Skip to content

GitLab

"vscode:/vscode.git/clone" did not exist on "4b7038f8f46f842df02acdce9b8fb21f6f2b3050"
Commit 408b79b8 authored by danh-arm's avatar danh-arm
Browse files

Merge pull request #233 from jcastillo-arm/jc/tf-issues/254 

Juno: Add support for image overlaying in Trusted SRAM
parents 8a6af12d 1217d28d
Hide whitespace changes
Inline Side-by-side
docs/firmware-design.md
View file @ 408b79b8
......@@ -1270,9 +1270,40 @@ diagrams.
Loading the TSP image in Trusted DRAM doesn't change the memory layout of the
other boot loader images in Trusted SRAM.
#### Memory layout on Juno ARM development platform
**TSP in Trusted SRAM (default option):**
The following list describes the memory layout on Juno:
* Trusted SRAM at 0x04000000 contains the MHU page, BL1 r/w section, BL2
image, BL3-1 image and, optionally, the BL3-2 image.
* The MHU 4 KB page is used as communication channel between SCP and AP. It
also contains the entrypoint mailboxes for the AP. Mailboxes are stored in
the first 128 bytes of the MHU page.
* BL1 resides in flash memory at address `0x0BEC0000`. Its read-write data
section is relocated to the top of the Trusted SRAM at runtime.
* BL3-1 is loaded at the top of the Trusted SRAM, such that its NOBITS
sections will overwrite BL1 R/W data. This implies that BL1 global variables
will remain valid only until execution reaches the BL3-1 entry point during
a cold boot.
* BL2 is loaded below BL3-1.
* BL3-0 is loaded temporarily into the BL3-1 memory region and transfered to
the SCP before being overwritten by BL3-1.
* The BL3-2 image is optional and can be loaded into one of these two
locations: Trusted SRAM (right after the MHU page) or DRAM (14 MB starting
at 0xFF000000 and secured by the TrustZone controller). When loaded into
Trusted SRAM, its NOBITS sections are allowed to overlap BL2.
Depending on the location of the BL3-2 image, it will result in different memory
maps, illustrated by the following diagrams.
**BL3-2 in Trusted SRAM (default option):**
Flash0
0x0C000000 +----------+
......@@ -1281,30 +1312,30 @@ other boot loader images in Trusted SRAM.
| BL1 (ro) |
0x0BEC0000 |----------|
: :
| Bypass |
0x08000000 +----------+
Trusted SRAM
0x04040000 +----------+
| BL2 | BL3-1 is loaded
0x04033000 |----------| after BL3-0 has
| BL3-2 | been sent to SCP
0x04023000 |----------| ------------------
| BL3-0 | <<<<<<<<<<<<< | BL3-1 |
0x04009000 |----------| ------------------
| BL1 (rw) |
0x04001000 |----------|
0x08000000 +----------+ BL3-1 is loaded
after BL3-0 has
Trusted SRAM been sent to SCP
0x04040000 +----------+ loaded by BL2 ------------------
| BL1 (rw) | <<<<<<<<<<<<< | BL3-1 NOBITS |
|----------| <<<<<<<<<<<<< |----------------|
| BL3-0 | <<<<<<<<<<<<< | BL3-1 PROGBITS |
|----------| ------------------
| BL2 | <<<<<<<<<<<<< | BL3-2 NOBITS |
|----------| <<<<<<<<<<<<< |----------------|
| | <<<<<<<<<<<<< | BL3-2 PROGBITS |
0x04001000 +----------+ ------------------
| MHU |
0x04000000 +----------+
**TSP in the secure region of DRAM:**
**BL3-2 in the secure region of DRAM:**
DRAM
0xFFE00000 +----------+
| BL3-2 |
| BL3-2 | (secure)
0xFF000000 |----------|
| |
: :
: : (non-secure)
| |
0x80000000 +----------+
......@@ -1315,29 +1346,23 @@ other boot loader images in Trusted SRAM.
| BL1 (ro) |
0x0BEC0000 |----------|
: :
| Bypass |
0x08000000 +----------+
Trusted SRAM
0x04040000 +----------+
| BL2 | BL3-1 is loaded
0x04033000 |----------| after BL3-0 has
| | been sent to SCP
0x04023000 |----------| ------------------
| BL3-0 | <<<<<<<<<<<<< | BL3-1 |
0x04009000 |----------| ------------------
| BL1 (rw) |
0x04001000 |----------|
0x08000000 +----------+ BL3-1 is loaded
after BL3-0 has
Trusted SRAM been sent to SCP
0x04040000 +----------+ loaded by BL2 ------------------
| BL1 (rw) | <<<<<<<<<<<<< | BL3-1 NOBITS |
|----------| <<<<<<<<<<<<< |----------------|
| BL3-0 | <<<<<<<<<<<<< | BL3-1 PROGBITS |
|----------| ------------------
| BL2 |
|----------|
| |
0x04001000 +----------+
| MHU |
0x04000000 +----------+
The Message Handling Unit (MHU) page contains the entrypoint mailboxes and a
shared memory area. This shared memory is used as a communication channel
between the AP and the SCP.
BL1 code starts at `0x0BEC0000`. The BL1 data section is copied to trusted SRAM
at `0x04001000`, right after the MHU page. Entrypoint mailboxes are stored in
the first 128 bytes of the MHU page.
Loading the BL3-2 image in DRAM doesn't change the memory layout of the other
images in Trusted SRAM.
9. Firmware Image Package (FIP)
......
plat/juno/include/platform_def.h
View file @ 408b79b8
......@@ -75,24 +75,6 @@
#define MAX_IO_DEVICES 3
#define MAX_IO_HANDLES 4
/*******************************************************************************
* Platform memory map related constants
******************************************************************************/
#define FLASH_BASE 0x08000000
#define FLASH_SIZE 0x04000000
/* Bypass offset from start of NOR flash */
#define BL1_ROM_BYPASS_OFFSET 0x03EC0000
#ifndef TZROM_BASE
/* Use the bypass address */
#define TZROM_BASE FLASH_BASE + BL1_ROM_BYPASS_OFFSET
#endif
#define TZROM_SIZE 0x00010000
#define TZRAM_BASE 0x04001000
#define TZRAM_SIZE 0x0003F000
/*******************************************************************************
* BL1 specific defines.
* BL1 RW data is relocated from ROM to RAM at runtime so we need 2 base
......@@ -100,14 +82,23 @@
******************************************************************************/
#define BL1_RO_BASE TZROM_BASE
#define BL1_RO_LIMIT (TZROM_BASE + TZROM_SIZE)
#define BL1_RW_BASE TZRAM_BASE
#define BL1_RW_LIMIT BL31_BASE
/*
* Put BL1 RW at the top of the Trusted SRAM. BL1_RW_BASE is calculated using
* the current BL1 RW debug size plus a little space for growth.
*/
#define BL1_RW_BASE (TZRAM_BASE + TZRAM_SIZE - 0x6000)
#define BL1_RW_LIMIT (TZRAM_BASE + TZRAM_SIZE)
/*******************************************************************************
* BL2 specific defines.
******************************************************************************/
#define BL2_BASE (TZRAM_BASE + TZRAM_SIZE - 0xd000)
#define BL2_LIMIT (TZRAM_BASE + TZRAM_SIZE)
/*
* Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
* size plus a little space for growth.
*/
#define BL2_BASE (BL31_BASE - 0xC000)
#define BL2_LIMIT BL31_BASE
/*******************************************************************************
* Load address of BL3-0 in the Juno port
......@@ -119,8 +110,13 @@
/*******************************************************************************
* BL3-1 specific defines.
******************************************************************************/
#define BL31_BASE (TZRAM_BASE + 0x8000)
#define BL31_LIMIT BL32_BASE
/*
* Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
* current BL3-1 debug size plus a little space for growth.
*/
#define BL31_BASE (TZRAM_BASE + TZRAM_SIZE - 0x1D000)
#define BL31_PROGBITS_LIMIT BL1_RW_BASE
#define BL31_LIMIT (TZRAM_BASE + TZRAM_SIZE)
/*******************************************************************************
* BL3-2 specific defines.
......@@ -128,8 +124,9 @@
#if (PLAT_TSP_LOCATION_ID == PLAT_TRUSTED_SRAM_ID)
# define TSP_SEC_MEM_BASE TZRAM_BASE
# define TSP_SEC_MEM_SIZE TZRAM_SIZE
# define BL32_BASE (TZRAM_BASE + TZRAM_SIZE - 0x1d000)
# define BL32_LIMIT BL2_BASE
# define BL32_BASE TZRAM_BASE
# define BL32_LIMIT BL31_BASE
# define BL32_PROGBITS_LIMIT BL2_BASE
#elif (PLAT_TSP_LOCATION_ID == PLAT_DRAM_ID)
# define TSP_SEC_MEM_BASE DRAM_SEC_BASE
# define TSP_SEC_MEM_SIZE (DRAM_SEC_SIZE - DRAM_SCP_SIZE)
......
plat/juno/juno_def.h
View file @ 408b79b8
......@@ -37,6 +37,21 @@
/*******************************************************************************
* Juno memory map related constants
******************************************************************************/
#define FLASH_BASE 0x08000000
#define FLASH_SIZE 0x04000000
/* Bypass offset from start of NOR flash */
#define BL1_ROM_BYPASS_OFFSET 0x03EC0000
#ifndef TZROM_BASE
/* Use the bypass address */
#define TZROM_BASE FLASH_BASE + BL1_ROM_BYPASS_OFFSET
#endif
#define TZROM_SIZE 0x00010000
#define TZRAM_BASE 0x04001000
#define TZRAM_SIZE 0x0003F000
#define PLAT_TRUSTED_SRAM_ID 0
#define PLAT_DRAM_ID 1
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment