GitLab

对称参照 Claude BetaPolicy 的 fast-mode 过滤实现，新增针对 OpenAI 上游
service_tier 字段（priority / flex，含客户端 "fast" → "priority" 归一化）的
pass / filter / block 三态策略，覆盖全部 OpenAI 入口 + admin 配置入口。

后端核心
- 新增 SettingKeyOpenAIFastPolicySettings、OpenAIFastPolicyRule、
  OpenAIFastPolicySettings 配置模型，含规则的 service_tier × action × scope
  × 模型白名单 × fallback action 维度。
- SettingService.Get/SetOpenAIFastPolicySettings；缺失时返回内置默认策略
  （所有模型的 priority 走 filter，whitelist 为空，fallback=pass）。设计
  依据：service_tier=fast 是用户级开关，与 model 字段正交，默认锁定特定
  model slug 会留下"用 gpt-4 + fast 透传 priority 上游"的绕过路径。JSON
  解析失败不再静默 fallback，slog.Warn 记录脏数据，便于运维定位。
- service_tier 归一化（trim + ToLower + fast→priority + 白名单 priority/flex）
  与策略评估（evaluateOpenAIFastPolicy）作为唯一真实来源，HTTP / WS 共用。
  抽出纯函数 evaluateOpenAIFastPolicyWithSettings，配合 ctx-bound settings
  快照（withOpenAIFastPolicyContext / openAIFastPolicySettingsFromContext），
  WS 长会话入口预取一次后所有帧复用，避免每帧打到 settingService。

HTTP 入口（4 个）
- Chat Completions、Anthropic 兼容（Messages，含 BetaFastMode→priority 二次
  命中）、原生 Responses、Passthrough Responses 全部接入
  applyOpenAIFastPolicyToBody，filter 走 sjson 顶层删除 service_tier，block
  返回 403 forbidden_error JSON。
- 4 入口统一使用 upstream 视角的 model（GetMappedModel +
  normalizeOpenAIModelForUpstream + Codex OAuth normalize 后的 slug），
  避免 chat/messages/native /responses/passthrough 因为 model 维度不同
  造成 whitelist 命中差异。
- 在 pass 路径也把客户端 "fast" 别名归一化为 "priority" 写回 body，
  否则 native /responses 与 passthrough 入口会把 "fast" 原样透传给上游
  导致 400/拒绝（chat-completions 入口的 normalizeResponsesBodyServiceTier
  此前已具备同等行为）。

WebSocket 入口
- 新增 applyOpenAIFastPolicyToWSResponseCreate：严格匹配
  type="response.create"，仅处理顶层 service_tier；filter 用 sjson 删字段，
  block 返回 typed *OpenAIFastBlockedError。
- ingress 路径在 parseClientPayload 内调用，block 命中先 Write Realtime
  风格 error event 再返回 OpenAIWSClientCloseError(StatusPolicyViolation
  =1008)，依赖底层 WebSocket Conn.Write 的同步 flush 保证 error 先于
  close。
- passthrough 路径在 RunEntry 前对 firstClientMessage 应用策略，并通过
  openAIWSPolicyEnforcingFrameConn 包装 ReadFrame 对每个 client→upstream
  帧执行策略；后续帧无 model 字段时回退到 capturedSessionModel。
  filter 闭包内同时侦测 session.update / session.created 帧的 session.model
  字段刷新 capturedSessionModel，封堵"首帧 model=gpt-4o（pass）→
  session.update 改为 gpt-5.5 → 不带 model 的 response.create fallback
  到 gpt-4o"的 mid-session 绕过路径。
- passthrough billing：requestServiceTier 在策略 filter 之后再从
  firstClientMessage 提取，filter 命中时 OpenAIForwardResult.ServiceTier
  上报 nil（default tier），与 HTTP 入口（reqBody 来自 post-filter map）
  / WS ingress（payload 来自 post-filter bytes）的语义一致。
- 错误事件 schema：{event_id: "evt_<32hex>", type: "error",
  error: {type: "forbidden_error", code: "policy_violation", message}}，
  与 OpenAI codex 客户端 error event 解析兼容。

Admin / Frontend
- dto.SystemSettings / UpdateSettingsRequest 新增
  openai_fast_policy_settings 字段（omitempty），bulk GET/PUT 接入。
- Settings 页 Gateway 页签新增 Fast/Flex Policy 表单卡片：
  service_tier × action × scope × 模型白名单 × fallback action 全字段配置。
- 前端守门：openaiFastPolicyLoaded 标志仅在 GET 真带回字段时才允许回写，
  避免 rollout/错误把默认规则覆盖成空；saveSettings 回写循环 skip 该字段，
  由专用刷新逻辑处理；仅 action=block 时发送 error_message，匹配后端
  omitempty 行为。

