
@@ -1346,29 +1363,29 @@ case $os in
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
 	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1492,9 +1509,6 @@ case $os in
 	-aros*)
 		os=-aros
 		;;
-	-kaos*)
-		os=-kaos
-		;;
 	-zvmoe)
 		os=-zvmoe
 		;;
@@ -1543,6 +1557,9 @@ case $basic_machine in
 	c4x-* | tic4x-*)
 		os=-coff
 		;;
+	c8051-*)
+		os=-elf
+		;;
 	hexagon-*)
 		os=-elf
 		;;

build-aux/depcomp

 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2013-05-30.07; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -57,11 +56,65 @@ EOF
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
 # A tabulation character.
 tab='	'
 # A newline character.
 nl='
 '
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
 
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -75,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -109,7 +165,7 @@ if test "$depmode" = msvc7msys; then
 fi
 
 if test "$depmode" = xlc; then
-   # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
   gccflag=-qmakedep=gcc,-MF
   depmode=gcc
 fi
@@ -134,8 +190,7 @@ gcc3)
   done
   "$@"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -143,13 +198,17 @@ gcc3)
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -157,15 +216,14 @@ gcc)
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
 ## This next piece of magic avoids the "deleted header file" problem.
@@ -174,14 +232,14 @@ gcc)
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' "$nl" < "$tmpdepfile" |
 ## Some versions of gcc put a space before the ':'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.  hp depmode also adds that space, but also prefixes the VPATH
 ## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
     | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
@@ -200,8 +258,7 @@ sgi)
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -209,7 +266,6 @@ sgi)
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
@@ -217,19 +273,15 @@ sgi)
     # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
     tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr "$nl" ' ' >> "$depfile"
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
     echo >> "$depfile"
-
     # The second pass generates a dummy entry for each header file.
     tr ' ' "$nl" < "$tmpdepfile" \
       | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
       >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile"
   ;;
@@ -247,9 +299,8 @@ aix)
   # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -262,9 +313,7 @@ aix)
     "$@" -M
   fi
   stat=$?
-
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -273,65 +322,113 @@ aix)
   do
     test -f "$tmpdepfile" && break
   done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # '$object: dependent.h' and one to simply 'dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
   fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
-icc)
-  # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
-  # However on
-  #    $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
   #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using '\':
+  # and will wrap long lines using '\' :
   #    foo.o: sub/foo.c ... \
   #     sub/foo.h ... \
   #     ...
-  # tcc 0.9.26 (FIXME still under development at the moment of writing)
-  # will emit a similar output, but also prepend the continuation lines
-  # with horizontal tabulation characters.
-  "$@" -MD -MF "$tmpdepfile"
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
       stat=$?
-  if test $stat -eq 0; then :
+      # Release the lock.
+      rmdir "$lockdir"
+      break
     else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
-  # Each line is of the form 'foo.o: dependent.h',
-  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
   # Do two passes, one to just change these to
-  # '$object: dependent.h' and one to simply 'dependent.h:'.
-  sed -e "s/^[ $tab][ $tab]*/  /" -e "s,^[^:]*:,$object :," \
-    < "$tmpdepfile" > "$depfile"
-  sed '
-    s/[ '"$tab"'][ '"$tab"']*/ /g
-    s/^ *//
-    s/ *\\*$//
-    s/^[^:]*: *//
-    /^$/d
-    /:$/d
-    s/$/ :/
-  ' < "$tmpdepfile" >> "$depfile"
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -342,9 +439,8 @@ hp2)
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from  "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -355,8 +451,7 @@ hp2)
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -366,7 +461,7 @@ hp2)
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add 'dependent.h:' lines.
     sed -ne '2,${
                s/^ *//
@@ -375,7 +470,7 @@ hp2)
                p
              }' "$tmpdepfile" >> "$depfile"
   else
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
@@ -386,55 +481,40 @@ tru64)
   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
   # dependencies in 'foo.d' instead, so we check for that too.
   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from  "$object"
+  set_base_from "$object"
 
   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
     # in $dir$base.o.d.  We have to check for both files, because
     # one of the two compilations can be disabled.  We should prefer
     # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
     # automatically cleaned when .libs/ is deleted, while ignoring
     # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
     "$@" -Wc,-MD
   else
-      tmpdepfile1=$dir$base.o.d
+    tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir$base.d
     tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
     "$@" -MD
   fi
 
   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
   do
     test -f "$tmpdepfile" && break
   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
   ;;
 
 msvc7)
@@ -446,8 +526,7 @@ msvc7)
   "$@" $showIncludes > "$tmpdepfile"
   stat=$?
   grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -473,6 +552,7 @@ $ {
   G
   p
 }' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
   rm -f "$tmpdepfile"
   ;;
 
@@ -524,13 +604,14 @@ dashmstdout)
   # in the target name.  This is to cope with DOS-style filenames:
   # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -583,10 +664,12 @@ makedepend)
   # makedepend may prepend the VPATH from the source file name to the object.
   # No need to regex-escape $object, excess matching of '.' is harmless.
   sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -622,10 +705,10 @@ cpp)
     esac
   done
 
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"

build-aux/install-sh

 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@ scriptversion=2011-01-19.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,7 +156,7 @@ while test $# -ne 0; do
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
+	# Protect names problematic for 'test' and other utilities.
 	case $dst_arg in
 	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
 	esac
@@ -190,7 +190,7 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
+    # Protect names problematic for 'test' and other utilities.
     case $dst_arg in
       -* | [=\(\)!]) dst_arg=./$dst_arg;;
     esac
@@ -202,7 +202,7 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
@@ -240,7 +240,7 @@ fi
 
 for src
 do
-  # Protect names problematic for `test' and other utilities.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
     -* | [=\(\)!]) src=./$src;;
   esac
@@ -354,7 +354,7 @@ do
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in

build-aux/ltmain.sh

@@ -70,7 +70,7 @@
 #         compiler:		$LTCC
 #         compiler flags:		$LTCFLAGS
 #         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.2
+#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.11
 #         automake:	$automake_version
 #         autoconf:	$autoconf_version
 #
@@ -80,7 +80,7 @@
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION="2.4.2 Debian-2.4.2-1.2"
+VERSION="2.4.2 Debian-2.4.2-1.11"
 TIMESTAMP=""
 package_revision=1.3337
 

build-aux/missing

 #! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2012-01-06.13; # UTC
+scriptversion=2013-10-28.13; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -26,68 +25,40 @@ scriptversion=2012-01-06.13; # UTC
 # the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
+  echo 1>&2 "Try '$0 --help' for more information"
   exit 1
 fi
 
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
+case $1 in
 
-msg="missing on your system"
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
 
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
+  --run)
+    # Back-compat with the calling convention used by older automake.
     shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
     ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
 
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
 
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
@@ -99,228 +70,141 @@ Send bug reports to <bug-automake@gnu.org>."
     ;;
 
   -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
+# Run the given program, remember its exit status.
+"$@"; st=$?
 
