Merge pull request #44 from ssvb/20160512-uart0-helloworld

Add new uart0-helloworld-sdboot.sunxi bootable test image

Makefile

@@ -45,7 +45,7 @@ MISC_TOOLS = phoenix_info sunxi-nand-image-builder
 
 # ARM binaries and images
 # Note: To use this target, set/adjust CROSS_COMPILE and MKSUNXIBOOT if needed
-BINFILES = fel-pio.bin jtag-loop.sunxi fel-sdboot.sunxi
+BINFILES = fel-pio.bin jtag-loop.sunxi fel-sdboot.sunxi uart0-helloworld-sdboot.sunxi
 
 CROSS_COMPILE ?= arm-none-eabi-
 MKSUNXIBOOT ?= mksunxiboot
@@ -122,7 +122,7 @@ sunxi-%: %.c
 fel-pio.bin: fel-pio.elf fel-pio.nm
 
 ARM_ELF_FLAGS = -Os -marm -fpic -Wall
-ARM_ELF_FLAGS += -fno-common -fno-builtin -ffreestanding -nostdinc
+ARM_ELF_FLAGS += -fno-common -fno-builtin -ffreestanding -nostdinc -fno-strict-aliasing
 ARM_ELF_FLAGS += -mno-thumb-interwork -fno-stack-protector -fno-toplevel-reorder
 ARM_ELF_FLAGS += -Wstrict-prototypes -Wno-format-nonliteral -Wno-format-security
 
@@ -138,6 +138,9 @@ jtag-loop.elf: jtag-loop.c jtag-loop.lds
 fel-sdboot.elf: fel-sdboot.S fel-sdboot.lds
 	$(CROSS_COMPILE)gcc  -g  $(ARM_ELF_FLAGS)  $< -nostdlib -o $@ -T fel-sdboot.lds -Wl,-N
 
+uart0-helloworld-sdboot.elf: uart0-helloworld-sdboot.c uart0-helloworld-sdboot.lds
+	$(CROSS_COMPILE)gcc  -g  $(ARM_ELF_FLAGS)  $< -nostdlib -o $@ -T uart0-helloworld-sdboot.lds -Wl,-N
+
 boot_head_sun3i.elf: boot_head.S boot_head.lds
 	$(CROSS_COMPILE)gcc  -g  $(ARM_ELF_FLAGS)  $< -nostdlib -o $@ -T boot_head.lds -Wl,-N -DMACHID=0x1094
 

README.md

@@ -37,6 +37,14 @@ to allow GPIO manipulations via FEL
 ### fel-sdboot
 ARM native sdcard bootloader forcing the device into FEL mode
 
+### uart0-helloworld-sdboot
+ARM native sdcard bootloader, which is only printing a short "hello"
+message to the UART0 serial console. Because it relies on runtime
+SoC type detection, this single image is bootable on a wide range of
+Allwinner devices and can be used for testing. Additionally, it may
+serve as a template/example for developing simple bare metal code
+(LED blinking and other similar GPIO related things).
+
 ### fel-pio
 ARM native helper (binary) for `fel-gpio`
 

