• Sandrine Bailleux's avatar
    Define frequency of system counter in platform code · a5355358
    Sandrine Bailleux authored
    BL3-1 architecture setup code programs the system counter frequency
    into the CNTFRQ_EL0 register. This frequency is defined by the
    platform, though. This patch introduces a new platform hook that
    the architecture setup code can call to retrieve this information.
    In the ARM FVP port, this returns the first entry of the frequency
    modes table from the memory mapped generic timer.
    
    All system counter setup code has been removed from BL1 as some
    platforms may not have initialized the system counters at this stage.
    The platform specific settings done exclusively in BL1 have been moved
    to BL3-1. In the ARM FVP port, this consists in enabling and
    initializing the System level generic timer. Also, the frequency change
    request in the counter control register has been set to 0 to make it
    explicit it's using the base frequency. The CNTCR_FCREQ() macro has been
    fixed in this context to give an entry number rather than a bitmask.
    
    In future, when support for firmware ...
    a5355358
plat_common.c 8.14 KB
/*
 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <assert.h>
#include <arch_helpers.h>
#include "debug.h"
#include <platform.h>
#include <xlat_tables.h>

unsigned char platform_normal_stacks[PLATFORM_STACK_SIZE][PLATFORM_CORE_COUNT]
__attribute__ ((aligned(PLATFORM_CACHE_LINE_SIZE),
		section("tzfw_normal_stacks")));

/*******************************************************************************
 * This array holds the characteristics of the differences between the three
 * FVP platforms (Base, A53_A57 & Foundation). It will be populated during cold
 * boot at each boot stage by the primary before enabling the MMU (to allow cci
 * configuration) & used thereafter. Each BL will have its own copy to allow
 * independent operation.
 ******************************************************************************/
static unsigned long platform_config[CONFIG_LIMIT];

/*******************************************************************************
 * Enable the MMU assuming that the pagetables have already been created
 *******************************************************************************/
void enable_mmu()
{
	unsigned long mair, tcr, ttbr, sctlr;
	unsigned long current_el = read_current_el();

	/* Set the attributes in the right indices of the MAIR */
	mair = MAIR_ATTR_SET(ATTR_DEVICE, ATTR_DEVICE_INDEX);
	mair |= MAIR_ATTR_SET(ATTR_IWBWA_OWBWA_NTR,
				  ATTR_IWBWA_OWBWA_NTR_INDEX);
	write_mair(mair);

	/*
	 * Set TCR bits as well. Inner & outer WBWA & shareable + T0SZ = 32
	 */
	tcr = TCR_SH_INNER_SHAREABLE | TCR_RGN_OUTER_WBA |
		  TCR_RGN_INNER_WBA | TCR_T0SZ_4GB;
	if (GET_EL(current_el) == MODE_EL3) {
		tcr |= TCR_EL3_RES1;
		/* Invalidate EL3 TLBs */
		tlbialle3();
	} else {
		/* Invalidate EL1 TLBs */
		tlbivmalle1();
	}

	write_tcr(tcr);

	/* Set TTBR bits as well */
	ttbr = (unsigned long) l1_xlation_table;
	write_ttbr0(ttbr);

	sctlr = read_sctlr();
	sctlr |= SCTLR_WXN_BIT | SCTLR_M_BIT | SCTLR_I_BIT;
	sctlr |= SCTLR_A_BIT | SCTLR_C_BIT;
	write_sctlr(sctlr);

	return;
}

void disable_mmu(void)
{
	/* Zero out the MMU related registers */
	write_mair(0);
	write_tcr(0);
	write_ttbr0(0);
	write_sctlr(0);

	/* Flush the caches */
	dcsw_op_all(DCCISW);

	return;
}

/*
 * Table of regions to map using the MMU.
 * This doesn't include TZRAM as the 'mem_layout' argument passed to to
 * configure_mmu() will give the available subset of that,
 */
const mmap_region mmap[] = {
	{ TZROM_BASE,	TZROM_SIZE,	MT_MEMORY | MT_RO | MT_SECURE },
	{ TZDRAM_BASE,	TZDRAM_SIZE,	MT_MEMORY | MT_RW | MT_SECURE },
	{ FLASH0_BASE,	FLASH0_SIZE,	MT_MEMORY | MT_RO | MT_SECURE },
	{ FLASH1_BASE,	FLASH1_SIZE,	MT_MEMORY | MT_RO | MT_SECURE },
	{ VRAM_BASE,	VRAM_SIZE,	MT_MEMORY | MT_RW | MT_SECURE },
	{ DEVICE0_BASE,	DEVICE0_SIZE,	MT_DEVICE | MT_RW | MT_SECURE },
	{ NSRAM_BASE,	NSRAM_SIZE,	MT_MEMORY | MT_RW | MT_NS },
	{ DEVICE1_BASE,	DEVICE1_SIZE,	MT_DEVICE | MT_RW | MT_SECURE },
	/* 2nd GB as device for now...*/
	{ 0x40000000,	0x40000000,	MT_DEVICE | MT_RW | MT_SECURE },
	{ DRAM_BASE,	DRAM_SIZE,	MT_MEMORY | MT_RW | MT_NS },
	{0}
};

/*******************************************************************************
 * Setup the pagetables as per the platform memory map & initialize the mmu
 *******************************************************************************/
void configure_mmu(meminfo *mem_layout,
		   unsigned long ro_start,
		   unsigned long ro_limit,
		   unsigned long coh_start,
		   unsigned long coh_limit)
{
	mmap_add_region(mem_layout->total_base, mem_layout->total_size,
				MT_MEMORY | MT_RW | MT_SECURE);
	mmap_add_region(ro_start, ro_limit - ro_start,
				MT_MEMORY | MT_RO | MT_SECURE);
	mmap_add_region(coh_start, coh_limit - coh_start,
				MT_DEVICE | MT_RW | MT_SECURE);

	mmap_add(mmap);

	init_xlat_tables();

	enable_mmu();
	return;
}

/* Simple routine which returns a configuration variable value */
unsigned long platform_get_cfgvar(unsigned int var_id)
{
	assert(var_id < CONFIG_LIMIT);
	return platform_config[var_id];
}

/*******************************************************************************
 * A single boot loader stack is expected to work on both the Foundation FVP
 * models and the two flavours of the Base FVP models (AEMv8 & Cortex). The
 * SYS_ID register provides a mechanism for detecting the differences between
 * these platforms. This information is stored in a per-BL array to allow the
 * code to take the correct path.Per BL platform configuration.
 ******************************************************************************/
int platform_config_setup(void)
{
	unsigned int rev, hbi, bld, arch, sys_id, midr_pn;

	sys_id = mmio_read_32(VE_SYSREGS_BASE + V2M_SYS_ID);
	rev = (sys_id >> SYS_ID_REV_SHIFT) & SYS_ID_REV_MASK;
	hbi = (sys_id >> SYS_ID_HBI_SHIFT) & SYS_ID_HBI_MASK;
	bld = (sys_id >> SYS_ID_BLD_SHIFT) & SYS_ID_BLD_MASK;
	arch = (sys_id >> SYS_ID_ARCH_SHIFT) & SYS_ID_ARCH_MASK;

	if ((rev != REV_FVP) || (arch != ARCH_MODEL))
		panic();

	/*
	 * The build field in the SYS_ID tells which variant of the GIC
	 * memory is implemented by the model.
	 */
	switch (bld) {
	case BLD_GIC_VE_MMAP:
		platform_config[CONFIG_GICD_ADDR] = VE_GICD_BASE;
		platform_config[CONFIG_GICC_ADDR] = VE_GICC_BASE;
		platform_config[CONFIG_GICH_ADDR] = VE_GICH_BASE;
		platform_config[CONFIG_GICV_ADDR] = VE_GICV_BASE;
		break;
	case BLD_GIC_A53A57_MMAP:
		platform_config[CONFIG_GICD_ADDR] = BASE_GICD_BASE;
		platform_config[CONFIG_GICC_ADDR] = BASE_GICC_BASE;
		platform_config[CONFIG_GICH_ADDR] = BASE_GICH_BASE;
		platform_config[CONFIG_GICV_ADDR] = BASE_GICV_BASE;
		break;
	default:
		assert(0);
	}

	/*
	 * The hbi field in the SYS_ID is 0x020 for the Base FVP & 0x010
	 * for the Foundation FVP.
	 */
	switch (hbi) {
	case HBI_FOUNDATION:
		platform_config[CONFIG_MAX_AFF0] = 4;
		platform_config[CONFIG_MAX_AFF1] = 1;
		platform_config[CONFIG_CPU_SETUP] = 0;
		platform_config[CONFIG_BASE_MMAP] = 0;
		platform_config[CONFIG_HAS_CCI] = 0;
		break;
	case HBI_FVP_BASE:
		midr_pn = (read_midr() >> MIDR_PN_SHIFT) & MIDR_PN_MASK;
		if ((midr_pn == MIDR_PN_A57) || (midr_pn == MIDR_PN_A53))
			platform_config[CONFIG_CPU_SETUP] = 1;
		else
			platform_config[CONFIG_CPU_SETUP] = 0;

		platform_config[CONFIG_MAX_AFF0] = 4;
		platform_config[CONFIG_MAX_AFF1] = 2;
		platform_config[CONFIG_BASE_MMAP] = 1;
		platform_config[CONFIG_HAS_CCI] = 1;
		break;
	default:
		assert(0);
	}

	return 0;
}

unsigned long plat_get_ns_image_entrypoint(void)
{
	return NS_IMAGE_OFFSET;
}

uint64_t plat_get_syscnt_freq(void)
{
	uint64_t counter_base_frequency;

	/* Read the frequency from Frequency modes table */
	counter_base_frequency = mmio_read_32(SYS_CNTCTL_BASE + CNTFID_OFF);

	/* The first entry of the frequency modes table must not be 0 */
	assert(counter_base_frequency != 0);

	return counter_base_frequency;
}