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
 
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
 
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
       ;;
+  esac
+}
 
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
     autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
       ;;
-
     autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
       ;;
-
     automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
       ;;
-
    autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
       ;;
-
     bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
       ;;
-
     lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
       ;;
-
     help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
     ;;
-
     makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
       ;;
-
     *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
       ;;
-esac
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
 
-exit 0
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

build-aux/ylwrap

+#! /bin/sh
+# ylwrap - wrapper for lex/yacc invocations.
+
+scriptversion=2013-01-12.17; # UTC
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+get_dirname ()
+{
+  case $1 in
+    */*|*\\*) printf '%s\n' "$1" | sed -e 's|\([\\/]\)[^\\/]*$|\1|';;
+    # Otherwise,  we want the empty string (not ".").
+  esac
+}
+
+# guard FILE
+# ----------
+# The CPP macro used to guard inclusion of FILE.
+guard ()
+{
+  printf '%s\n' "$1"                                                    \
+    | sed                                                               \
+        -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'   \
+        -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'                        \
+        -e 's/__*/_/g'
+}
+
+# quote_for_sed [STRING]
+# ----------------------
+# Return STRING (or stdin) quoted to be used as a sed pattern.
+quote_for_sed ()
+{
+  case $# in
+    0) cat;;
+    1) printf '%s\n' "$1";;
+  esac \
+    | sed -e 's|[][\\.*]|\\&|g'
+}
+
+case "$1" in
+  '')
+    echo "$0: No files given.  Try '$0 --help' for more information." 1>&2
+    exit 1
+    ;;
+  --basedir)
+    basedir=$2
+    shift 2
+    ;;
+  -h|--h*)
+    cat <<\EOF
+Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
+
+Wrapper for lex/yacc invocations, renaming files as desired.
+
+  INPUT is the input file
+  OUTPUT is one file PROG generates
+  DESIRED is the file we actually want instead of OUTPUT
+  PROGRAM is program to run
+  ARGS are passed to PROG
+
+Any number of OUTPUT,DESIRED pairs may be used.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v|--v*)
+    echo "ylwrap $scriptversion"
+    exit $?
+    ;;
+esac
+
+
+# The input.
+input=$1
+shift
+# We'll later need for a correct munging of "#line" directives.
+input_sub_rx=`get_dirname "$input" | quote_for_sed`
+case $input in
+  [\\/]* | ?:[\\/]*)
+    # Absolute path; do nothing.
+    ;;
+  *)
+    # Relative path.  Make it absolute.
+    input=`pwd`/$input
+    ;;
+esac
+input_rx=`get_dirname "$input" | quote_for_sed`
+
+# Since DOS filename conventions don't allow two dots,
+# the DOS version of Bison writes out y_tab.c instead of y.tab.c
+# and y_tab.h instead of y.tab.h. Test to see if this is the case.
+y_tab_nodot=false
+if test -f y_tab.c || test -f y_tab.h; then
+  y_tab_nodot=true
+fi
+
+# The parser itself, the first file, is the destination of the .y.c
+# rule in the Makefile.
+parser=$1
+
+# A sed program to s/FROM/TO/g for all the FROM/TO so that, for
+# instance, we rename #include "y.tab.h" into #include "parse.h"
+# during the conversion from y.tab.c to parse.c.
+sed_fix_filenames=
+
+# Also rename header guards, as Bison 2.7 for instance uses its header
+# guard in its implementation file.
+sed_fix_header_guards=
+
+while test $# -ne 0; do
+  if test x"$1" = x"--"; then
+    shift
+    break
+  fi
+  from=$1
+  # Handle y_tab.c and y_tab.h output by DOS
+  if $y_tab_nodot; then
+    case $from in
+      "y.tab.c") from=y_tab.c;;
+      "y.tab.h") from=y_tab.h;;
+    esac
+  fi
+  shift
+  to=$1
+  shift
+  sed_fix_filenames="${sed_fix_filenames}s|"`quote_for_sed "$from"`"|$to|g;"
+  sed_fix_header_guards="${sed_fix_header_guards}s|"`guard "$from"`"|"`guard "$to"`"|g;"
+done
+
+# The program to run.
+prog=$1
+shift
+# Make any relative path in $prog absolute.
+case $prog in
+  [\\/]* | ?:[\\/]*) ;;
+  *[\\/]*) prog=`pwd`/$prog ;;
+esac
+
+dirname=ylwrap$$
+do_exit="cd '`pwd`' && rm -rf $dirname > /dev/null 2>&1;"' (exit $ret); exit $ret'
+trap "ret=129; $do_exit" 1
+trap "ret=130; $do_exit" 2
+trap "ret=141; $do_exit" 13
+trap "ret=143; $do_exit" 15
+mkdir $dirname || exit 1
+
+cd $dirname
+
+case $# in
+  0) "$prog" "$input" ;;
+  *) "$prog" "$@" "$input" ;;
+esac
+ret=$?
+
+if test $ret -eq 0; then
+  for from in *
+  do
+    to=`printf '%s\n' "$from" | sed "$sed_fix_filenames"`
+    if test -f "$from"; then
+      # If $2 is an absolute path name, then just use that,
+      # otherwise prepend '../'.
+      case $to in
+        [\\/]* | ?:[\\/]*) target=$to;;
+        *) target=../$to;;
+      esac
+
+      # Do not overwrite unchanged header files to avoid useless
+      # recompilations.  Always update the parser itself: it is the
+      # destination of the .y.c rule in the Makefile.  Divert the
+      # output of all other files to a temporary file so we can
+      # compare them to existing versions.
+      if test $from != $parser; then
+        realtarget=$target
+        target=tmp-`printf '%s\n' "$target" | sed 's|.*[\\/]||g'`
+      fi
+
+      # Munge "#line" or "#" directives.  Don't let the resulting
+      # debug information point at an absolute srcdir.  Use the real
+      # output file name, not yy.lex.c for instance.  Adjust the
+      # include guards too.
+      sed -e "/^#/!b"                           \
+          -e "s|$input_rx|$input_sub_rx|"       \
+          -e "$sed_fix_filenames"               \
+          -e "$sed_fix_header_guards"           \
+        "$from" >"$target" || ret=$?
+
+      # Check whether files must be updated.
+      if test "$from" != "$parser"; then
+        if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
+          echo "$to is unchanged"
+          rm -f "$target"
+        else
+          echo "updating $to"
+          mv -f "$target" "$realtarget"
+        fi
+      fi
+    else
+      # A missing file is only an error for the parser.  This is a
+      # blatant hack to let us support using "yacc -d".  If -d is not
+      # specified, don't fail when the header file is "missing".
+      if test "$from" = "$parser"; then
+        ret=1
+      fi
+    fi
+  done
+fi
+
+# Remove the directory.
+cd ..
+rm -rf $dirname
+
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

config.h.in

@@ -49,9 +49,6 @@
    */
 #undef LT_OBJDIR
 
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-#undef NO_MINUS_C_MINUS_O
-
 /* Name of package */
 #undef PACKAGE
 
@@ -81,3 +78,7 @@
 
 /* Version number of package */
 #undef VERSION
+
+/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
+   `char[]'. */
+#undef YYTEXT_POINTER

configure.ac

 
-AC_INIT([iptables], [1.4.21])
+AC_INIT([iptables], [1.6.0])
 
 # See libtool.info "Libtool's versioning system"
-libxtables_vcurrent=10
+libxtables_vcurrent=11
 libxtables_vage=0
 
 AC_CONFIG_AUX_DIR([build-aux])
@@ -53,13 +53,16 @@ AC_ARG_ENABLE([libipq],
 	[enable_libipq="$enableval"], [enable_libipq="no"])
 AC_ARG_ENABLE([bpf-compiler],
 	AS_HELP_STRING([--enable-bpf-compiler], [Build bpf compiler]),
-	[enable_bpfc="yes"], [enable_bpfc="no"])
+	[enable_bpfc="$enableval"], [enable_bpfc="no"])
 AC_ARG_ENABLE([nfsynproxy],
 	AS_HELP_STRING([--enable-nfsynproxy], [Build SYNPROXY configuration tool]),
-	[enable_nfsynproxy="yes"], [enable_nfsynproxy="no"])
+	[enable_nfsynproxy="$enableval"], [enable_nfsynproxy="no"])
 AC_ARG_WITH([pkgconfigdir], AS_HELP_STRING([--with-pkgconfigdir=PATH],
 	[Path to the pkgconfig directory [[LIBDIR/pkgconfig]]]),
 	[pkgconfigdir="$withval"], [pkgconfigdir='${libdir}/pkgconfig'])
+AC_ARG_ENABLE([nftables],
+	AS_HELP_STRING([--disable-nftables], [Do not build nftables compat]),
+	[enable_nftables="$enableval"], [enable_nftables="yes"])
 
 libiptc_LDFLAGS2="";
 AX_CHECK_LINKER_FLAGS([-Wl,--no-as-needed],
@@ -75,7 +78,12 @@ AC_LINK_IFELSE([AC_LANG_SOURCE([int main(void) {}])],
 )
 LDFLAGS="$saved_LDFLAGS";
 
-blacklist_modules="";
+blacklist_modules=""
+blacklist_x_modules=""
+blacklist_b_modules=""
+blacklist_a_modules=""
+blacklist_4_modules=""
+blacklist_6_modules=""
 
 AC_CHECK_HEADERS([linux/dccp.h linux/ip_vs.h linux/magic.h linux/proc_fs.h])
 if test "$ac_cv_header_linux_dccp_h" != "yes"; then
@@ -94,7 +102,6 @@ if test "$nfconntrack" -ne 1; then
 	echo "WARNING: libnetfilter_conntrack not found, connlabel match will not be built";
 fi;
 
-AC_SUBST([blacklist_modules])
 AC_CHECK_SIZEOF([struct ip6_hdr], [], [#include <netinet/ip6.h>])
 
 AM_CONDITIONAL([ENABLE_STATIC], [test "$enable_static" = "yes"])
@@ -106,6 +113,7 @@ AM_CONDITIONAL([ENABLE_DEVEL], [test "$enable_devel" = "yes"])
 AM_CONDITIONAL([ENABLE_LIBIPQ], [test "$enable_libipq" = "yes"])
 AM_CONDITIONAL([ENABLE_BPFC], [test "$enable_bpfc" = "yes"])
 AM_CONDITIONAL([ENABLE_SYNCONF], [test "$enable_nfsynproxy" = "yes"])
+AM_CONDITIONAL([ENABLE_NFTABLES], [test "$enable_nftables" = "yes"])
 
 if test "x$enable_bpfc" = "xyes" || test "x$enable_nfsynproxy" = "xyes"; then
 	AC_CHECK_LIB(pcap, pcap_compile,, AC_MSG_ERROR(missing libpcap library required by bpf compiler or nfsynproxy tool))
@@ -115,6 +123,58 @@ PKG_CHECK_MODULES([libnfnetlink], [libnfnetlink >= 1.0],
 	[nfnetlink=1], [nfnetlink=0])
 AM_CONDITIONAL([HAVE_LIBNFNETLINK], [test "$nfnetlink" = 1])
 
+if test "x$enable_nftables" = "xyes"; then
+	PKG_CHECK_MODULES([libmnl], [libmnl >= 1.0], [mnl=1], [mnl=0])
+
+	PKG_CHECK_MODULES([libnftnl], [libnftnl >= 1.0.5], [nftables=1], [nftables=0])
+
+	AM_PROG_LEX
+	AC_PROG_YACC
+
+	if test -z "$ac_cv_prog_YACC"
+	then
+		echo "*** Error: No suitable bison/yacc found. ***"
+		echo "    Please install the 'bison' package."
+		exit 1
+	fi
+	if test -z "$ac_cv_prog_LEX"
+	then
+	        echo "*** Error: No suitable flex/lex found. ***"
+	        echo "    Please install the 'flex' package."
+	        exit 1
+	fi
+
+	AC_MSG_CHECKING(flex version)
+	flex_version=`$ac_cv_prog_LEX --version | sed 's/version//g' | awk '/flex/ {print $2}'`
+	flex_major=`echo $flex_version| cut -d . -f 1`
+	flex_minor=`echo $flex_version| cut -d . -f 2`
+	flex_rev=`echo $flex_version| cut -d . -f 3`
+
+	if test "$flex_major" -eq "2" && test "$flex_minor" -eq "5" && test "$flex_rev" -ge "33"; then
+		AC_MSG_RESULT([$flex_version. OK])
+	else
+		AC_MSG_WARN([flex version $flex_version found.
+		Version 2.5.33 or greater is required. You may experience problems
+		while compilating the nftables compatibility layer for iptables.
+		Please, consider to upgrade flex.])
+	fi
+fi
+
+AM_CONDITIONAL([HAVE_LIBMNL], [test "$mnl" = 1])
+AM_CONDITIONAL([HAVE_LIBNFTNL], [test "$nftables" = 1])
+
+if test "$nftables" != 1; then
+	blacklist_b_modules="$blacklist_b_modules limit mark nflog mangle"
+	blacklist_a_modules="$blacklist_a_modules mangle"
+fi
+
+AC_SUBST([blacklist_modules])
+AC_SUBST([blacklist_x_modules])
+AC_SUBST([blacklist_b_modules])
+AC_SUBST([blacklist_a_modules])
+AC_SUBST([blacklist_4_modules])
+AC_SUBST([blacklist_6_modules])
+
 regular_CFLAGS="-Wall -Waggregate-return -Wmissing-declarations \
 	-Wmissing-prototypes -Wredundant-decls -Wshadow -Wstrict-prototypes \
 	-Winline -pipe";
@@ -182,6 +242,7 @@ Iptables Configuration:
   Large file support:			${enable_largefile}
   BPF utils support:			${enable_bpfc}
   nfsynproxy util support:		${enable_nfsynproxy}
+  nftables support:			${enable_nftables}
 
 Build parameters:
   Put plugins into executable (static):	${enable_static}

etc/ethertypes

+#
+# Ethernet frame types
+#		This file describes some of the various Ethernet
+#		protocol types that are used on Ethernet networks.
+#
+# This list could be found on:
+#         http://www.iana.org/assignments/ethernet-numbers
+#         http://www.iana.org/assignments/ieee-802-numbers
+#
+# <name>    <hexnumber> <alias1>...<alias35> #Comment
+#
+IPv4	 	0800  	ip ip4 		# Internet IP (IPv4)
+X25		0805
+ARP		0806	ether-arp	#
+FR_ARP		0808    		# Frame Relay ARP        [RFC1701]
+BPQ		08FF			# G8BPQ AX.25 Ethernet Packet
+DEC		6000			# DEC Assigned proto
+DNA_DL		6001			# DEC DNA Dump/Load
+DNA_RC		6002			# DEC DNA Remote Console
+DNA_RT		6003			# DEC DNA Routing
+LAT		6004			# DEC LAT
+DIAG		6005			# DEC Diagnostics
+CUST		6006			# DEC Customer use
+SCA		6007			# DEC Systems Comms Arch
+TEB		6558			# Trans Ether Bridging   [RFC1701]
+RAW_FR  	6559			# Raw Frame Relay        [RFC1701]
+RARP		8035			# Reverse ARP            [RFC903]
+AARP		80F3			# Appletalk AARP
+ATALK		809B			# Appletalk
+802_1Q		8100	8021q 1q 802.1q	dot1q # 802.1Q Virtual LAN tagged frame
+IPX		8137			# Novell IPX
+NetBEUI		8191			# NetBEUI
+IPv6		86DD	ip6 		# IP version 6
+PPP		880B			# PPP
+ATMMPOA		884C			# MultiProtocol over ATM
+PPP_DISC	8863			# PPPoE discovery messages
+PPP_SES		8864			# PPPoE session messages
+ATMFATE		8884			# Frame-based ATM Transport over Ethernet
+LOOP		9000	loopback 	# loop proto

etc/xtables.conf

+family ipv4 {
+	table raw {
+		chain PREROUTING hook NF_INET_PRE_ROUTING prio -300
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio -300
+	}
+
+	table mangle {
+		chain PREROUTING hook NF_INET_PRE_ROUTING prio -150
+		chain INPUT hook NF_INET_LOCAL_IN prio -150
+		chain FORWARD hook NF_INET_FORWARD prio -150
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio -150
+		chain POSTROUTING hook NF_INET_POST_ROUTING prio -150
+	}
+
+	table filter {
+		chain INPUT hook NF_INET_LOCAL_IN prio 0
+		chain FORWARD hook NF_INET_FORWARD prio 0
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio 0
+	}
+
+	table nat {
+		chain PREROUTING hook NF_INET_PRE_ROUTING prio -100
+		chain INPUT hook NF_INET_LOCAL_IN prio -100
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio 100
+		chain POSTROUTING hook NF_INET_POST_ROUTING prio 100
+	}
+
+	table security {
+		chain INPUT hook NF_INET_LOCAL_IN prio 50
+		chain FORWARD hook NF_INET_FORWARD prio 50
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio 50
+	}
+}
+
+family ipv6 {
+	table raw {
+		chain PREROUTING hook NF_INET_PRE_ROUTING prio -300
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio -300
+	}
+
+	table mangle {
+		chain PREROUTING hook NF_INET_PRE_ROUTING prio -150
+		chain INPUT hook NF_INET_LOCAL_IN prio -150
+		chain FORWARD hook NF_INET_FORWARD prio -150
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio -150
+		chain POSTROUTING hook NF_INET_POST_ROUTING prio -150
+	}
+
+	table filter {
+		chain INPUT hook NF_INET_LOCAL_IN prio 0
+		chain FORWARD hook NF_INET_FORWARD prio 0
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio 0
+	}
+
+	table nat {
+		chain PREROUTING hook NF_INET_PRE_ROUTING prio -100
+		chain INPUT hook NF_INET_LOCAL_IN prio -100
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio 100
+		chain POSTROUTING hook NF_INET_POST_ROUTING prio 100
+	}
+
+	table security {
+		chain INPUT hook NF_INET_LOCAL_IN prio 50
+		chain FORWARD hook NF_INET_FORWARD prio 50
+		chain OUTPUT hook NF_INET_LOCAL_OUT prio 50
+	}
+}
+
+family arp {
+	table filter {
+		chain INPUT hook NF_ARP_IN prio 0
+		chain FORWARD hook NF_ARP_FORWARD prio 0
+		chain OUTPUT hook NF_ARP_OUT prio 0
+	}
+}
\ No newline at end of file

extensions/GNUmakefile.in

@@ -21,7 +21,7 @@ regular_CPPFLAGS   = @regular_CPPFLAGS@
 kinclude_CPPFLAGS  = @kinclude_CPPFLAGS@
 
