GitLab

对称参照 Claude BetaPolicy 的 fast-mode 过滤实现，新增针对 OpenAI 上游
service_tier 字段（priority / flex，含客户端 "fast" → "priority" 归一化）的
pass / filter / block 三态策略，覆盖全部 OpenAI 入口 + admin 配置入口。

后端核心
- 新增 SettingKeyOpenAIFastPolicySettings、OpenAIFastPolicyRule、
  OpenAIFastPolicySettings 配置模型，含规则的 service_tier × action × scope
  × 模型白名单 × fallback action 维度。
- SettingService.Get/SetOpenAIFastPolicySettings；缺失时返回内置默认策略
  （所有模型的 priority 走 filter，whitelist 为空，fallback=pass）。设计
  依据：service_tier=fast 是用户级开关，与 model 字段正交，默认锁定特定
  model slug 会留下"用 gpt-4 + fast 透传 priority 上游"的绕过路径。JSON
  解析失败不再静默 fallback，slog.Warn 记录脏数据，便于运维定位。
- service_tier 归一化（trim + ToLower + fast→priority + 白名单 priority/flex）
  与策略评估（evaluateOpenAIFastPolicy）作为唯一真实来源，HTTP / WS 共用。
  抽出纯函数 evaluateOpenAIFastPolicyWithSettings，配合 ctx-bound settings
  快照（withOpenAIFastPolicyContext / openAIFastPolicySettingsFromContext），
  WS 长会话入口预取一次后所有帧复用，避免每帧打到 settingService。

HTTP 入口（4 个）
- Chat Completions、Anthropic 兼容（Messages，含 BetaFastMode→priority 二次
  命中）、原生 Responses、Passthrough Responses 全部接入
  applyOpenAIFastPolicyToBody，filter 走 sjson 顶层删除 service_tier，block
  返回 403 forbidden_error JSON。
- 4 入口统一使用 upstream 视角的 model（GetMappedModel +
  normalizeOpenAIModelForUpstream + Codex OAuth normalize 后的 slug），
  避免 chat/messages/native /responses/passthrough 因为 model 维度不同
  造成 whitelist 命中差异。
- 在 pass 路径也把客户端 "fast" 别名归一化为 "priority" 写回 body，
  否则 native /responses 与 passthrough 入口会把 "fast" 原样透传给上游
  导致 400/拒绝（chat-completions 入口的 normalizeResponsesBodyServiceTier
  此前已具备同等行为）。

WebSocket 入口
- 新增 applyOpenAIFastPolicyToWSResponseCreate：严格匹配
  type="response.create"，仅处理顶层 service_tier；filter 用 sjson 删字段，
  block 返回 typed *OpenAIFastBlockedError。
- ingress 路径在 parseClientPayload 内调用，block 命中先 Write Realtime
  风格 error event 再返回 OpenAIWSClientCloseError(StatusPolicyViolation
  =1008)，依赖底层 WebSocket Conn.Write 的同步 flush 保证 error 先于
  close。
- passthrough 路径在 RunEntry 前对 firstClientMessage 应用策略，并通过
  openAIWSPolicyEnforcingFrameConn 包装 ReadFrame 对每个 client→upstream
  帧执行策略；后续帧无 model 字段时回退到 capturedSessionModel。
  filter 闭包内同时侦测 session.update / session.created 帧的 session.model
  字段刷新 capturedSessionModel，封堵"首帧 model=gpt-4o（pass）→
  session.update 改为 gpt-5.5 → 不带 model 的 response.create fallback
  到 gpt-4o"的 mid-session 绕过路径。
- passthrough billing：requestServiceTier 在策略 filter 之后再从
  firstClientMessage 提取，filter 命中时 OpenAIForwardResult.ServiceTier
  上报 nil（default tier），与 HTTP 入口（reqBody 来自 post-filter map）
  / WS ingress（payload 来自 post-filter bytes）的语义一致。
- 错误事件 schema：{event_id: "evt_<32hex>", type: "error",
  error: {type: "forbidden_error", code: "policy_violation", message}}，
  与 OpenAI codex 客户端 error event 解析兼容。