uart0-helloworld-sdboot.c

+/*
+ * Copyright (C) 2016  Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Partially based on the uart code from ar100-info
+ *
+ * (C) Copyright 2013 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Partially based on the sunxi gpio code from U-Boot
+ *
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * Based on earlier arch/arm/cpu/armv7/sunxi/gpio.c:
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+typedef unsigned int u32;
+
+#define set_wbit(addr, v)	(*((volatile unsigned long  *)(addr)) |= (unsigned long)(v))
+#define readl(addr)		(*((volatile unsigned long  *)(addr)))
+#define writel(v, addr)		(*((volatile unsigned long  *)(addr)) = (unsigned long)(v))
+
+#define SUNXI_UART0_BASE	0x01C28000
+#define SUNXI_PIO_BASE		0x01C20800
+#define AW_CCM_BASE		0x01c20000
+#define AW_SRAMCTRL_BASE	0x01c00000
+
+/*****************************************************************************
+ * GPIO code, borrowed from U-Boot                                           *
+ *****************************************************************************/
+
+#define SUNXI_GPIO_A    0
+#define SUNXI_GPIO_B    1
+#define SUNXI_GPIO_C    2
+#define SUNXI_GPIO_D    3
+#define SUNXI_GPIO_E    4
+#define SUNXI_GPIO_F    5
+#define SUNXI_GPIO_G    6
+#define SUNXI_GPIO_H    7
+#define SUNXI_GPIO_I    8
+
+struct sunxi_gpio {
+	u32 cfg[4];
+	u32 dat;
+	u32 drv[2];
+	u32 pull[2];
+};
+
+struct sunxi_gpio_reg {
+	struct sunxi_gpio gpio_bank[10];
+};
+
+#define GPIO_BANK(pin)		((pin) >> 5)
+#define GPIO_NUM(pin)		((pin) & 0x1F)
+
+#define GPIO_CFG_INDEX(pin)	(((pin) & 0x1F) >> 3)
+#define GPIO_CFG_OFFSET(pin)	((((pin) & 0x1F) & 0x7) << 2)
+
+#define GPIO_PULL_INDEX(pin)	(((pin) & 0x1f) >> 4)
+#define GPIO_PULL_OFFSET(pin)	((((pin) & 0x1f) & 0xf) << 1)
+
+/* GPIO bank sizes */
+#define SUNXI_GPIO_A_NR    (32)
+#define SUNXI_GPIO_B_NR    (32)
+#define SUNXI_GPIO_C_NR    (32)
+#define SUNXI_GPIO_D_NR    (32)
+#define SUNXI_GPIO_E_NR    (32)
+#define SUNXI_GPIO_F_NR    (32)
+#define SUNXI_GPIO_G_NR    (32)
+#define SUNXI_GPIO_H_NR    (32)
+#define SUNXI_GPIO_I_NR    (32)
+
+#define SUNXI_GPIO_NEXT(__gpio) ((__gpio##_START) + (__gpio##_NR) + 0)
+
+enum sunxi_gpio_number {
+	SUNXI_GPIO_A_START = 0,
+	SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A),
+	SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B),
+	SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C),
+	SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D),
+	SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E),
+	SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
+	SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
+	SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
+};
+
+/* SUNXI GPIO number definitions */
+#define SUNXI_GPA(_nr)          (SUNXI_GPIO_A_START + (_nr))
+#define SUNXI_GPB(_nr)          (SUNXI_GPIO_B_START + (_nr))
+#define SUNXI_GPC(_nr)          (SUNXI_GPIO_C_START + (_nr))
+#define SUNXI_GPD(_nr)          (SUNXI_GPIO_D_START + (_nr))
+#define SUNXI_GPE(_nr)          (SUNXI_GPIO_E_START + (_nr))
+#define SUNXI_GPF(_nr)          (SUNXI_GPIO_F_START + (_nr))
+#define SUNXI_GPG(_nr)          (SUNXI_GPIO_G_START + (_nr))
+#define SUNXI_GPH(_nr)          (SUNXI_GPIO_H_START + (_nr))
+#define SUNXI_GPI(_nr)          (SUNXI_GPIO_I_START + (_nr))
+
+/* GPIO pin function config */
+#define SUNXI_GPIO_INPUT        (0)
+#define SUNXI_GPIO_OUTPUT       (1)
+#define SUN4I_GPB_UART0         (2)
+#define SUN5I_GPB_UART0         (2)
+#define SUN6I_GPH_UART0         (2)
