1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
/*
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef PL011_H
#define PL011_H
#include <drivers/console.h>
/* PL011 Registers */
#define UARTDR 0x000
#define UARTRSR 0x004
#define UARTECR 0x004
#define UARTFR 0x018
#define UARTIMSC 0x038
#define UARTRIS 0x03C
#define UARTICR 0x044
/* PL011 registers (out of the SBSA specification) */
#if !PL011_GENERIC_UART
#define UARTILPR 0x020
#define UARTIBRD 0x024
#define UARTFBRD 0x028
#define UARTLCR_H 0x02C
#define UARTCR 0x030
#define UARTIFLS 0x034
#define UARTMIS 0x040
#define UARTDMACR 0x048
#endif /* !PL011_GENERIC_UART */
/* Data status bits */
#define UART_DATA_ERROR_MASK 0x0F00
/* Status reg bits */
#define UART_STATUS_ERROR_MASK 0x0F
/* Flag reg bits */
#define PL011_UARTFR_RI (1 << 8) /* Ring indicator */
#define PL011_UARTFR_TXFE (1 << 7) /* Transmit FIFO empty */
#define PL011_UARTFR_RXFF (1 << 6) /* Receive FIFO full */
#define PL011_UARTFR_TXFF (1 << 5) /* Transmit FIFO full */
#define PL011_UARTFR_RXFE (1 << 4) /* Receive FIFO empty */
#define PL011_UARTFR_BUSY (1 << 3) /* UART busy */
#define PL011_UARTFR_DCD (1 << 2) /* Data carrier detect */
#define PL011_UARTFR_DSR (1 << 1) /* Data set ready */
#define PL011_UARTFR_CTS (1 << 0) /* Clear to send */
#define PL011_UARTFR_TXFF_BIT 5 /* Transmit FIFO full bit in UARTFR register */
#define PL011_UARTFR_RXFE_BIT 4 /* Receive FIFO empty bit in UARTFR register */
#define PL011_UARTFR_BUSY_BIT 3 /* UART busy bit in UARTFR register */
/* Control reg bits */
#if !PL011_GENERIC_UART
#define PL011_UARTCR_CTSEN (1 << 15) /* CTS hardware flow control enable */
#define PL011_UARTCR_RTSEN (1 << 14) /* RTS hardware flow control enable */
#define PL011_UARTCR_RTS (1 << 11) /* Request to send */
#define PL011_UARTCR_DTR (1 << 10) /* Data transmit ready. */
#define PL011_UARTCR_RXE (1 << 9) /* Receive enable */
#define PL011_UARTCR_TXE (1 << 8) /* Transmit enable */
#define PL011_UARTCR_LBE (1 << 7) /* Loopback enable */
#define PL011_UARTCR_UARTEN (1 << 0) /* UART Enable */
#if !defined(PL011_LINE_CONTROL)
/* FIFO Enabled / No Parity / 8 Data bit / One Stop Bit */
#define PL011_LINE_CONTROL (PL011_UARTLCR_H_FEN | PL011_UARTLCR_H_WLEN_8)
#endif
/* Line Control Register Bits */
#define PL011_UARTLCR_H_SPS (1 << 7) /* Stick parity select */
#define PL011_UARTLCR_H_WLEN_8 (3 << 5)
#define PL011_UARTLCR_H_WLEN_7 (2 << 5)
#define PL011_UARTLCR_H_WLEN_6 (1 << 5)
#define PL011_UARTLCR_H_WLEN_5 (0 << 5)
#define PL011_UARTLCR_H_FEN (1 << 4) /* FIFOs Enable */
#define PL011_UARTLCR_H_STP2 (1 << 3) /* Two stop bits select */
#define PL011_UARTLCR_H_EPS (1 << 2) /* Even parity select */
#define PL011_UARTLCR_H_PEN (1 << 1) /* Parity Enable */
#define PL011_UARTLCR_H_BRK (1 << 0) /* Send break */
#endif /* !PL011_GENERIC_UART */
#define CONSOLE_T_PL011_BASE CONSOLE_T_DRVDATA
#ifndef __ASSEMBLER__
#include <stdint.h>
typedef struct {
console_t console;
uintptr_t base;
} console_pl011_t;
/*
* Initialize a new PL011 console instance and register it with the console
* framework. The |console| pointer must point to storage that will be valid
* for the lifetime of the console, such as a global or static local variable.
* Its contents will be reinitialized from scratch.
*/
int console_pl011_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
console_pl011_t *console);
#endif /*__ASSEMBLER__*/
#endif /* PL011_H */