 AM_CFLAGS       = ${regular_CFLAGS}
-AM_CPPFLAGS     = ${regular_CPPFLAGS} -I${top_builddir}/include -I${top_builddir} -I${top_srcdir}/include ${kinclude_CPPFLAGS} ${CPPFLAGS}
+AM_CPPFLAGS     = ${regular_CPPFLAGS} -I${top_builddir}/include -I${top_builddir} -I${top_srcdir}/include ${kinclude_CPPFLAGS} ${CPPFLAGS} @libnetfilter_conntrack_CFLAGS@ @libnftnl_CFLAGS@
 AM_DEPFLAGS     = -Wp,-MMD,$(@D)/.$(@F).d,-MT,$@
 AM_LDFLAGS      = @noundef_LDFLAGS@
 
@@ -39,16 +39,24 @@ endif
 #	Wildcard module list
 #
 pfx_build_mod := $(patsubst ${srcdir}/libxt_%.c,%,$(sort $(wildcard ${srcdir}/libxt_*.c)))
+pfb_build_mod := $(patsubst ${srcdir}/libebt_%.c,%,$(sort $(wildcard ${srcdir}/libebt_*.c)))
+pfa_build_mod := $(patsubst ${srcdir}/libarpt_%.c,%,$(sort $(wildcard ${srcdir}/libarpt_*.c)))
 pfx_symlinks  := NOTRACK state
 @ENABLE_IPV4_TRUE@ pf4_build_mod := $(patsubst ${srcdir}/libipt_%.c,%,$(sort $(wildcard ${srcdir}/libipt_*.c)))
 @ENABLE_IPV6_TRUE@ pf6_build_mod := $(patsubst ${srcdir}/libip6t_%.c,%,$(sort $(wildcard ${srcdir}/libip6t_*.c)))
-pfx_build_mod := $(filter-out @blacklist_modules@,${pfx_build_mod})
-pf4_build_mod := $(filter-out @blacklist_modules@,${pf4_build_mod})
-pf6_build_mod := $(filter-out @blacklist_modules@,${pf6_build_mod})
+pfx_build_mod := $(filter-out @blacklist_modules@ @blacklist_x_modules@,${pfx_build_mod})
+pfb_build_mod := $(filter-out @blacklist_modules@ @blacklist_b_modules@,${pfb_build_mod})
+pfa_build_mod := $(filter-out @blacklist_modules@ @blacklist_a_modules@,${pfa_build_mod})
+pf4_build_mod := $(filter-out @blacklist_modules@ @blacklist_4_modules@,${pf4_build_mod})
+pf6_build_mod := $(filter-out @blacklist_modules@ @blacklist_6_modules@,${pf6_build_mod})
 pfx_objs      := $(patsubst %,libxt_%.o,${pfx_build_mod})
+pfb_objs      := $(patsubst %,libebt_%.o,${pfb_build_mod})
+pfa_objs      := $(patsubst %,libarpt_%.o,${pfa_build_mod})
 pf4_objs      := $(patsubst %,libipt_%.o,${pf4_build_mod})
 pf6_objs      := $(patsubst %,libip6t_%.o,${pf6_build_mod})
 pfx_solibs    := $(patsubst %,libxt_%.so,${pfx_build_mod} ${pfx_symlinks})
+pfb_solibs    := $(patsubst %,libebt_%.so,${pfb_build_mod})
+pfa_solibs    := $(patsubst %,libarpt_%.so,${pfa_build_mod})
 pf4_solibs    := $(patsubst %,libipt_%.so,${pf4_build_mod})
 pf6_solibs    := $(patsubst %,libip6t_%.so,${pf6_build_mod})
 
@@ -56,13 +64,15 @@ pf6_solibs    := $(patsubst %,libip6t_%.so,${pf6_build_mod})
 #
 # Building blocks
 #
-targets := libext.a libext4.a libext6.a matches.man targets.man
+targets := libext.a libext4.a libext6.a libext_ebt.a libext_arpt.a matches.man targets.man
 targets_install :=
 @ENABLE_STATIC_TRUE@ libext_objs := ${pfx_objs}
+@ENABLE_STATIC_TRUE@ libext_ebt_objs := ${pfb_objs}
+@ENABLE_STATIC_TRUE@ libext_arpt_objs := ${pfa_objs}
 @ENABLE_STATIC_TRUE@ libext4_objs := ${pf4_objs}
 @ENABLE_STATIC_TRUE@ libext6_objs := ${pf6_objs}
-@ENABLE_STATIC_FALSE@ targets += ${pfx_solibs} ${pf4_solibs} ${pf6_solibs}
-@ENABLE_STATIC_FALSE@ targets_install += ${pfx_solibs} ${pf4_solibs} ${pf6_solibs}
+@ENABLE_STATIC_FALSE@ targets += ${pfx_solibs} ${pfb_solibs} ${pf4_solibs} ${pf6_solibs} ${pfa_solibs}
+@ENABLE_STATIC_FALSE@ targets_install += ${pfx_solibs} ${pfb_solibs} ${pf4_solibs} ${pf6_solibs} ${pfa_solibs}
 
 .SECONDARY:
 