+#define SUN8I_H3_GPA_UART0      (2)
+#define SUN50I_A64_GPB_UART0    (4)
+#define SUNXI_GPF_UART0         (4)
+
+/* GPIO pin pull-up/down config */
+#define SUNXI_GPIO_PULL_DISABLE (0)
+#define SUNXI_GPIO_PULL_UP      (1)
+#define SUNXI_GPIO_PULL_DOWN    (2)
+
+int sunxi_gpio_set_cfgpin(u32 pin, u32 val)
+{
+	u32 cfg;
+	u32 bank = GPIO_BANK(pin);
+	u32 index = GPIO_CFG_INDEX(pin);
+	u32 offset = GPIO_CFG_OFFSET(pin);
+	struct sunxi_gpio *pio =
+		&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank];
+	cfg = readl(&pio->cfg[0] + index);
+	cfg &= ~(0xf << offset);
+	cfg |= val << offset;
+	writel(cfg, &pio->cfg[0] + index);
+	return 0;
+}
+
+int sunxi_gpio_set_pull(u32 pin, u32 val)
+{
+	u32 cfg;
+	u32 bank = GPIO_BANK(pin);
+	u32 index = GPIO_PULL_INDEX(pin);
+	u32 offset = GPIO_PULL_OFFSET(pin);
+	struct sunxi_gpio *pio =
+		&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank];
+	cfg = readl(&pio->pull[0] + index);
+	cfg &= ~(0x3 << offset);
+	cfg |= val << offset;
+	writel(cfg, &pio->pull[0] + index);
+	return 0;
+}
+
+int sunxi_gpio_output(u32 pin, u32 val)
+{
+	u32 dat;
+	u32 bank = GPIO_BANK(pin);
+	u32 num = GPIO_NUM(pin);
+	struct sunxi_gpio *pio =
+		&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank];
+	dat = readl(&pio->dat);
+	if(val)
+		dat |= 1 << num;
+	else
+		dat &= ~(1 << num);
+	writel(dat, &pio->dat);
+	return 0;
+}
+
+int sunxi_gpio_input(u32 pin)
+{
+	u32 dat;
+	u32 bank = GPIO_BANK(pin);
+	u32 num = GPIO_NUM(pin);
+	struct sunxi_gpio *pio =
+		&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank];
+	dat = readl(&pio->dat);
+	dat >>= num;
+	return (dat & 0x1);
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+	sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_INPUT);
+	return sunxi_gpio_input(gpio);
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_OUTPUT);
+	return sunxi_gpio_output(gpio, value);
+}
+
+/*****************************************************************************
+ * Nearly all the Allwinner SoCs are using the same VER_REG register for     *
+ * runtime SoC type identification. For additional details see:              *
+ *                                                                           *
+ *    https://linux-sunxi.org/SRAM_Controller_Register_Guide                 *
+ *                                                                           *
+ * Allwinner A80 is an oddball and has a non-standard address of the VER_REG *
+ *                                                                           *
+ * Allwinner A10s and A13 are using the same SoC type id, but they can be    *
+ * differentiated using a certain part of the SID register.                  *
+ *****************************************************************************/
+
+#define VER_REG			(AW_SRAMCTRL_BASE + 0x24)
+#define SUN4I_SID_BASE		0x01C23800
+
+static u32 soc_id;
+
+void soc_detection_init(void)
+{
+	u32 midr;
+	asm volatile("mrc p15, 0, %0, c0, c0, 0" : "=r" (midr));
+
+	if (((midr >> 4) & 0xFFF) == 0xC0F) {
+		soc_id = 0x1639; /* ARM Cortex-A15, so likely Allwinner A80 */
+	} else {
+		set_wbit(VER_REG, 1 << 15);
+		soc_id = readl(VER_REG) >> 16;
+	}
+}
+
+int soc_is_a10(void)
+{
+	return soc_id == 0x1623;
+}
+
+int soc_is_a10s(void)
+{
+	return (soc_id == 0x1625) &&
+	       (((readl(SUN4I_SID_BASE + 0x08) >> 12) & 0xf) == 7);
+}
+
+int soc_is_a13(void)
+{
+	return (soc_id == 0x1625) &&
+	       !(((readl(SUN4I_SID_BASE + 0x08) >> 12) & 0xf) == 7);
+}
+
+int soc_is_a20(void)
+{
+	return soc_id == 0x1651;
+}
