GitLab

fix(anthropic): drop empty Read.pages in responses-to-anthropic tool input

fix(openai): avoid implicit image sticky sessions

fix(payment): 修复 Zpay 退款接口调用

fix(anthropic): 修正缓存 token 的 Anthropic 用量语义

  - 修复返利不到账的根因：tryClaimAffiliateRebateAudit 中 PostgreSQL 参数类型推断冲突
  - 补全 OAuth 注册路径（LinuxDo/OIDC/WeChat/Pending Flow）的邀请码绑定
  - 前端 OAuth 注册页面传递 aff_code 参数
  - 新增返利冻结期机制：可配置冻结时间，到期后自动解冻（懒解冻）
  - 新增返利有效期：绑定后 N 天内有效，过期不再产生返利
  - 新增单人返利上限：超出上限部分精确截断
  - 增强返利流程 slog 结构化日志，便于排查问题
  - 已邀请用户列表增加返利明细列

PR #1914 unconditionally applied the full mimicry pipeline to all OAuth
accounts, including real Claude Code CLI clients. This replaced the
client's long system prompt (~10K+ tokens with stable cache_control
breakpoints) with a short ~45 token [billing, CC prompt] pair, which
falls below Anthropic's 1024-token minimum cacheable prefix threshold.
The result: every request created a new cache but never hit an existing
one.

Fix: restore the Claude Code client detection gate so that real CC
clients bypass body-level mimicry (system rewrite, message cache
management, tool name obfuscation). Non-CC third-party clients
(opencode, etc.) continue to receive full mimicry.

Also harden the detection logic:
- Make UA regex case-insensitive (align with claude_code_validator.go)
- Validate metadata.user_id format via ParseMetadataUserID() instead of
  just checking non-empty, preventing third-party tools from spoofing
  a claude-cli/* UA with an arbitrary user_id string to bypass mimicry

Stripe payment routes (/payment/stripe, /payment/stripe-popup) are
reached via hard navigation (window.location.href), which caused
the router guard to block access before the page could load.
Set requiresAuth and requiresPayment to false, consistent with
/payment/result. Backend API still enforces authentication.

- gofmt: realign AffiliateDetail struct tags in affiliate_service.go
- ineffassign: remove dead seenCompleted assignment before return in account_test_service.go

fix(openai): tighten responses stream account tests

fix(openai): keep responses stream alive during pre-output failover

- 在系统设置「功能开关」中新增邀请返利总开关，默认关闭；
  关闭态：菜单隐藏、注册忽略 aff、新充值不返利，但已有 quota 仍可转余额
- 支持管理员为指定用户设置专属邀请码（覆盖随机码，全局唯一）
- 支持管理员为指定用户设置专属返利比例（覆盖全局比例，可单条/批量调整）
- 在系统设置邀请返利卡片内嵌入专属用户管理表格（搜索/编辑/批量/删除），
  删除采用项目通用 ConfirmDialog，会同时清除专属比例并把邀请码重置为系统随机码
- /affiliate 用户页新增「我的返利比例」卡片与动态使用说明，让用户直观看到
  分享后能拿到多少（同源 resolveRebateRatePercent 计算，与实际充值一致）
- 新增数据库迁移 132 添加 aff_rebate_rate_percent 与 aff_code_custom 列
- 新增 admin 路由组 /api/v1/admin/affiliates/users/* 共 5 个端点
- AffiliateService 改为只依赖 *SettingService，去除冗余的 SettingRepository
- 邀请码格式校验放宽到 [A-Z0-9_-]{4,32}，兼容旧 12 位系统码与新自定义码
- 补充单元测试与集成测试覆盖新方法、冲突路径与边界值

fix(openai): 修复 Responses 流式失败前置事件导致无法 failover

fix(openai): bump codex CLI version from 0.104.0 to 0.125.0

将 vansour/sub2api#1555 的 OpenAI compact 能力建模手工移植到当前 main：账号
级 compact 状态/auto-force_on-force_off 模式、compact-only 模型映射、调度器
tier 分层（已支持 > 未知 > 已知不支持）、管理后台 compact 主动探测，以及对应
i18n/状态徽章。普通 /responses 流量行为不变，无数据库迁移。

The hardcoded codex CLI version (0.104.0) causes upstream rejection
when using gpt-5.5 with compact, as the server treats the request
as an outdated client and returns 400/502.

Update codexCLIVersion, codexCLIUserAgent, and openAICodexProbeVersion
to 0.125.0 to match the current Codex CLI release.

