Version-specific update instructions (PREMIUM SELF)

Review this page for update instructions for your version. These steps accompany the general steps for updating Geo sites.

Updating to 14.2 through 14.7

There is an issue in GitLab 14.2 through 14.7 that affects Geo when the GitLab-managed object storage replication is used, causing blob object types to fail synchronization.

Since GitLab 14.2, verification failures result in synchronization failures and cause a resynchronization of these objects.

As verification is not yet implemented for files stored in object storage (see issue 13845 for more details), this results in a loop that consistently fails for all objects stored in object storage.

For information on how to fix this, see Troubleshooting - Failed syncs with GitLab-managed object storage replication.

Updating to 14.4

There is an issue in GitLab 14.4.0 through 14.4.2 that can affect Geo and other features that rely on cronjobs. We recommend upgrading to GitLab 14.4.3 or later.

Updating to 14.1, 14.2, 14.3

Multi-arch images

We found an issue where the Container Registry replication wasn't fully working if you used multi-arch images. In case of a multi-arch image, only the primary architecture (for example amd64) would be replicated to the secondary site. This has been fixed in GitLab 14.3 and was backported to 14.2 and 14.1, but manual steps are required to force a re-sync.

You can check if you are affected by running:

docker manifest inspect <SECONDARY_IMAGE_LOCATION> | jq '.mediaType'

Where <SECONDARY_IMAGE_LOCATION> is a container image on your secondary site. If the output matches application/vnd.docker.distribution.manifest.list.v2+json (there can be a mediaType entry at several levels, we only care about the top level entry), then you don't need to do anything.

Otherwise, for each secondary site, on a Rails application node, open a Rails console, and run the following:

list_type = 'application/vnd.docker.distribution.manifest.list.v2+json'

Geo::ContainerRepositoryRegistry.synced.each do |gcr|
  cr = gcr.container_repository
  primary = Geo::ContainerRepositorySync.new(cr)
  cr.tags.each do |tag|
    primary_manifest = JSON.parse(primary.send(:client).repository_raw_manifest(cr.path, tag.name))
    next unless primary_manifest['mediaType'].eql?(list_type)

    cr.delete_tag_by_name(tag.name)
  end
  primary.execute
end

If you are running a version prior to 14.1 and are using Geo and multi-arch containers in your Container Registry, we recommend upgrading to at least GitLab 14.1.

Geo Admin Area shows 'Unhealthy' after enabling Maintenance Mode

GitLab 13.9 through GitLab 14.3 are affected by a bug in which enabling GitLab Maintenance Mode causes Geo secondary site statuses to appear to stop updating and become unhealthy. For more information, see Troubleshooting - Geo Admin Area shows 'Unhealthy' after enabling Maintenance Mode.

Updating to GitLab 14.0/14.1

Primary sites can not be removed from the UI

We found an issue where Primary sites can not be removed from the UI.

This bug only exists in the UI and does not block the removal of Primary sites using any other method.

If you are running an affected version and need to remove your Primary site, you can manually remove the Primary site by using the Geo Sites API.

Geo Admin Area shows 'Unhealthy' after enabling Maintenance Mode

Updating to GitLab 13.12

Secondary sites re-download all LFS files upon update

We found an issue where secondary sites re-download all LFS files upon update. This bug:

Only applies to Geo secondary sites that have replicated LFS objects.
Is not a data loss risk.
Causes churn and wasted bandwidth re-downloading all LFS objects.
May impact performance for GitLab installations with a large number of LFS files.

If you don't have many LFS objects or can stand a bit of churn, then it is safe to let the secondary sites re-download LFS objects. If you do have many LFS objects, or many Geo secondary sites, or limited bandwidth, or a combination of them all, then we recommend you skip GitLab 13.12.0 through 13.12.6 and update to GitLab 13.12.7 or newer.

If you have already updated to an affected version, and the re-sync is ongoing

You can manually migrate the legacy sync state to the new state column by running the following command in a Rails console. It should take under a minute:

Geo::LfsObjectRegistry.where(state: 0, success: true).update_all(state: 2)

Geo Admin Area shows 'Unhealthy' after enabling Maintenance Mode

Updating to GitLab 13.11

We found an issue with Git clone/pull through HTTP(s) on Geo secondaries and on any GitLab instance if maintenance mode is enabled. This was caused by a regression in GitLab Workhorse. This is fixed in the GitLab 13.11.4 patch release. To avoid this issue, upgrade to GitLab 13.11.4 or later.

Geo Admin Area shows 'Unhealthy' after enabling Maintenance Mode

Updating to GitLab 13.10

Geo Admin Area shows 'Unhealthy' after enabling Maintenance Mode

Updating to GitLab 13.9

Error during zero-downtime update: "cannot drop column asset_proxy_whitelist"

We've detected an issue with a column rename that prevents upgrades to GitLab 13.9.0, 13.9.1, 13.9.2 and 13.9.3 when following the zero-downtime steps. It is necessary to perform the following additional steps for the zero-downtime update:

Before running the final sudo gitlab-rake db:migrate command on the deploy node, execute the following queries using the PostgreSQL console (or sudo gitlab-psql) to drop the problematic triggers:

drop trigger trigger_e40a6f1858e6 on application_settings;
drop trigger trigger_0d588df444c8 on application_settings;
drop trigger trigger_1572cbc9a15f on application_settings;
drop trigger trigger_22a39c5c25f3 on application_settings;

Run the final migrations:
```
sudo gitlab-rake db:migrate
```

If you have already run the final sudo gitlab-rake db:migrate command on the deploy node and have encountered the column rename issue, you might see the following error:

-- remove_column(:application_settings, :asset_proxy_whitelist)
rake aborted!
StandardError: An error has occurred, all later migrations canceled:
PG::DependentObjectsStillExist: ERROR: cannot drop column asset_proxy_whitelist of table application_settings because other objects depend on it
DETAIL: trigger trigger_0d588df444c8 on table application_settings depends on column asset_proxy_whitelist of table application_settings

To work around this bug, follow the previous steps to complete the update. More details are available in this issue.

Geo Admin Area shows 'Unhealthy' after enabling Maintenance Mode

Updating to GitLab 13.7

We've detected an issue with the FetchRemove call used by Geo secondaries. This causes performance issues as we execute reference transaction hooks for each updated reference. Delay any upgrade attempts until this is in the 13.7.5 patch release.. More details are available in this issue.

Updating to GitLab 13.5

GitLab 13.5 has a regression that prevents viewing a list of container repositories and registries on Geo secondaries. This issue is fixed in GitLab 13.6.1 and later.

Updating to GitLab 13.3

In GitLab 13.3, Geo removed the PostgreSQL Foreign Data Wrapper dependency for the tracking database.

The FDW server, user, and the extension is removed during the upgrade process on each secondary site. The GitLab settings related to the FDW in the /etc/gitlab/gitlab.rb have been deprecated and can be safely removed.

There are some scenarios like using an external PostgreSQL instance for the tracking database where the FDW settings must be removed manually. Enter the PostgreSQL console of that instance and remove them:

DROP SERVER gitlab_secondary CASCADE;
DROP EXTENSION IF EXISTS postgres_fdw;

WARNING: In GitLab 13.3, promoting a secondary site to a primary while the secondary is paused fails. Do not pause replication before promoting a secondary. If the site is paused, be sure to resume before promoting. To avoid this issue, upgrade to GitLab 13.4 or later.

WARNING: Promoting the database during a failover can fail on XFS and filesystems ordering files lexically, when using --force or --skip-preflight-checks, due to an issue fixed in 13.5. The troubleshooting steps contain a workaround if you run into errors during the failover.

Updating to GitLab 13.2

In GitLab 13.2, promoting a secondary site to a primary while the secondary is paused fails. Do not pause replication before promoting a secondary. If the site is paused, be sure to resume before promoting. To avoid this issue, upgrade to GitLab 13.4 or later.

Updating to GitLab 13.0

Upgrading to GitLab 13.0 requires GitLab 12.10 to already be using PostgreSQL version 11. For the recommended procedure, see the Omnibus GitLab documentation.

Updating to GitLab 12.10

GitLab 12.10 doesn't attempt to update the embedded PostgreSQL server when using Geo, because the PostgreSQL upgrade requires downtime for secondaries while reinitializing streaming replication. It must be upgraded manually. For the recommended procedure, see the Omnibus GitLab documentation.

Updating to GitLab 12.9

WARNING: GitLab 12.9.0 through GitLab 12.9.3 are affected by a bug that stops repository verification. The issue is fixed in GitLab 12.9.4. Upgrade to GitLab 12.9.4 or later.

By default, GitLab 12.9 attempts to update the embedded PostgreSQL server version from 9.6 to 10.12, which requires downtime on secondaries while reinitializing streaming replication. For the recommended procedure, see the Omnibus GitLab documentation.