+
+int soc_is_a31(void)
+{
+	return soc_id == 0x1633;
+}
+
+int soc_is_a80(void)
+{
+	return soc_id == 0x1639;
+}
+
+int soc_is_a64(void)
+{
+	return soc_id == 0x1689;
+}
+
+int soc_is_h3(void)
+{
+	return soc_id == 0x1680;
+}
+
+/*****************************************************************************
+ * UART is mostly the same on A10/A13/A20/A31/H3/A64, except that newer SoCs *
+ * have changed the APB numbering scheme (A10/A13/A20 used to have APB0 and  *
+ * APB1 names, but newer SoCs just have renamed them into APB1 and APB2).    *
+ * The constants below are using the new APB numbering convention.           *
+ * Also the newer SoCs have introduced the APB2_RESET register, but writing  *
+ * to it effectively goes nowhere on older SoCs and is harmless.             *
+ *****************************************************************************/
+
+#define CONFIG_CONS_INDEX	1
+#define APB2_CFG		(AW_CCM_BASE + 0x058)
+#define APB2_GATE		(AW_CCM_BASE + 0x06C)
+#define APB2_RESET		(AW_CCM_BASE + 0x2D8)
+#define APB2_GATE_UART_SHIFT	(16)
+#define APB2_RESET_UART_SHIFT	(16)
+
+void clock_init_uart(void)
+{
+	/* Open the clock gate for UART0 */
+	set_wbit(APB2_GATE, 1 << (APB2_GATE_UART_SHIFT + CONFIG_CONS_INDEX - 1));
+	/* Deassert UART0 reset (only needed on A31/A64/H3) */
+	set_wbit(APB2_RESET, 1 << (APB2_RESET_UART_SHIFT + CONFIG_CONS_INDEX - 1));
+}
+
+/*****************************************************************************
+ * UART0 pins muxing is different for different SoC variants.                *
+ * Allwinner A13 is a bit special, because there are no dedicated UART0 pins *
+ * and they are shared with MMC0.                                            *
+ *****************************************************************************/
+
+void gpio_init(void)
+{
+	if (soc_is_a10() || soc_is_a20()) {
+		sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
+		sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
+		sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
+	} else if (soc_is_a10s()) {
+		sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB_UART0);
+		sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB_UART0);
+		sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
+	} else if (soc_is_a13()) {
+		/* Disable PB19/PB20 as UART0 to avoid conflict */
+		gpio_direction_input(SUNXI_GPB(19));
+		gpio_direction_input(SUNXI_GPB(20));
+		/* Use SD breakout board to access UART0 on MMC0 pins */
+		sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0);
+		sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
+		sunxi_gpio_set_pull(SUNXI_GPF(4), SUNXI_GPIO_PULL_UP);
+	} else if (soc_is_a31()) {
+		sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0);
+		sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0);
+		sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
+	} else if (soc_is_a64()) {
+		sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_A64_GPB_UART0);
+		sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_A64_GPB_UART0);
+		sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
+	} else if (soc_is_h3()) {
+		sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
+		sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
+		sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
+	} else {
+		/* Unknown SoC */
+		while (1) {}
+	}
+}
+
+/*****************************************************************************/
+
+#define UART0_RBR (SUNXI_UART0_BASE + 0x0)    /* receive buffer register */
