• Vikram Kanigiri's avatar
    Add support for BL3-1 as a reset vector · d846780e
    Vikram Kanigiri authored
    This change adds optional reset vector support to BL3-1
    which means BL3-1 entry point can detect cold/warm boot,
    initialise primary cpu, set up cci and mail box.
    
    When using BL3-1 as a reset vector it is assumed that
    the BL3-1 platform code can determine the location of
    the BL3-2 images, or load them as there are no parameters
    that can be passed to BL3-1 at reset.
    
    It also fixes the incorrect initialisation of mailbox
    registers on the FVP platform
    
    This feature can be enabled by building the code with
    make variable RESET_TO_BL31 set as 1
    
    Fixes ARM-software/TF-issues#133
    Fixes ARM-software/TF-issues#20
    
    Change-Id: I4e23939b1c518614b899f549f1e8d412538ee570
    d846780e
plat_pm.c 12.5 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408
/*
 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <arch_helpers.h>
#include <assert.h>
#include <bakery_lock.h>
#include <cci400.h>
#include <mmio.h>
#include <platform.h>
#include <psci.h>
#include "drivers/pwrc/fvp_pwrc.h"

/*******************************************************************************
 * FVP handler called when an affinity instance is about to enter standby.
 ******************************************************************************/
int fvp_affinst_standby(unsigned int power_state)
{
	unsigned int target_afflvl;

	/* Sanity check the requested state */
	target_afflvl = psci_get_pstate_afflvl(power_state);

	/*
	 * It's possible to enter standby only on affinity level 0 i.e. a cpu
	 * on the FVP. Ignore any other affinity level.
	 */
	if (target_afflvl != MPIDR_AFFLVL0)
		return PSCI_E_INVALID_PARAMS;

	/*
	 * Enter standby state
	 * dsb is good practice before using wfi to enter low power states
	 */
	dsb();
	wfi();

	return PSCI_E_SUCCESS;
}

/*******************************************************************************
 * FVP handler called when an affinity instance is about to be turned on. The
 * level and mpidr determine the affinity instance.
 ******************************************************************************/
int fvp_affinst_on(unsigned long mpidr,
		   unsigned long sec_entrypoint,
		   unsigned long ns_entrypoint,
		   unsigned int afflvl,
		   unsigned int state)
{
	int rc = PSCI_E_SUCCESS;
	unsigned long linear_id;
	mailbox_t *fvp_mboxes;
	unsigned int psysr;

	/*
	 * It's possible to turn on only affinity level 0 i.e. a cpu
	 * on the FVP. Ignore any other affinity level.
	 */
	if (afflvl != MPIDR_AFFLVL0)
		goto exit;

	/*
	 * Ensure that we do not cancel an inflight power off request
	 * for the target cpu. That would leave it in a zombie wfi.
	 * Wait for it to power off, program the jump address for the
	 * target cpu and then program the power controller to turn
	 * that cpu on
	 */
	do {
		psysr = fvp_pwrc_read_psysr(mpidr);
	} while (psysr & PSYSR_AFF_L0);

	linear_id = platform_get_core_pos(mpidr);
	fvp_mboxes = (mailbox_t *) (TZDRAM_BASE + MBOX_OFF);
	fvp_mboxes[linear_id].value = sec_entrypoint;
	flush_dcache_range((unsigned long) &fvp_mboxes[linear_id],
			   sizeof(unsigned long));

	fvp_pwrc_write_pponr(mpidr);

exit:
	return rc;
}

/*******************************************************************************
 * FVP handler called when an affinity instance is about to be turned off. The
 * level and mpidr determine the affinity instance. The 'state' arg. allows the
 * platform to decide whether the cluster is being turned off and take apt
 * actions.
 *
 * CAUTION: This function is called with coherent stacks so that caches can be
 * turned off, flushed and coherency disabled. There is no guarantee that caches
 * will remain turned on across calls to this function as each affinity level is
 * dealt with. So do not write & read global variables across calls. It will be
 * wise to do flush a write to the global to prevent unpredictable results.
 ******************************************************************************/
int fvp_affinst_off(unsigned long mpidr,
		    unsigned int afflvl,
		    unsigned int state)
{
	int rc = PSCI_E_SUCCESS;
	unsigned int gicc_base, ectlr;
	unsigned long cpu_setup, cci_setup;

	switch (afflvl) {
	case MPIDR_AFFLVL1:
		if (state == PSCI_STATE_OFF) {
			/*
			 * Disable coherency if this cluster is to be
			 * turned off
			 */
			cci_setup = platform_get_cfgvar(CONFIG_HAS_CCI);
			if (cci_setup) {
				cci_disable_coherency(mpidr);
			}