测试
- HTTP 路径：openai_fast_policy_test.go 覆盖默认配置（whitelist=[]，所有
  模型 priority filter）/ block 自定义错误 / scope 区分 / filter 删字段 /
  block 不改 body / block 短路上游 / Anthropic BetaFastMode 触发 OpenAI
  fast policy 等场景。
- WebSocket 路径：openai_fast_policy_ws_test.go 覆盖
    helper 单元（filter / fast→priority 归一化 / flex 透传 / block typed
    error / 无 service_tier 字节不变 / 非 response.create 帧不动 / 空 type
    帧不动 / event_id+code 字段断言 / 非字符串 service_tier 容错）+
    pass 路径 fast 别名归一化回归 +
    ingress 端到端（filter 后上游不含 service_tier / block 后客户端先收
    error event 再收 close 1008 且上游 0 写）+
    passthrough capturedSessionModel fallback 用例（whitelist 策略下首帧
    建立、缺 model 命中 fallback、缺少 fallback 时的 leak 文档化）+
    passthrough session.update / session.created 旋转 capturedSessionModel
    的 mid-session 绕过回归 +
    passthrough billing post-filter ServiceTier 与 idempotent filter 回归。
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

  - 修复返利不到账的根因：tryClaimAffiliateRebateAudit 中 PostgreSQL 参数类型推断冲突
  - 补全 OAuth 注册路径（LinuxDo/OIDC/WeChat/Pending Flow）的邀请码绑定
  - 前端 OAuth 注册页面传递 aff_code 参数
  - 新增返利冻结期机制：可配置冻结时间，到期后自动解冻（懒解冻）
  - 新增返利有效期：绑定后 N 天内有效，过期不再产生返利
  - 新增单人返利上限：超出上限部分精确截断
  - 增强返利流程 slog 结构化日志，便于排查问题
  - 已邀请用户列表增加返利明细列

- 在系统设置「功能开关」中新增邀请返利总开关，默认关闭；
  关闭态：菜单隐藏、注册忽略 aff、新充值不返利，但已有 quota 仍可转余额
- 支持管理员为指定用户设置专属邀请码（覆盖随机码，全局唯一）
- 支持管理员为指定用户设置专属返利比例（覆盖全局比例，可单条/批量调整）
- 在系统设置邀请返利卡片内嵌入专属用户管理表格（搜索/编辑/批量/删除），
  删除采用项目通用 ConfirmDialog，会同时清除专属比例并把邀请码重置为系统随机码
- /affiliate 用户页新增「我的返利比例」卡片与动态使用说明，让用户直观看到
  分享后能拿到多少（同源 resolveRebateRatePercent 计算，与实际充值一致）
- 新增数据库迁移 132 添加 aff_rebate_rate_percent 与 aff_code_custom 列
- 新增 admin 路由组 /api/v1/admin/affiliates/users/* 共 5 个端点
- AffiliateService 改为只依赖 *SettingService，去除冗余的 SettingRepository
- 邀请码格式校验放宽到 [A-Z0-9_-]{4,32}，兼容旧 12 位系统码与新自定义码
- 补充单元测试与集成测试覆盖新方法、冲突路径与边界值

Revert payment/wechat, sora/claude-max cleanup, fork-only migrations,
and cosmetic changes that were brought in by the release sync commit.
Keep only channel-monitor related improvements:
- PublicSettingsInjectionPayload named struct with drift test
- ChannelMonitorRunner graceful shutdown in wire
- image_output_price in SupportedModelChip
- Simplified buildSelfNavItems in AppSidebar
- Gateway WARN logs for 503 branches

- Extract PublicSettingsInjectionPayload named struct with drift test
- Add channel_monitor_default_interval_seconds to SSR injection
- Add image_output_price to SupportedModelChip
- Simplify AppSidebar buildSelfNavItems (admins see available channels)
- Add gateway WARN logs for 503 no-available-accounts branches
- Wire ChannelMonitorRunner into provideCleanup for graceful shutdown
- Add migrations 130/131 (CC template userid fix + mimicry field cleanup)
- Clean up fork-only features (sora, claude max simulation, client affinity)
- Remove ~320 obsolete i18n keys
- Add codexUsage utility, WechatServiceButton, BulkEditAccountModal
- Tidy go.sum

P0:
- rpm_override 嵌入 Auth Cache Snapshot，消除每请求 DB 查询 (snapshot v6→v7)
- 429 RPM 响应返回 Retry-After 头（当前分钟剩余秒数）

P1:
- ClearAll 按钮直连 DELETE API，带 loading 防重复
- 新增 GET /admin/users/:id/rpm-status 管理员 RPM 用量查询端点

优化:
- checkRPM 从级联互斥改为并行取最严，user.rpm_limit 作为全局硬上限始终生效
- Override/Group 变更后自动失效 auth cache
- fail-open 语义不变，Redis 故障不阻塞业务

Channel Monitor card now links to 渠道管理 > 渠道监控 and the Available
Channels card links to 渠道管理 > 渠道定价 so admins know where to go
after flipping the switch.