Admin / Frontend
- dto.SystemSettings / UpdateSettingsRequest 新增
  openai_fast_policy_settings 字段（omitempty），bulk GET/PUT 接入。
- Settings 页 Gateway 页签新增 Fast/Flex Policy 表单卡片：
  service_tier × action × scope × 模型白名单 × fallback action 全字段配置。
- 前端守门：openaiFastPolicyLoaded 标志仅在 GET 真带回字段时才允许回写，
  避免 rollout/错误把默认规则覆盖成空；saveSettings 回写循环 skip 该字段，
  由专用刷新逻辑处理；仅 action=block 时发送 error_message，匹配后端
  omitempty 行为。

测试
- HTTP 路径：openai_fast_policy_test.go 覆盖默认配置（whitelist=[]，所有
  模型 priority filter）/ block 自定义错误 / scope 区分 / filter 删字段 /
  block 不改 body / block 短路上游 / Anthropic BetaFastMode 触发 OpenAI
  fast policy 等场景。
- WebSocket 路径：openai_fast_policy_ws_test.go 覆盖
    helper 单元（filter / fast→priority 归一化 / flex 透传 / block typed
    error / 无 service_tier 字节不变 / 非 response.create 帧不动 / 空 type
    帧不动 / event_id+code 字段断言 / 非字符串 service_tier 容错）+
    pass 路径 fast 别名归一化回归 +
    ingress 端到端（filter 后上游不含 service_tier / block 后客户端先收
    error event 再收 close 1008 且上游 0 写）+
    passthrough capturedSessionModel fallback 用例（whitelist 策略下首帧
    建立、缺 model 命中 fallback、缺少 fallback 时的 leak 文档化）+
    passthrough session.update / session.created 旋转 capturedSessionModel
    的 mid-session 绕过回归 +
    passthrough billing post-filter ServiceTier 与 idempotent filter 回归。
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

shaw authored Apr 26, 2026 and 陈曦 committed Apr 27, 2026

  - 修复返利不到账的根因：tryClaimAffiliateRebateAudit 中 PostgreSQL 参数类型推断冲突
  - 补全 OAuth 注册路径（LinuxDo/OIDC/WeChat/Pending Flow）的邀请码绑定
  - 前端 OAuth 注册页面传递 aff_code 参数
  - 新增返利冻结期机制：可配置冻结时间，到期后自动解冻（懒解冻）
  - 新增返利有效期：绑定后 N 天内有效，过期不再产生返利
  - 新增单人返利上限：超出上限部分精确截断
  - 增强返利流程 slog 结构化日志，便于排查问题
  - 已邀请用户列表增加返利明细列

shaw authored Apr 25, 2026 and 陈曦 committed Apr 27, 2026

- 在系统设置「功能开关」中新增邀请返利总开关，默认关闭；
  关闭态：菜单隐藏、注册忽略 aff、新充值不返利，但已有 quota 仍可转余额
- 支持管理员为指定用户设置专属邀请码（覆盖随机码，全局唯一）
- 支持管理员为指定用户设置专属返利比例（覆盖全局比例，可单条/批量调整）
- 在系统设置邀请返利卡片内嵌入专属用户管理表格（搜索/编辑/批量/删除），
  删除采用项目通用 ConfirmDialog，会同时清除专属比例并把邀请码重置为系统随机码
- /affiliate 用户页新增「我的返利比例」卡片与动态使用说明，让用户直观看到
  分享后能拿到多少（同源 resolveRebateRatePercent 计算，与实际充值一致）
- 新增数据库迁移 132 添加 aff_rebate_rate_percent 与 aff_code_custom 列
- 新增 admin 路由组 /api/v1/admin/affiliates/users/* 共 5 个端点
- AffiliateService 改为只依赖 *SettingService，去除冗余的 SettingRepository
- 邀请码格式校验放宽到 [A-Z0-9_-]{4,32}，兼容旧 12 位系统码与新自定义码
- 补充单元测试与集成测试覆盖新方法、冲突路径与边界值

  - 修复返利不到账的根因：tryClaimAffiliateRebateAudit 中 PostgreSQL 参数类型推断冲突
  - 补全 OAuth 注册路径（LinuxDo/OIDC/WeChat/Pending Flow）的邀请码绑定
  - 前端 OAuth 注册页面传递 aff_code 参数
  - 新增返利冻结期机制：可配置冻结时间，到期后自动解冻（懒解冻）
  - 新增返利有效期：绑定后 N 天内有效，过期不再产生返利
  - 新增单人返利上限：超出上限部分精确截断
  - 增强返利流程 slog 结构化日志，便于排查问题
  - 已邀请用户列表增加返利明细列

- 在系统设置「功能开关」中新增邀请返利总开关，默认关闭；
  关闭态：菜单隐藏、注册忽略 aff、新充值不返利，但已有 quota 仍可转余额
- 支持管理员为指定用户设置专属邀请码（覆盖随机码，全局唯一）
- 支持管理员为指定用户设置专属返利比例（覆盖全局比例，可单条/批量调整）
- 在系统设置邀请返利卡片内嵌入专属用户管理表格（搜索/编辑/批量/删除），
  删除采用项目通用 ConfirmDialog，会同时清除专属比例并把邀请码重置为系统随机码
- /affiliate 用户页新增「我的返利比例」卡片与动态使用说明，让用户直观看到
  分享后能拿到多少（同源 resolveRebateRatePercent 计算，与实际充值一致）
- 新增数据库迁移 132 添加 aff_rebate_rate_percent 与 aff_code_custom 列
- 新增 admin 路由组 /api/v1/admin/affiliates/users/* 共 5 个端点
- AffiliateService 改为只依赖 *SettingService，去除冗余的 SettingRepository
- 邀请码格式校验放宽到 [A-Z0-9_-]{4,32}，兼容旧 12 位系统码与新自定义码
- 补充单元测试与集成测试覆盖新方法、冲突路径与边界值

- Extract PublicSettingsInjectionPayload named struct with drift test
- Add channel_monitor_default_interval_seconds to SSR injection
- Add image_output_price to SupportedModelChip
- Simplify AppSidebar buildSelfNavItems (admins see available channels)
- Add gateway WARN logs for 503 no-available-accounts branches
- Wire ChannelMonitorRunner into provideCleanup for graceful shutdown
- Add migrations 130/131 (CC template userid fix + mimicry field cleanup)
- Clean up fork-only features (sora, claude max simulation, client affinity)
- Remove ~320 obsolete i18n keys
- Add codexUsage utility, WechatServiceButton, BulkEditAccountModal
- Tidy go.sum

P0:
- rpm_override 嵌入 Auth Cache Snapshot，消除每请求 DB 查询 (snapshot v6→v7)
- 429 RPM 响应返回 Retry-After 头（当前分钟剩余秒数）

P1:
- ClearAll 按钮直连 DELETE API，带 loading 防重复
- 新增 GET /admin/users/:id/rpm-status 管理员 RPM 用量查询端点

优化:
- checkRPM 从级联互斥改为并行取最严，user.rpm_limit 作为全局硬上限始终生效
- Override/Group 变更后自动失效 auth cache
- fail-open 语义不变，Redis 故障不阻塞业务

Add a DB-backed soft switch "available_channels_enabled" controlling
the user-facing /channels/available endpoint and sidebar entry. Default
to false (opt-in) — the feature stays invisible until an admin enables
it under Admin Settings > Features.

- domain_constants: SettingKeyAvailableChannelsEnabled
- settings_view: AllSettings/PublicSettings + AvailableChannelsEnabled
- setting_service: public+all read/write, seed default "false",
  GetAvailableChannelsRuntime helper (fail-closed on read error)
- admin setting_handler: UpdateSettingsRequest *bool + update branch
  + audit diff entry
- public setting_handler: expose via GET /api/v1/settings
- available_channel_handler: featureEnabled() guard — returns empty
  list after auth when disabled (401 precedes the feature check to
  preserve existing behavior)

Settings:
- New "功能开关" tab between 通用设置 and 安全与认证
- ChannelMonitorEnabled toggle: runner skips scheduling when false,
  user-facing list returns empty
- ChannelMonitorDefaultIntervalSeconds (15-3600): pre-fills interval
  when creating a new monitor; each monitor can still override

Bug fix:
- ModelTagInput now commits pending input on blur, not just Enter/Tab.
  Previously clicking "save" with an un-Enter'd extra model would drop
  the value (DB stored extra_models=[] even when user typed entries).

Backend:
- domain_constants: SettingKeyChannelMonitor{Enabled,DefaultIntervalSeconds}
- SettingService.GetChannelMonitorRuntime: lightweight getter used by
  runner tick + user handler per-request (fail-open on DB error)
- Runner tickDueChecks: bails early when feature disabled
- ChannelMonitorUserHandler: checks feature flag before serving
- Comment on runner doc: scheduler state is implicit (every tick re-reads
  ListEnabled from DB), so CRUD ops on monitors self-maintain the schedule

Bump VERSION to 0.1.114.25

- Restore gateway_cache.go to upstream (no lua embeds)
- Restore payment_order.go to upstream (use out_trade_no lookup)
- Restore payment_fulfillment.go to upstream (same reason)
- Add FeaturesConfig field and IsWebSearchEmulationEnabled to Channel
- Add applyAccountStatsCost wrapper function
- Add SettingKeyWebSearchEmulationConfig constant
- Add WebSearchEmulationEnabled to SystemSettings
- Add notify code rate limiting methods to EmailCache interface
- Remove AllowUserRefund references (ent schema not present)
- Fix duplicate import in payment_handler.go
- Fix wire_gen.go argument mismatches

- Quota alert email now shows account ID and platform
- Balance low email includes a "Top Up Now" button when recharge URL is configured
- New setting: balance_low_notify_recharge_url in admin settings

- Change balance_notify_extra_emails and account_quota_notify_emails
  from []string to []NotifyEmailEntry{email, disabled, verified}
- Add per-email enable/disable toggle for both user and admin notifications
- Add PUT /user/notify-email/toggle API endpoint
- Fix critical bug: API key auth cache snapshot missing balance notify
  fields (Email, Username, BalanceNotifyEnabled, etc.), causing
  notifications to never fire on cached request paths
- Bump cache snapshot version 3→4 to invalidate stale entries
- Add SQL migration 104 to convert old format data
- Backward compatible: parseNotifyEmails auto-detects old/new format
- User balance notify: max 3 emails (primary + 2 extra)
- Admin quota notify: unlimited emails, each with toggle

- Show system default threshold as placeholder in custom threshold input
- Display user's primary email with "Primary" badge
- Support adding multiple pending emails before verification
- Each pending email has independent send/verify/resend flow
- Expose balance_low_notify_threshold in PublicSettings API
- Clean up timers on unmount to prevent leaks

- Add global toggle for account quota notification in admin settings
- Add percentage-based threshold type for per-account quota alerts
- Hide balance notify card on user profile when global toggle is off
- Expose balance_low_notify_enabled and account_quota_notify_enabled in PublicSettings
- Add threshold type (fixed/percentage) to QuotaNotifyToggle with $ / % switcher

Balance low notification only supports fixed USD amount threshold.
Percentage threshold is a quota concept, not applicable to balance.
Reverted threshold_type from admin settings, user profile, and all
backend/frontend layers. DB fields (balance_notify_threshold_type,
total_recharged) retained for potential future quota use.

- Add threshold_type field (fixed/percentage) to system and user settings
- Add total_recharged field to users table, auto-incremented on balance credit
- Percentage mode: effective threshold = total_recharged × percentage / 100
- User-level threshold_type inherits from system default when not set
- Update admin settings UI with radio selector (fixed amount / percentage)
- Migration: 102_add_balance_notify_threshold_type.sql

- User balance low notification: email alert when balance drops below
  configurable threshold (user email + verified extra emails)
- Account quota notification: broadcast email to admin-configured
  recipients when daily/weekly/total quota usage exceeds alert threshold
- Admin settings: global enable/disable, default threshold, quota
  notification email list (Email Settings tab)
- User profile: enable/disable, custom threshold, add/remove extra
  notification emails with verification code flow
- Account quota: per-dimension alert toggle and threshold in quota
  control card
- Trigger logic: first-crossing only (old >= threshold && new < threshold
  for balance; old < threshold && new >= threshold for quota), naturally
  prevents duplicate notifications without Redis dedup

Inject web search capability for Claude Console (API Key) accounts that
don't natively support Anthropic's web_search tool. When a pure
web_search request is detected, the gateway calls Brave Search or Tavily
API directly and constructs an Anthropic-protocol-compliant SSE/JSON
response without forwarding to upstream.