			/*
			 * Program the power controller to turn the
			 * cluster off
			 */
			fvp_pwrc_write_pcoffr(mpidr);

		}
		break;

	case MPIDR_AFFLVL0:
		if (state == PSCI_STATE_OFF) {

			/*
			 * Take this cpu out of intra-cluster coherency if
			 * the FVP flavour supports the SMP bit.
			 */
			cpu_setup = platform_get_cfgvar(CONFIG_CPU_SETUP);
			if (cpu_setup) {
				ectlr = read_cpuectlr();
				ectlr &= ~CPUECTLR_SMP_BIT;
				write_cpuectlr(ectlr);
			}

			/*
			 * Prevent interrupts from spuriously waking up
			 * this cpu
			 */
			gicc_base = platform_get_cfgvar(CONFIG_GICC_ADDR);
			gic_cpuif_deactivate(gicc_base);

			/*
			 * Program the power controller to power this
			 * cpu off
			 */
			fvp_pwrc_write_ppoffr(mpidr);
		}
		break;

	default:
		assert(0);
	}

	return rc;
}

/*******************************************************************************
 * FVP handler called when an affinity instance is about to be suspended. The
 * level and mpidr determine the affinity instance. The 'state' arg. allows the
 * platform to decide whether the cluster is being turned off and take apt
 * actions.
 *
 * CAUTION: This function is called with coherent stacks so that caches can be
 * turned off, flushed and coherency disabled. There is no guarantee that caches
 * will remain turned on across calls to this function as each affinity level is
 * dealt with. So do not write & read global variables across calls. It will be
 * wise to do flush a write to the global to prevent unpredictable results.
 ******************************************************************************/
int fvp_affinst_suspend(unsigned long mpidr,
			unsigned long sec_entrypoint,
			unsigned long ns_entrypoint,
			unsigned int afflvl,
			unsigned int state)
{
	int rc = PSCI_E_SUCCESS;
	unsigned int gicc_base, ectlr;
	unsigned long cpu_setup, cci_setup, linear_id;
	mailbox_t *fvp_mboxes;

	switch (afflvl) {
	case MPIDR_AFFLVL1:
		if (state == PSCI_STATE_OFF) {
			/*
			 * Disable coherency if this cluster is to be
			 * turned off
			 */
			cci_setup = platform_get_cfgvar(CONFIG_HAS_CCI);
			if (cci_setup) {
				cci_disable_coherency(mpidr);
			}

			/*
			 * Program the power controller to turn the
			 * cluster off
			 */
			fvp_pwrc_write_pcoffr(mpidr);

		}
		break;

	case MPIDR_AFFLVL0:
		if (state == PSCI_STATE_OFF) {
			/*
			 * Take this cpu out of intra-cluster coherency if
			 * the FVP flavour supports the SMP bit.
			 */
			cpu_setup = platform_get_cfgvar(CONFIG_CPU_SETUP);
			if (cpu_setup) {
				ectlr = read_cpuectlr();
				ectlr &= ~CPUECTLR_SMP_BIT;
				write_cpuectlr(ectlr);
			}

			/* Program the jump address for the target cpu */
			linear_id = platform_get_core_pos(mpidr);
			fvp_mboxes = (mailbox_t *) (TZDRAM_BASE + MBOX_OFF);
			fvp_mboxes[linear_id].value = sec_entrypoint;
			flush_dcache_range((unsigned long) &fvp_mboxes[linear_id],
					   sizeof(unsigned long));

			/*
			 * Prevent interrupts from spuriously waking up
			 * this cpu
			 */
			gicc_base = platform_get_cfgvar(CONFIG_GICC_ADDR);
			gic_cpuif_deactivate(gicc_base);

			/*
			 * Program the power controller to power this
			 * cpu off and enable wakeup interrupts.
			 */
			fvp_pwrc_set_wen(mpidr);
			fvp_pwrc_write_ppoffr(mpidr);
		}
		break;

	default:
		assert(0);
	}

	return rc;
}

/*******************************************************************************
 * FVP handler called when an affinity instance has just been powered on after
 * being turned off earlier. The level and mpidr determine the affinity
 * instance. The 'state' arg. allows the platform to decide whether the cluster
 * was turned off prior to wakeup and do what's necessary to setup it up
 * correctly.
 ******************************************************************************/
int fvp_affinst_on_finish(unsigned long mpidr,
			  unsigned int afflvl,
			  unsigned int state)
{
	int rc = PSCI_E_SUCCESS;
	unsigned long linear_id, cpu_setup;
	mailbox_t *fvp_mboxes;
	unsigned int gicd_base, gicc_base, reg_val, ectlr;

	switch (afflvl) {

	case MPIDR_AFFLVL1:
		/* Enable coherency if this cluster was off */
		if (state == PSCI_STATE_OFF) {

			/*
			 * This CPU might have woken up whilst the
			 * cluster was attempting to power down. In
			 * this case the FVP power controller will
			 * have a pending cluster power off request
			 * which needs to be cleared by writing to the
			 * PPONR register. This prevents the power
			 * controller from interpreting a subsequent
			 * entry of this cpu into a simple wfi as a
			 * power down request.
			 */
			fvp_pwrc_write_pponr(mpidr);

			plat_cci_setup();
		}
		break;

	case MPIDR_AFFLVL0:
		/*
		 * Ignore the state passed for a cpu. It could only have
		 * been off if we are here.
		 */

		/*
		 * Turn on intra-cluster coherency if the FVP flavour supports
		 * it.
		 */
		cpu_setup = platform_get_cfgvar(CONFIG_CPU_SETUP);
		if (cpu_setup) {
			ectlr = read_cpuectlr();
			ectlr |= CPUECTLR_SMP_BIT;
			write_cpuectlr(ectlr);
		}

		/*
		 * Clear PWKUPR.WEN bit to ensure interrupts do not interfere
		 * with a cpu power down unless the bit is set again
		 */
		fvp_pwrc_clr_wen(mpidr);

		/* Zero the jump address in the mailbox for this cpu */
		fvp_mboxes = (mailbox_t *) (TZDRAM_BASE + MBOX_OFF);
		linear_id = platform_get_core_pos(mpidr);
		fvp_mboxes[linear_id].value = 0;
		flush_dcache_range((unsigned long) &fvp_mboxes[linear_id],
				   sizeof(unsigned long));

		gicd_base = platform_get_cfgvar(CONFIG_GICD_ADDR);
		gicc_base = platform_get_cfgvar(CONFIG_GICC_ADDR);

		/* Enable the gic cpu interface */
		gic_cpuif_setup(gicc_base);

		/* TODO: This setup is needed only after a cold boot */
		gic_pcpu_distif_setup(gicd_base);

		/* Allow access to the System counter timer module */
		reg_val = (1 << CNTACR_RPCT_SHIFT) | (1 << CNTACR_RVCT_SHIFT);
		reg_val |= (1 << CNTACR_RFRQ_SHIFT) | (1 << CNTACR_RVOFF_SHIFT);
		reg_val |= (1 << CNTACR_RWVT_SHIFT) | (1 << CNTACR_RWPT_SHIFT);
		mmio_write_32(SYS_TIMCTL_BASE + CNTACR_BASE(0), reg_val);
		mmio_write_32(SYS_TIMCTL_BASE + CNTACR_BASE(1), reg_val);

		reg_val = (1 << CNTNSAR_NS_SHIFT(0)) |
			(1 << CNTNSAR_NS_SHIFT(1));
		mmio_write_32(SYS_TIMCTL_BASE + CNTNSAR, reg_val);

		break;

	default:
		assert(0);
	}

	return rc;
}

/*******************************************************************************
 * FVP handler called when an affinity instance has just been powered on after
 * having been suspended earlier. The level and mpidr determine the affinity
 * instance.
 * TODO: At the moment we reuse the on finisher and reinitialize the secure
 * context. Need to implement a separate suspend finisher.
 ******************************************************************************/
int fvp_affinst_suspend_finish(unsigned long mpidr,
			       unsigned int afflvl,
			       unsigned int state)
{
	return fvp_affinst_on_finish(mpidr, afflvl, state);
}


/*******************************************************************************
 * Export the platform handlers to enable psci to invoke them
 ******************************************************************************/
static const plat_pm_ops_t fvp_plat_pm_ops = {
	fvp_affinst_standby,
	fvp_affinst_on,
	fvp_affinst_off,
	fvp_affinst_suspend,
	fvp_affinst_on_finish,
	fvp_affinst_suspend_finish,
};

/*******************************************************************************
 * Export the platform specific power ops & initialize the fvp power controller
 ******************************************************************************/
int platform_setup_pm(const plat_pm_ops_t **plat_ops)
{
	*plat_ops = &fvp_plat_pm_ops;
	return 0;
}