Settings:
- New "功能开关" tab between 通用设置 and 安全与认证
- ChannelMonitorEnabled toggle: runner skips scheduling when false,
  user-facing list returns empty
- ChannelMonitorDefaultIntervalSeconds (15-3600): pre-fills interval
  when creating a new monitor; each monitor can still override

Bug fix:
- ModelTagInput now commits pending input on blur, not just Enter/Tab.
  Previously clicking "save" with an un-Enter'd extra model would drop
  the value (DB stored extra_models=[] even when user typed entries).

Backend:
- domain_constants: SettingKeyChannelMonitor{Enabled,DefaultIntervalSeconds}
- SettingService.GetChannelMonitorRuntime: lightweight getter used by
  runner tick + user handler per-request (fail-open on DB error)
- Runner tickDueChecks: bails early when feature disabled
- ChannelMonitorUserHandler: checks feature flag before serving
- Comment on runner doc: scheduler state is implicit (every tick re-reads
  ListEnabled from DB), so CRUD ops on monitors self-maintain the schedule

Bump VERSION to 0.1.114.25

Pairs with the backend structured payment errors (reason + metadata). The
frontend now maps reason codes to localized messages with metadata as
interpolation variables, and automatically localizes raw config-field names
(e.g. "certSerial" → "证书序列号") using the existing UI-label i18n
namespace.

- frontend/src/utils/apiError.ts
  - extractApiErrorCode now prefers the string `reason` over the numeric HTTP
    `code`; reason is granular enough to drive i18n lookup, HTTP code is not.
  - New extractApiErrorMetadata to pull interpolation params off the error.
  - New extractI18nErrorMessage(err, t, namespace, fallback): looks up
    `<namespace>.<REASON>` in i18n and substitutes metadata. Before
    substitution, `metadata.key` and `metadata.keys` (slash-joined) are
    re-translated through `admin.settings.payment.field_<key>` so users see
    "缺少必填项：证书序列号" instead of "缺少必填项：certSerial".

- frontend/src/i18n/locales/{zh,en}.ts
  - Add payment.errors entries for every structured reason code returned by
    the backend (PAYMENT_DISABLED, INVALID_AMOUNT, TOO_MANY_PENDING,
    DAILY_LIMIT_EXCEEDED, NO_AVAILABLE_INSTANCE, PAYMENT_PROVIDER_MISCONFIGURED,
    WXPAY_CONFIG_MISSING_KEY / INVALID_KEY_LENGTH / INVALID_KEY, NOT_FOUND,
    FORBIDDEN, CONFLICT, INVALID_ORDER_TYPE, INVALID_STATUS,
    BALANCE_NOT_ENOUGH, REFUND_AMOUNT_EXCEEDED, REFUND_FAILED, and more),
    with placeholders for template variables.

- 13 payment-related Vue files
  - Migrate catch-block error reporting from extractApiErrorMessage to
    extractI18nErrorMessage(err, t, 'payment.errors', fallback).
  - Remove the ad-hoc paymentErrorMap computed in SettingsView.vue, which the
    new helper supersedes (it reads i18n directly via t).

- frontend/src/components/payment/providerConfig.ts
  - wxpay: publicKey and publicKeyId are now required (was optional), matching
    the pubkey-only verifier direction; certSerial is already required.

This PR is drop-in safe: reason-preferring extractApiErrorCode is backward
compatible with callers that pass their own i18nMap, and error codes missing
from i18n fall back to the existing message-based path.

Backend:
- Validate recharge_fee_rate: 0 ≤ rate ≤ 100, max 2 decimal places

Frontend settings:
- Add % suffix icon to fee rate input
- Enforce max=100, min=0, step=0.01 with 2 decimal precision

- Add recharge_fee_rate system setting (percentage fee on top of recharge amount)
- Full backend chain: config constant, PaymentConfig struct, update validation,
  read/write persistence, DTO, handler GET/PUT responses
- Frontend: settings input with preview, i18n (zh/en), API types
- Fix provider card toggle layout: labels above switches to save width
- Fix Chinese translation: "EasyPay" → "易支付" in provider description

- Add balance_recharge_multiplier system setting (e.g. 1.2 = charge 100 get 120)
- Separate order_amount (credited balance) from pay_amount (actual payment)
- Refund calculates gateway amount proportionally from pay_amount
- Frontend shows both amounts in order details, payment status, refund dialog
- Admin settings UI for configuring recharge multiplier

Backend:
- gateway_handler: pass subject.UserID instead of int64(0) for user-level routing
- setting_handler: add missing BalanceLowNotifyRechargeURL to UpdateSettings response
- openai_gateway_service: use applyAccountStatsCost for account stats pricing integration
- embed_on: add local file override (data/public/) for embedded frontend assets

Frontend:
- useTableSelection: add batchUpdate method for batch operations
- AccountsView: virtual scrolling params, Set-based isSelected, swipe virtualization
- ProxiesView: add batchUpdate to selection and swipe-select
- BulkEditAccountModal: fix submit handler to prevent event object as argument
- SettingsView: move payload construction outside try block
- i18n: add general translation keys (saved, deleted, view, validation, allowUserRefund)
- api/client: reorder error fields for consistency
- stores/payment: clarify pollOrderStatus JSDoc

allow_user_refund:
- Add allow_user_refund field to PaymentProviderInstance ent schema
- Migration 103: ALTER TABLE payment_provider_instances ADD COLUMN
- Cascade logic: disabling refund_enabled auto-disables allow_user_refund
- User refund validation: check provider instance allows user refund
- Admin refund validation: check provider instance allows admin refund
- Subscription refund: deduct days on refund, rollback on failure
- New endpoint: GET /payment/orders/refund-eligible-providers
- Frontend: ToggleSwitch in ProviderCard/Dialog, cascade in SettingsView

Wildcard matching:
- Change findPricingForModel from "longest prefix wins" to "config order
  priority (first match wins)", aligning with channel service behavior

- QuotaLimit changed to *int64 (null=unlimited, >0=limited)
- Add reset-usage endpoint (POST /admin/settings/web-search-emulation/reset-usage)
- Show quota usage in header always (collapsed and expanded)
- Add reset quota button in expanded provider view
- Quota input: empty=unlimited with ∞ placeholder, must be >0 if set
- Add email verification hint on balance notify card

The buttons were hidden because v-if only checked provider.api_key,
which is always empty for saved providers (backend sanitizes it).
Now also checks api_key_configured. Copy button is disabled when
no actual key is available (only configured placeholder shown).

- Quota alert email now shows account ID and platform
- Balance low email includes a "Top Up Now" button when recharge URL is configured
- New setting: balance_low_notify_recharge_url in admin settings

Backend fixes:
- Fix balance notify ignoring percentage threshold type (was treating
  percentage value as fixed USD amount)
- Remove dead code parseJSONStringArray
- Add ImageOutputTokens to tryModelFilePricing calculation
- Unify zero-value check: cost == 0 → cost <= 0 in calculateTokenStatsCost
- Use MarshalNotifyEmails instead of json.Marshal for consistency
- Rename quotaDim.oldUsed → currentUsed for clarity
- Extract HTML email templates to const variables (function ≤30 lines)

Test fixes:
- Rewrite account_websearch_test.go for GetWebSearchEmulationMode tri-state
- Add 6 tryModelFilePricing test cases

Frontend fixes:
- Replace hardcoded '未命名' with i18n key
- Extract getBillingModeLabel/getBillingModeBadgeClass to shared utils
- Replace inline type with imported NotifyEmailEntry
- Pass platform to AccountStats pricing rules via inferRulePlatform()
- Add billing mode constants (BILLING_MODE_TOKEN/PER_REQUEST/IMAGE)

- Change balance_notify_extra_emails and account_quota_notify_emails
  from []string to []NotifyEmailEntry{email, disabled, verified}
- Add per-email enable/disable toggle for both user and admin notifications
- Add PUT /user/notify-email/toggle API endpoint
- Fix critical bug: API key auth cache snapshot missing balance notify
  fields (Email, Username, BalanceNotifyEnabled, etc.), causing
  notifications to never fire on cached request paths
- Bump cache snapshot version 3→4 to invalidate stale entries
- Add SQL migration 104 to convert old format data
- Backward compatible: parseNotifyEmails auto-detects old/new format
- User balance notify: max 3 emails (primary + 2 extra)
- Admin quota notify: unlimited emails, each with toggle

Only show the inline eye/copy buttons when provider.api_key has a value.
When only api_key_configured is true (saved key, not loaded), buttons are
hidden since there's nothing to show/copy.