/* * Copyright © 2015 Siarhei Siamashka * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. */ /*************************************************************************/ /* Usage instructions: "ruby -x fel-to-spl-thunk.S > fel-to-spl-thunk.h" */ /*************************************************************************/ /* Open a comment for gas. Do not close the comment until after the Ruby code terminator (__END__). Write the '*' '/' sequence of characters as "\x2a/" in string literals to avoid doing so. #!/usr/bin/env ruby def tool_exists(tool_name) `which #{tool_name} > /dev/null 2>&1` return $?.to_i == 0 end toolchains = [ "arm-none-eabi-", "arm-linux-gnueabihf-", "arm-none-linux-gnueabi-", "armv7a-hardfloat-linux-gnueabi-", ] toolchain = toolchains.find { |toolchain| tool_exists("#{toolchain}as") } abort "Can't find any ARM crosscompiler\n" unless toolchain system("#{toolchain}as -o #{$PROGRAM_NAME}.o #{$PROGRAM_NAME}") exit($?.to_i) if $?.to_i != 0 `#{toolchain}objdump -d #{$PROGRAM_NAME}.o`.each_line {|l| next unless l =~ /(\h+)\:\s+(\h+)\s+(\S+)\s+([^;]*)/ printf("\t0x%s, /* %8s: %-10s %-28s \x2a/\n", $2, $1, $3, $4.strip) } __END__ */ /*************************************************************************/ BUF1 .req r0 BUF2 .req r1 TMP1 .req r2 TMP2 .req r3 SWAPTBL .req r4 FULLSIZE .req r5 BUFSIZE .req r6 CHECKSUM .req r7 entry_point: b setup_stack stack_begin: nop nop nop nop nop nop nop nop stack_end: nop /* A function, which walks the table and swaps all buffers */ swap_all_buffers: adr SWAPTBL, swaptbl_start swap_next_buffer: ldr BUF1, [SWAPTBL], #4 ldr BUF2, [SWAPTBL], #4 ldr BUFSIZE, [SWAPTBL], #4 cmp BUFSIZE, #0 bxeq lr swap_next_word: ldr TMP1, [BUF1] ldr TMP2, [BUF2] subs BUFSIZE, BUFSIZE, #4 str TMP1, [BUF2], #4 str TMP2, [BUF1], #4 bne swap_next_word b swap_next_buffer setup_stack: /* Save the original SP, LR and CPSR to stack */ adr BUF1, stack_end str sp, [BUF1, #-4]! mov sp, BUF1 mrs TMP1, cpsr push {TMP1, lr} /* Disable IRQ and FIQ */ orr TMP1, #0xc0 msr cpsr_c, TMP1 /* Check if the instructions or data cache is enabled */ mrc p15, 0, TMP1, c1, c0, 0 movw TMP2, #((1 << 12) | (1 << 2)) tst TMP1, TMP2 bne cache_is_unsupported bl swap_all_buffers verify_checksum: movw CHECKSUM, #0x6c39 movt CHECKSUM, #0x5f0a mov BUF1, #0 ldr FULLSIZE, [BUF1, #16] check_next_word: ldr TMP1, [BUF1], #4 subs FULLSIZE, FULLSIZE, #4 add CHECKSUM, CHECKSUM, TMP1 bne check_next_word mov BUF1, #0 ldr TMP1, [BUF1, #12] subs CHECKSUM, CHECKSUM, TMP1, lsl #1 bne checksum_is_bad /* Change 'eGON.BT0' -> 'eGON.FEL' */ mov BUF1, #0 movw TMP1, (('F' << 8) + '.') movt TMP1, (('L' << 8) + 'E') str TMP1, [BUF1, #8] /* Call the SPL code */ dsb isb blx BUF1 /* Return back to FEL */ b return_to_fel cache_is_unsupported: /* Bail out if cache is enabled and change 'eGON.BT0' -> 'eGON.???' */ mov BUF1, #0 movw TMP1, (('?' << 8) + '.') movt TMP1, (('?' << 8) + '?') str TMP1, [BUF1, #8] b return_to_fel checksum_is_bad: /* The checksum test failed, so change 'eGON.BT0' -> 'eGON.BAD' */ mov BUF1, #0 movw TMP1, (('B' << 8) + '.') movt TMP1, (('D' << 8) + 'A') str TMP1, [BUF1, #8] return_to_fel: bl swap_all_buffers pop {TMP1, lr} msr cpsr_c, TMP1 /* Restore the original CPSR */ ldr sp, [sp] bx lr swaptbl_start: