platform_def.h

/*
 * Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef __PLATFORM_DEF_H__
#define __PLATFORM_DEF_H__

#include <arm_def.h>
#include <board_arm_def.h>
#include <common_def.h>
#include <tzc400.h>
#include <v2m_def.h>
#include "../fvp_def.h"

/* Required platform porting definitions */
#define PLAT_NUM_PWR_DOMAINS		(FVP_CLUSTER_COUNT + \
					PLATFORM_CORE_COUNT)
#define PLAT_MAX_PWR_LVL		ARM_PWR_LVL1
#define PLATFORM_CORE_COUNT		(FVP_CLUSTER_COUNT * FVP_MAX_CPUS_PER_CLUSTER)

/*
 * Other platform porting definitions are provided by included headers
 */

/*
 * Required ARM standard platform porting definitions
 */
#define PLAT_ARM_CLUSTER_COUNT		FVP_CLUSTER_COUNT

#define PLAT_ARM_TRUSTED_ROM_BASE	0x00000000
#define PLAT_ARM_TRUSTED_ROM_SIZE	0x04000000	/* 64 MB */

#define PLAT_ARM_TRUSTED_DRAM_BASE	0x06000000
#define PLAT_ARM_TRUSTED_DRAM_SIZE	0x02000000	/* 32 MB */

/* No SCP in FVP */
#define PLAT_ARM_SCP_TZC_DRAM1_SIZE	MAKE_ULL(0x0)

#define PLAT_ARM_DRAM2_SIZE		MAKE_ULL(0x780000000)

#define PLAT_ARM_SHARED_RAM_CACHED	1

/*
 * Load address of BL33 for this platform port
 */
#define PLAT_ARM_NS_IMAGE_OFFSET	(ARM_DRAM1_BASE + 0x8000000)


/*
 * PL011 related constants
 */
#define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
#define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ

#define PLAT_ARM_BL31_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
#define PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ

#define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_BL31_RUN_UART_BASE
#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ

#define PLAT_ARM_TSP_UART_BASE		V2M_IOFPGA_UART2_BASE
#define PLAT_ARM_TSP_UART_CLK_IN_HZ	V2M_IOFPGA_UART2_CLK_IN_HZ

/* CCI related constants */
#define PLAT_ARM_CCI_BASE		0x2c090000
#define PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX	3
#define PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX	4

/* System timer related constants */
#define PLAT_ARM_NSTIMER_FRAME_ID		1

/* Mailbox base address */
#define PLAT_ARM_TRUSTED_MAILBOX_BASE	ARM_TRUSTED_SRAM_BASE


/* TrustZone controller related constants
 *
 * Currently only filters 0 and 2 are connected on Base FVP.
 * Filter 0 : CPU clusters (no access to DRAM by default)
 * Filter 1 : not connected
 * Filter 2 : LCDs (access to VRAM allowed by default)
 * Filter 3 : not connected
 * Programming unconnected filters will have no effect at the
 * moment. These filter could, however, be connected in future.
 * So care should be taken not to configure the unused filters.
 *
 * Allow only non-secure access to all DRAM to supported devices.
 * Give access to the CPUs and Virtio. Some devices
 * would normally use the default ID so allow that too.
 */
#define PLAT_ARM_TZC_BASE		0x2a4a0000
#define PLAT_ARM_TZC_FILTERS		REG_ATTR_FILTER_BIT(0)

#define PLAT_ARM_TZC_NS_DEV_ACCESS	(				\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT)	|	\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI)		|	\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP)		|	\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO)	|	\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD))

/*
 * GIC related constants to cater for both GICv2 and GICv3 instances of an
 * FVP. They could be overriden at runtime in case the FVP implements the legacy
 * VE memory map.
 */
#define PLAT_ARM_GICD_BASE		BASE_GICD_BASE
#define PLAT_ARM_GICR_BASE		BASE_GICR_BASE
#define PLAT_ARM_GICC_BASE		BASE_GICC_BASE

/*
 * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
 * terminology. On a GICv2 system or mode, the lists will be merged and treated
 * as Group 0 interrupts.
 */
#define PLAT_ARM_G1S_IRQS		ARM_G1S_IRQS,			\
					FVP_IRQ_TZ_WDOG,		\
					FVP_IRQ_SEC_SYS_TIMER

#define PLAT_ARM_G0_IRQS		ARM_G0_IRQS

/*
 * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
 * plus a little space for growth.
 */
#if TRUSTED_BOARD_BOOT
# define PLAT_ARM_MAX_BL1_RW_SIZE	0x9000
#else
# define PLAT_ARM_MAX_BL1_RW_SIZE	0x6000
#endif

/*
 * PLAT_ARM_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
 * little space for growth.
 */
#if TRUSTED_BOARD_BOOT
# define PLAT_ARM_MAX_BL2_SIZE		0x1D000
#else
# define PLAT_ARM_MAX_BL2_SIZE		0xC000
#endif

/*
 * PLAT_ARM_MAX_BL31_SIZE is calculated using the current BL31 debug size plus a
 * little space for growth.
 */
#define PLAT_ARM_MAX_BL31_SIZE		0x1D000

#endif /* __PLATFORM_DEF_H__ */