Fixes #1933, #1887, #1865
Related: #1609, #1298, #849

[codex] reconcile OpenAI admin test rate-limit state

VISIBLE_METHOD_ALIASES 漏了 stripe，导致 getVisibleMethods 把后端返回
的 stripe 过滤掉。点 Stripe 按钮时省略 method 查询参数，让落地页渲染
完整的 Payment Element。

fix(apicompat): recognize web_search_20250305 / google_search in Responses→Anthropic tool conversion

- staticcheck QF1001: apply De Morgan's law to the OAuth-mimic header
  passthrough guard (`!(a && b)` → `a != ... || !b`).
- unused: drop `isClaudeCodeRequest`, which became dead after PR #1914
  switched both `/v1/messages` and `/count_tokens` paths to unconditional
  `account.IsOAuth()` mimicry. The lowercase helper `isClaudeCodeClient`
  is kept (still referenced by `TestIsClaudeCodeClient`).

fix(claude): align Claude Code OAuth mimicry with real CLI traffic

- Drop SetAffiliateService setters and ProvideAuthService /
  ProvidePaymentService / ProvideUserHandler wrappers in favor of direct
  Wire constructor injection. AffiliateService has no back-edge to
  Auth/Payment/User, so the indirection was never required.
- Change RegisterWithVerification's variadic affiliateCode to a fixed
  parameter; adjust all call sites.
- Validate aff_code length and charset in BindInviterByCode before any
  DB lookup, eliminating timing-side-channel and useless DB roundtrips
  on malformed input.
- Make affiliate cache invalidation synchronous; surface Redis errors
  via the project logger instead of swallowing them in a detached
  goroutine.
- Add an integration test guarding cross-layer tx propagation in
  AccrueQuota and a unit test pinning the aff_code format rules.

fix(apicompat): recognize web_search_20250305 / google_search in Responses to Anthropic tool conversion

Root cause of persistent third-party detection: sub2api's
buildUpstreamRequest transparently forwards client headers via
allowedHeaders whitelist (addHeaderRaw) before applying mimicry
overrides. When third-party clients (opencode, etc.) send their own
anthropic-beta / user-agent / x-stainless-* / x-claude-code-session-id
values, these get appended to the request alongside our injected
headers, creating an inconsistent header set that Anthropic detects.

Parrot's build_upstream_headers constructs exactly 9 headers from
scratch and never forwards anything from the client. This is why
'same opencode version, some users work some don't' — different
opencode configs/versions send different header combinations.

Fix: when tokenType=oauth and mimicClaudeCode=true, skip the
client header passthrough loop entirely. The subsequent
applyClaudeCodeMimicHeaders + ApplyFingerprint + beta merge
pipeline constructs all necessary headers from our controlled values.

Also: remove systemIncludesClaudeCodePrompt gate — OAuth accounts
now unconditionally rewrite system (even if client already sent a
Claude Code-style prompt), ensuring billing attribution block is
always present.

Before: isClaudeCodeRequest() checked whether the client looks like a
real Claude Code CLI (UA, system prompt, X-App header, metadata format).
If it looked like Claude Code, all mimicry was skipped — the assumption
being that a real CLI needs no help.

Problem: third-party tools like opencode partially impersonate Claude
Code (sending claude-cli UA + claude-code beta + CC system prompt) but
miss critical details (billing attribution block, tool-name obfuscation,
cache breakpoints, full beta set). Some users' opencode instances pass
the isClaudeCodeRequest check, causing sub2api to skip mimicry entirely,
while Anthropic still detects the request as third-party.

This explains why 'same opencode version, some users work, some don't'
— it depends on which opencode features/config trigger the validator.

Fix: OAuth accounts now unconditionally run the full mimicry pipeline,
matching Parrot's behavior (Parrot never checks client identity).
This is safe because our mimicry is strictly more complete than any
third-party client's partial impersonation.

Changed:
  - /v1/messages path: remove isClaudeCode gate
  - /v1/messages/count_tokens path: same

The previous commit only wired stripMessageCacheControl,
addMessageCacheBreakpoints, and tool-name obfuscation into
applyClaudeCodeOAuthMimicryToBody (used by /chat/completions and
/responses). The native /v1/messages path and count_tokens path
have their own independent mimicry code blocks and were missed.

Now all three entry points share the same D/E/F pipeline:
  - /v1/messages (gateway_service.go forwardAnthropic)
  - /v1/messages/count_tokens (gateway_service.go countTokens)
  - OpenAI compat (applyClaudeCodeOAuthMimicryToBody)