1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <asm_macros.S>
#include <bl_common.h>
#include <cm_macros.S>
.globl bl31_entrypoint
/* -----------------------------------------------------
* bl31_entrypoint() is the cold boot entrypoint,
* executed only by the primary cpu.
* -----------------------------------------------------
*/
func bl31_entrypoint
/* ---------------------------------------------
* BL2 has populated x0 with a pointer to a 'bl31_tf_params'
* structure & x1 with a pointer to platform specific structure
* ---------------------------------------------
*/
mov x20, x0
mov x21, x1
/* ---------------------------------------------
* Set the exception vector to something sane.
* ---------------------------------------------
*/
adr x1, early_exceptions
msr vbar_el3, x1
/* ---------------------------------------------------------------------
* The initial state of the Architectural feature trap register
* (CPTR_EL3) is unknown and it must be set to a known state. All
* feature traps are disabled. Some bits in this register are marked as
* Reserved and should not be modified.
*
* CPTR_EL3.TCPAC: This causes a direct access to the CPACR_EL1 from EL1
* or the CPTR_EL2 from EL2 to trap to EL3 unless it is trapped at EL2.
* CPTR_EL3.TTA: This causes access to the Trace functionality to trap
* to EL3 when executed from EL0, EL1, EL2, or EL3. If system register
* access to trace functionality is not supported, this bit is RES0.
* CPTR_EL3.TFP: This causes instructions that access the registers
* associated with Floating Point and Advanced SIMD execution to trap
* to EL3 when executed from any exception level, unless trapped to EL1
* or EL2.
* ---------------------------------------------------------------------
*/
mrs x1, cptr_el3
bic w1, w1, #TCPAC_BIT
bic w1, w1, #TTA_BIT
bic w1, w1, #TFP_BIT
msr cptr_el3, x1
/* ---------------------------------------------
* Enable the instruction cache.
* ---------------------------------------------
*/
mrs x1, sctlr_el3
orr x1, x1, #SCTLR_I_BIT
msr sctlr_el3, x1
isb
/* ---------------------------------------------
* This is BL31 which is expected to be executed
* only by the primary cpu (at least for now).
* So, make sure no secondary has lost its way.
* ---------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_is_primary_cpu
cbz x0, _panic
/* ---------------------------------------------
* Zero out NOBITS sections. There are 2 of them:
* - the .bss section;
* - the coherent memory section.
* ---------------------------------------------
*/
ldr x0, =__BSS_START__
ldr x1, =__BSS_SIZE__
bl zeromem16
ldr x0, =__COHERENT_RAM_START__
ldr x1, =__COHERENT_RAM_UNALIGNED_SIZE__
bl zeromem16
/* ---------------------------------------------
* Use SP_EL0 for the C runtime stack.
* ---------------------------------------------
*/
msr spsel, #0
/* --------------------------------------------
* Give ourselves a small coherent stack to
* ease the pain of initializing the MMU
* --------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_set_coherent_stack
/* ---------------------------------------------
* Perform platform specific early arch. setup
* ---------------------------------------------
*/
mov x0, x20
mov x1, x21
bl bl31_early_platform_setup
bl bl31_plat_arch_setup
/* ---------------------------------------------
* Give ourselves a stack allocated in Normal
* -IS-WBWA memory
* ---------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_set_stack
/* ---------------------------------------------
* Jump to main function.
* ---------------------------------------------
*/
bl bl31_main
b el3_exit
_panic:
wfi
b _panic