Backend:
- New `pkg/websearch/` SDK: Brave and Tavily provider implementations
  with io.LimitReader, proxy support, and Redis-based quota tracking
  (Lua atomic INCR + TTL, DECR rollback on failure)
- Global config via `settings.web_search_emulation_config` (JSON) with
  in-process cache + singleflight, input validation, API key merge on
  save, and sanitized API responses
- Channel-level toggle via `channels.features_config` JSONB column
  (DB migration 101)
- Account-level toggle via `accounts.extra.web_search_emulation`
- Request interception in `Forward()` with SSE streaming response
  construction using json.Marshal (no manual string concatenation)
- Manager hot-reload: `RebuildWebSearchManager()` called on config save
  and startup via `SetWebSearchRedisClient()`
- 70 unit tests covering providers, manager, config validation,
  sanitization, tool detection, query extraction, and response building

Frontend:
- Settings → Gateway tab: Web Search Emulation config card with global
  toggle, provider list (add/remove, API key, priority, quota, proxy)
- Channels → Anthropic tab: web search emulation toggle with global
  state linkage (disabled when global off)
- Account Create/Edit modals: web search emulation toggle for API Key
  type with Toggle component
- Full i18n coverage (zh + en)

Add a full payment and subscription system supporting EasyPay (Alipay/WeChat),
Stripe, and direct Alipay/WeChat Pay providers with multi-instance load balancing.

shaw authored Apr 08, 2026 and 陈曦 committed Apr 08, 2026

- Sync cc_version in x-anthropic-billing-header with the fingerprint
  User-Agent version, preserving the message-derived suffix
- Implement xxHash64-based CCH signing to replace the cch=00000
  placeholder with a computed hash
- Add admin toggle (enable_cch_signing) under gateway forwarding settings,
  disabled by default

- Sync cc_version in x-anthropic-billing-header with the fingerprint
  User-Agent version, preserving the message-derived suffix
- Implement xxHash64-based CCH signing to replace the cch=00000
  placeholder with a computed hash
- Add admin toggle (enable_cch_signing) under gateway forwarding settings,
  disabled by default

新增独立开关控制 API Key 账号的签名整流功能，支持配置自定义
匹配关键词以捕获不同格式的上游错误响应。

- 新增 apikey_signature_enabled 开关（默认关闭）
- 新增 apikey_signature_patterns 自定义关键词配置
- 内置签名检测规则对 API Key 账号同样生效
- 自定义关键词对完整响应体做不区分大小写匹配
- 重试二阶段检测仅做模式匹配，不重复校验开关
- Handler 层校验关键词数量（≤50）和长度（≤500）
- API 响应 nil patterns 统一序列化为空数组
- OAuth/SetupToken/Upstream/Bedrock 账号行为不变

- 新增 header_util.go，通过 setHeaderRaw/getHeaderRaw/addHeaderRaw 绕过
  Go 的 canonical-case 规范化，保持真实 Claude CLI 抓包的请求头大小写
  （如 "x-app" 而非 "X-App"，"X-Stainless-OS" 而非 "X-Stainless-Os"）
- 新增管理后台开关：指纹统一化（默认开启）和 metadata 透传（默认关闭），
  使用 atomic.Value + singleflight 缓存模式，60s TTL
- 调试日志从控制台 body 打印升级为文件级完整快照
  （按真实 wire 顺序输出 headers + 格式化 JSON body + 上下文元数据）
- 恢复 accept-encoding 到白名单，在 http_upstream.go 新增 decompressResponseBody
  处理 gzip/brotli/deflate 解压（Go 显式设置 Accept-Encoding 时不会自动解压）
- OAuth 服务 axios UA 从 1.8.4 更新至 1.13.6
- 测试断言改用 getHeaderRaw 适配 raw header 存储方式