+#define UART0_THR (SUNXI_UART0_BASE + 0x0)    /* transmit holding register */
+#define UART0_DLL (SUNXI_UART0_BASE + 0x0)    /* divisor latch low register */
+
+#define UART0_DLH (SUNXI_UART0_BASE + 0x4)    /* divisor latch high register */
+#define UART0_IER (SUNXI_UART0_BASE + 0x4)    /* interrupt enable reigster */
+
+#define UART0_IIR (SUNXI_UART0_BASE + 0x8)    /* interrupt identity register */
+#define UART0_FCR (SUNXI_UART0_BASE + 0x8)    /* fifo control register */
+
+#define UART0_LCR (SUNXI_UART0_BASE + 0xc)    /* line control register */
+
+#define UART0_LSR (SUNXI_UART0_BASE + 0x14)   /* line status register */
+
+#define BAUD_115200    (0xD) /* 24 * 1000 * 1000 / 16 / 115200 = 13 */
+#define NO_PARITY      (0)
+#define ONE_STOP_BIT   (0)
+#define DAT_LEN_8_BITS (3)
+#define LC_8_N_1       (NO_PARITY << 3 | ONE_STOP_BIT << 2 | DAT_LEN_8_BITS)
+
+void uart0_init(void)
+{
+	clock_init_uart();
+
+	/* select dll dlh */
+	writel(0x80, UART0_LCR);
+	/* set baudrate */
+	writel(0, UART0_DLH);
+	writel(BAUD_115200, UART0_DLL);
+	/* set line control */
+	writel(LC_8_N_1, UART0_LCR);
+}
+
+void uart0_putc(char c)
+{
+	while (!(readl(UART0_LSR) & (1 << 6))) {}
+	writel(c, UART0_THR);
+}
+
+void uart0_puts(const char *s)
+{
+	while (*s) {
+		if (*s == '\n')
+			uart0_putc('\r');
+		uart0_putc(*s++);
+	}
+}
+
+/*****************************************************************************/
+
+/* A workaround for https://patchwork.ozlabs.org/patch/622173 */
+void __attribute__((section(".start"))) __attribute__((naked)) start(void)
+{
+	asm volatile("b     main             \n"
+		     ".long 0xffffffff       \n"
+		     ".long 0xffffffff       \n"
+		     ".long 0xffffffff       \n");
+}
+
+enum { BOOT_DEVICE_UNK, BOOT_DEVICE_FEL, BOOT_DEVICE_MMC0, BOOT_DEVICE_SPI };
+
+int get_boot_device(void)
+{
+	u32 *spl_signature = (void *)0x4;
+	if (soc_is_a64() || soc_is_a80())
+		spl_signature = (void *)0x10004;
+
+	/* Check the eGON.BT0 magic in the SPL header */
+	if (spl_signature[0] != 0x4E4F4765 || spl_signature[1] != 0x3054422E)
+		return BOOT_DEVICE_FEL;
+
+	u32 boot_dev = spl_signature[9] & 0xFF; /* offset into SPL = 0x28 */
+	if (boot_dev == 0)
+		return BOOT_DEVICE_MMC0;
+	if (boot_dev == 3)
+		return BOOT_DEVICE_SPI;
+
+	return BOOT_DEVICE_UNK;
+}
+
+int main(void)
+{
+	soc_detection_init();
+	gpio_init();
+	uart0_init();
+
+	uart0_puts("\nHello from ");
+	if (soc_is_a10())
+		uart0_puts("Allwinner A10!\n");
+	else if (soc_is_a10s())
+		uart0_puts("Allwinner A10s!\n");
+	else if (soc_is_a13())
+		uart0_puts("Allwinner A13!\n");
+	else if (soc_is_a20())
+		uart0_puts("Allwinner A20!\n");
+	else if (soc_is_a31())
+		uart0_puts("Allwinner A31/A31s!\n");
+	else if (soc_is_a64())
+		uart0_puts("Allwinner A64!\n");
+	else if (soc_is_h3())
+		uart0_puts("Allwinner H3!\n");
+	else
+		uart0_puts("unknown Allwinner SoC!\n");
+
+	switch (get_boot_device()) {
+	case BOOT_DEVICE_FEL:
+		uart0_puts("Returning back to FEL.\n");
+		return 0;
+	case BOOT_DEVICE_MMC0:
+		uart0_puts("Booted from MMC0, entering an infinite loop.\n");
+		while (1) {}
+	case BOOT_DEVICE_SPI:
+		uart0_puts("Booted from SPI0, entering an infinite loop.\n");
+		while (1) {}
+	default:
+		uart0_puts("Booted from unknown media, entering an infinite loop.\n");
+		while (1) {}
+	};
+
+	return 0;
+}

uart0-helloworld-sdboot.lds

+/*
+ * Copyright (C) 2016  Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+SECTIONS
+{
+	. = 0x0000;
+	.start    : { *(.start) }
+	.text     : { *(.text) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.note*) }
+}