@@ -75,7 +85,7 @@ install: ${targets_install}
 	if test -n "${targets_install}"; then install -pm0755 $^ "${DESTDIR}${xtlibdir}/"; fi;
 
 clean:
-	rm -f *.o *.oo *.so *.a {matches,targets}.man initext.c initext4.c initext6.c;
+	rm -f *.o *.oo *.so *.a {matches,targets}.man initext.c initext4.c initext6.c initextb.c initexta.c;
 	rm -f .*.d .*.dd;
 
 distclean: clean
@@ -93,7 +103,7 @@ lib%.so: lib%.oo
 	${AM_VERBOSE_CCLD} ${CCLD} ${AM_LDFLAGS} -shared ${LDFLAGS} -o $@ $< -L../libxtables/.libs -lxtables ${$*_LIBADD};
 
 lib%.oo: ${srcdir}/lib%.c
-	${AM_VERBOSE_CC} ${CC} ${AM_CPPFLAGS} ${AM_DEPFLAGS} ${AM_CFLAGS} -D_INIT=lib$*_init -DPIC -fPIC ${CFLAGS} ${$*_CFLAGADD} -o $@ -c $<;
+	${AM_VERBOSE_CC} ${CC} ${AM_CPPFLAGS} ${AM_DEPFLAGS} ${AM_CFLAGS} -D_INIT=lib$*_init -DPIC -fPIC ${CFLAGS} -o $@ -c $<;
 
 libxt_NOTRACK.so: libxt_CT.so
 	ln -fs $< $@
@@ -103,9 +113,7 @@ libxt_state.so: libxt_conntrack.so
 # Need the LIBADDs in iptables/Makefile.am too for libxtables_la_LIBADD
 xt_RATEEST_LIBADD   = -lm
 xt_statistic_LIBADD = -lm
-@HAVE_LIBNETFILTER_CONNTRACK_TRUE@xt_connlabel_LIBADD = @libnetfilter_conntrack_LIBS@
-
-@HAVE_LIBNETFILTER_CONNTRACK_TRUE@xt_connlabel_CFLAGADD = @libnetfilter_conntrack_CFLAGS@
+xt_connlabel_LIBADD = @libnetfilter_conntrack_LIBS@
 
 #
 #	Static bits
@@ -120,6 +128,12 @@ lib%.o: ${srcdir}/lib%.c
 libext.a: initext.o ${libext_objs}
 	${AM_VERBOSE_AR} ${AR} crs $@ $^;
 
+libext_ebt.a: initextb.o ${libext_ebt_objs}
+	${AM_VERBOSE_AR} ${AR} crs $@ $^;
+
+libext_arpt.a: initexta.o ${libext_arpt_objs}
+	${AM_VERBOSE_AR} ${AR} crs $@ $^;
+
 libext4.a: initext4.o ${libext4_objs}
 	${AM_VERBOSE_AR} ${AR} crs $@ $^;
 
@@ -127,6 +141,8 @@ libext6.a: initext6.o ${libext6_objs}
 	${AM_VERBOSE_AR} ${AR} crs $@ $^;
 
 initext_func  := $(addprefix xt_,${pfx_build_mod})
+initextb_func := $(addprefix ebt_,${pfb_build_mod})
+initexta_func := $(addprefix arpt_,${pfa_build_mod})
 initext4_func := $(addprefix ipt_,${pf4_build_mod})
 initext6_func := $(addprefix ip6t_,${pf6_build_mod})
 
@@ -135,6 +151,16 @@ initext6_func := $(addprefix ip6t_,${pf6_build_mod})
 	cmp -s $@ $@.tmp || mv $@.tmp $@; \
 	rm -f $@.tmp;
 
+.initextb.dd: FORCE
+	@echo "${initextb_func}" >$@.tmp; \
+	cmp -s $@ $@.tmp || mv $@.tmp $@; \
+	rm -f $@.tmp;
+
+.initexta.dd: FORCE
+	@echo "${initexta_func}" >$@.tmp; \
+	cmp -s $@ $@.tmp || mv $@.tmp $@; \
+	rm -f $@.tmp;
+
 .initext4.dd: FORCE
 	@echo "${initext4_func}" >$@.tmp; \
 	cmp -s $@ $@.tmp || mv $@.tmp $@; \
@@ -161,6 +187,38 @@ initext.c: .initext.dd
 	echo "}" >>$@; \
 	);
 
+initextb.c: .initextb.dd
+	${AM_VERBOSE_GEN}
+	@( \
+	echo "" >$@; \
+	for i in ${initextb_func}; do \
+		echo "extern void lib$${i}_init(void);" >>$@; \
+	done; \
+	echo "void init_extensionsb(void);" >>$@; \
+	echo "void init_extensionsb(void)" >>$@; \
+	echo "{" >>$@; \
+	for i in ${initextb_func}; do \
+		echo  " ""lib$${i}_init();" >>$@; \
+	done; \
+	echo "}" >>$@; \
+	);
+
+initexta.c: .initexta.dd
+	${AM_VERBOSE_GEN}
+	@( \
+	echo "" >$@; \
+	for i in ${initexta_func}; do \
+		echo "extern void lib$${i}_init(void);" >>$@; \
+	done; \
+	echo "void init_extensionsa(void);" >>$@; \
+	echo "void init_extensionsa(void)" >>$@; \
+	echo "{" >>$@; \
+	for i in ${initexta_func}; do \
+		echo  " ""lib$${i}_init();" >>$@; \
+	done; \
+	echo "}" >>$@; \
+	);
+
 initext4.c: .initext4.dd
 	${AM_VERBOSE_GEN}
 	@( \
@@ -221,8 +279,8 @@ man_run    = \
 		fi; \
 	done >$@;
 
-matches.man: .initext.dd .initext4.dd .initext6.dd $(wildcard ${srcdir}/lib*.man)
-	$(call man_run,$(call ex_matches,${pfx_build_mod} ${pf4_build_mod} ${pf6_build_mod} ${pfx_symlinks}))
+matches.man: .initext.dd .initextb.dd .initexta.dd .initext4.dd .initext6.dd $(wildcard ${srcdir}/lib*.man)
+	$(call man_run,$(call ex_matches,${pfx_build_mod} ${pfb_build_mod} ${pfa_build_mod} ${pf4_build_mod} ${pf6_build_mod} ${pfx_symlinks}))
 
-targets.man: .initext.dd .initext4.dd .initext6.dd $(wildcard ${srcdir}/lib*.man)
-	$(call man_run,$(call ex_targets,${pfx_build_mod} ${pf4_build_mod} ${pf6_build_mod} ${pfx_symlinks}))
+targets.man: .initext.dd .initextb.dd .initexta.dd .initext4.dd .initext6.dd $(wildcard ${srcdir}/lib*.man)
+	$(call man_run,$(call ex_targets,${pfx_build_mod} ${pfb_build_mod} ${pfa_build_mod} ${pf4_build_mod} ${pf6_build_mod} ${pfx_symlinks}))

extensions/libarpt_mangle.c

+/*
+ * Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com> adapted
+ * this code to libxtables for arptables-compat in 2015
+ */
+
+#include <stdio.h>
+#include <netdb.h>
+#include <string.h>
+#include <stdlib.h>
+#include <limits.h>
+#include <getopt.h>
+#include <netinet/ether.h>
+#include <xtables.h>
+#include <linux/netfilter_arp/arpt_mangle.h>
+#include "iptables/nft.h"
+#include "iptables/nft-arp.h"
+
+static void arpmangle_print_help(void)
+{
+	printf(
+	"mangle target options:\n"
+	"--mangle-ip-s IP address\n"
+	"--mangle-ip-d IP address\n"
+	"--mangle-mac-s MAC address\n"
+	"--mangle-mac-d MAC address\n"
+	"--mangle-target target (DROP, CONTINUE or ACCEPT -- default is ACCEPT)\n");
+}
+
+#define MANGLE_IPS    '1'
+#define MANGLE_IPT    '2'
+#define MANGLE_DEVS   '3'
+#define MANGLE_DEVT   '4'
+#define MANGLE_TARGET '5'
+
+static struct option arpmangle_opts[] = {
+	{ .name = "mangle-ip-s",	.has_arg = true, .val = MANGLE_IPS },
+	{ .name = "mangle-ip-d",	.has_arg = true, .val = MANGLE_IPT },
+	{ .name = "mangle-mac-s",	.has_arg = true, .val = MANGLE_DEVS },
+	{ .name = "mangle-mac-d",	.has_arg = true, .val = MANGLE_DEVT },
+	{ .name = "mangle-target",	.has_arg = true, .val = MANGLE_TARGET },
+	XT_GETOPT_TABLEEND,
+};
+
+static void arpmangle_init(struct xt_entry_target *target)
+{
+	struct arpt_mangle *mangle = (struct arpt_mangle *)target->data;
+
+	mangle->target = NF_ACCEPT;
+}
+
+static int
+arpmangle_parse(int c, char **argv, int invert, unsigned int *flags,
+		const void *entry, struct xt_entry_target **target)
+{
+	struct arpt_mangle *mangle = (struct arpt_mangle *)(*target)->data;
+	struct in_addr *ipaddr, mask;
+	struct ether_addr *macaddr;
+	const struct arpt_entry *e = (const struct arpt_entry *)entry;
+	unsigned int nr;
+	int ret = 1;
+
+	memset(&mask, 0, sizeof(mask));
+
+	switch (c) {
+	case MANGLE_IPS:
+		xtables_ipparse_any(optarg, &ipaddr, &mask, &nr);
+		mangle->u_s.src_ip.s_addr = ipaddr->s_addr;
+		free(ipaddr);
+		mangle->flags |= ARPT_MANGLE_SIP;
+		break;
+	case MANGLE_IPT:
+		xtables_ipparse_any(optarg, &ipaddr, &mask, &nr);
+		mangle->u_t.tgt_ip.s_addr = ipaddr->s_addr;
+		free(ipaddr);
+		mangle->flags |= ARPT_MANGLE_TIP;
+		break;
+	case MANGLE_DEVS:
+		if (e->arp.arhln_mask == 0)
+			xtables_error(PARAMETER_PROBLEM,
+				      "no --h-length defined");
+		if (e->arp.invflags & ARPT_INV_ARPHLN)
+			xtables_error(PARAMETER_PROBLEM,
+				      "! --h-length not allowed for "
+				      "--mangle-mac-s");
+		if (e->arp.arhln != 6)
+			xtables_error(PARAMETER_PROBLEM,
+				      "only --h-length 6 supported");
+		macaddr = ether_aton(optarg);
+		if (macaddr == NULL)
+			xtables_error(PARAMETER_PROBLEM,
+				      "invalid source MAC");
+		memcpy(mangle->src_devaddr, macaddr, e->arp.arhln);
+		mangle->flags |= ARPT_MANGLE_SDEV;
+		break;
+	case MANGLE_DEVT:
+		if (e->arp.arhln_mask == 0)
+			xtables_error(PARAMETER_PROBLEM,
+				      "no --h-length defined");
+		if (e->arp.invflags & ARPT_INV_ARPHLN)
+			xtables_error(PARAMETER_PROBLEM,
+				      "! hln not allowed for --mangle-mac-d");
+		if (e->arp.arhln != 6)
+			xtables_error(PARAMETER_PROBLEM,
+				      "only --h-length 6 supported");
+		macaddr = ether_aton(optarg);
+		if (macaddr == NULL)
+			xtables_error(PARAMETER_PROBLEM, "invalid target MAC");
+		memcpy(mangle->tgt_devaddr, macaddr, e->arp.arhln);
+		mangle->flags |= ARPT_MANGLE_TDEV;
+		break;
+	case MANGLE_TARGET:
+		if (!strcmp(optarg, "DROP"))
+			mangle->target = NF_DROP;
+		else if (!strcmp(optarg, "ACCEPT"))
+			mangle->target = NF_ACCEPT;
+		else if (!strcmp(optarg, "CONTINUE"))
+			mangle->target = XT_CONTINUE;
+		else
+			xtables_error(PARAMETER_PROBLEM,
+				      "bad target for --mangle-target");
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static void arpmangle_final_check(unsigned int flags)
+{
+}
+
+static void print_mac(const unsigned char *mac, int l)
+{
+	int j;
+
+	for (j = 0; j < l; j++)
+		printf("%02x%s", mac[j],
+			(j==l-1) ? "" : ":");
+}
+
+static void
+arpmangle_print(const void *ip, const struct xt_entry_target *target,
+		int numeric)
+{
+	struct arpt_mangle *m = (struct arpt_mangle *)(target->data);
+	char buf[100];
+
+	if (m->flags & ARPT_MANGLE_SIP) {
+		if (numeric)
+			sprintf(buf, "%s",
+				xtables_ipaddr_to_numeric(&(m->u_s.src_ip)));
+		else
+			sprintf(buf, "%s",
+				xtables_ipaddr_to_anyname(&(m->u_s.src_ip)));
+		printf("--mangle-ip-s %s ", buf);
+	}
+	if (m->flags & ARPT_MANGLE_SDEV) {
+		printf("--mangle-mac-s ");
+		print_mac((unsigned char *)m->src_devaddr, 6);
+		printf(" ");
+	}
+	if (m->flags & ARPT_MANGLE_TIP) {
+		if (numeric)
+			sprintf(buf, "%s",
+				xtables_ipaddr_to_numeric(&(m->u_t.tgt_ip)));
+		else
+			sprintf(buf, "%s",
+				xtables_ipaddr_to_anyname(&(m->u_t.tgt_ip)));
+		printf("--mangle-ip-d %s ", buf);
+	}
+	if (m->flags & ARPT_MANGLE_TDEV) {
+		printf("--mangle-mac-d ");
+		print_mac((unsigned char *)m->tgt_devaddr, 6);
+		printf(" ");
+	}
+	if (m->target != NF_ACCEPT) {
+		printf("--mangle-target ");
+		if (m->target == NF_DROP)
+			printf("DROP ");
+		else
+			printf("CONTINUE ");
+	}
+}
+
+static struct xtables_target arpmangle_target = {
+	.name		= "mangle",
+	.revision	= 0,
+	.version	= XTABLES_VERSION,
+	.family		= NFPROTO_ARP,
+	.size		= XT_ALIGN(sizeof(struct arpt_mangle)),
+	.userspacesize	= XT_ALIGN(sizeof(struct arpt_mangle)),
+	.help		= arpmangle_print_help,
+	.init		= arpmangle_init,
+	.parse		= arpmangle_parse,
+	.final_check	= arpmangle_final_check,
+	.print		= arpmangle_print,
+	.extra_opts	= arpmangle_opts,
+};
+
+void _init(void)
+{
+	xtables_register_target(&arpmangle_target);
+}

extensions/libebt_802_3.c

+/* 802_3
+ *
+ * Author:
+ * Chris Vitale <csv@bluetail.com>
+ *
+ * May 2003
+ *
+ * Adapted by Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
+ * to use libxtables for ebtables-compat
+ */
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <getopt.h>
+#include <xtables.h>
+#include <linux/netfilter_bridge/ebt_802_3.h>
+
+#define _802_3_SAP	'1'
+#define _802_3_TYPE	'2'
+
+static const struct option br802_3_opts[] = {
+	{ .name = "802_3-sap",	.has_arg = true, .val = _802_3_SAP },
+	{ .name = "802_3-type",	.has_arg = true, .val = _802_3_TYPE },
+	XT_GETOPT_TABLEEND,
+};
+
+static void br802_3_print_help(void)
+{
+	printf(
+"802_3 options:\n"
+"--802_3-sap [!] protocol       : 802.3 DSAP/SSAP- 1 byte value (hex)\n"
+"  DSAP and SSAP are always the same.  One SAP applies to both fields\n"
+"--802_3-type [!] protocol      : 802.3 SNAP Type- 2 byte value (hex)\n"
+"  Type implies SAP value 0xaa\n");
+}
+
+static void br802_3_init(struct xt_entry_match *match)
+{
+	struct ebt_802_3_info *info = (struct ebt_802_3_info *)match->data;
+
+	info->invflags = 0;
+	info->bitmask = 0;
+}
+
+static int
+br802_3_parse(int c, char **argv, int invert, unsigned int *flags,
+	      const void *entry, struct xt_entry_match **match)
+{
+	struct ebt_802_3_info *info = (struct ebt_802_3_info *) (*match)->data;
+	unsigned int i;
+	char *end;
+
+	switch (c) {
+	case _802_3_SAP:
+		if (invert)
+			info->invflags |= EBT_802_3_SAP;
+		i = strtoul(optarg, &end, 16);
+		if (i > 255 || *end != '\0')
+			xtables_error(PARAMETER_PROBLEM,
+				      "Problem with specified "
+					"sap hex value, %x",i);
+		info->sap = i; /* one byte, so no byte order worries */
+		info->bitmask |= EBT_802_3_SAP;
+		break;
+	case _802_3_TYPE:
+		if (invert)
+			info->invflags |= EBT_802_3_TYPE;
+		i = strtoul(optarg, &end, 16);
+		if (i > 65535 || *end != '\0') {
+			xtables_error(PARAMETER_PROBLEM,
+				      "Problem with the specified "
+					"type hex value, %x",i);
+		}
+		info->type = htons(i);
+		info->bitmask |= EBT_802_3_TYPE;
+		break;
+	default:
+		return 0;
+	}
+
+	*flags |= info->bitmask;
+	return 1;
+}
+
+static void
+br802_3_final_check(unsigned int flags)
+{
+	if (!flags)
+		xtables_error(PARAMETER_PROBLEM,
+			      "You must specify proper arguments");
+}
+
+static void br802_3_print(const void *ip, const struct xt_entry_match *match,
+			  int numeric)
+{
+	struct ebt_802_3_info *info = (struct ebt_802_3_info *)match->data;
+
+	if (info->bitmask & EBT_802_3_SAP) {
+		printf("--802_3-sap ");
+		if (info->invflags & EBT_802_3_SAP)
+			printf("! ");
+		printf("0x%.2x ", info->sap);
+	}
+	if (info->bitmask & EBT_802_3_TYPE) {
+		printf("--802_3-type ");
+		if (info->invflags & EBT_802_3_TYPE)
+			printf("! ");
+		printf("0x%.4x ", ntohs(info->type));
+	}
+}
+
+static struct xtables_match br802_3_match =
+{
+	.name		= "802_3",
+	.revision	= 0,
+	.version	= XTABLES_VERSION,
+	.family		= NFPROTO_BRIDGE,
+	.size		= XT_ALIGN(sizeof(struct ebt_802_3_info)),
+	.userspacesize	= XT_ALIGN(sizeof(struct ebt_802_3_info)),
+	.init		= br802_3_init,
+	.help		= br802_3_print_help,
+	.parse		= br802_3_parse,
+	.final_check	= br802_3_final_check,
+	.print		= br802_3_print,
+	.extra_opts	= br802_3_opts,
+};
+
+void _init(void)
+{
+	xtables_register_match(&br802_3_match);
+}