qti/sc7180: Do shutdown handling outside qtiseclib

With an open source SPMI driver we can now remove qtiseclib involvement
in reset and shutdown handling by setting the required registers
directly.

Change-Id: I6bf1db15734048df583daa2a4ee98701c6ece621
Signed-off-by: Julius Werner <jwerner@chromium.org>

plat/qti/common/inc/qti_plat.h

@@ -50,4 +50,7 @@ unsigned int plat_qti_my_cluster_pos(void);
 
 void gic_set_spi_routing(unsigned int id, unsigned int irm, u_register_t mpidr);
 
+void qti_pmic_prepare_reset(void);
+void qti_pmic_prepare_shutdown(void);
+
 #endif /* QTI_PLAT_H */

plat/qti/common/src/pm8998.c

+/*
+ * Copyright (c) 2020, Google LLC. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <drivers/delay_timer.h>
+
+#include <qti_plat.h>
+#include <spmi_arb.h>
+
+/*
+ * This driver implements PON support for PM8998-compatible PMICs. This can
+ * include other part numbers like PM6150.
+ */
+
+#define PON_PS_HOLD_RESET_CTL		0x85a
+#define RESET_TYPE_WARM_RESET		1
+#define RESET_TYPE_SHUTDOWN		4
+
+#define PON_PS_HOLD_RESET_CTL2		0x85b
+#define S2_RESET_EN			BIT(7)
+
+static void configure_ps_hold(uint32_t reset_type)
+{
+	/* QTI recommends disabling reset for 10 cycles before reconfiguring. */
+	spmi_arb_write8(PON_PS_HOLD_RESET_CTL2, 0);
+	mdelay(1);
+
+	spmi_arb_write8(PON_PS_HOLD_RESET_CTL, reset_type);
+	spmi_arb_write8(PON_PS_HOLD_RESET_CTL2, S2_RESET_EN);
+	mdelay(1);
+}
+
+void qti_pmic_prepare_reset(void)
+{
+	configure_ps_hold(RESET_TYPE_WARM_RESET);
+}
+
+void qti_pmic_prepare_shutdown(void)
+{
+	configure_ps_hold(RESET_TYPE_SHUTDOWN);
+}

plat/qti/common/src/qti_pm.c

@@ -9,6 +9,8 @@
 #include <arch_helpers.h>
 #include <bl31/bl31.h>
 #include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
 #include <lib/psci/psci.h>
 
 #include <platform.h>
@@ -204,14 +206,25 @@ __dead2 void qti_domain_power_down_wfi(const psci_power_state_t *target_state)
 	/* We should never reach here */
 }
 
+static __dead2 void assert_ps_hold(void)
+{
+	mmio_write_32(QTI_PS_HOLD_REG, 0);
+	mdelay(1000);
+
+	/* Should be dead before reaching this. */
+	panic();
+}
+
 __dead2 void qti_system_off(void)
 {
-	qtiseclib_psci_system_off();
+	qti_pmic_prepare_shutdown();
+	assert_ps_hold();
 }
 
 __dead2 void qti_system_reset(void)
 {
-	qtiseclib_psci_system_reset();
+	qti_pmic_prepare_reset();
+	assert_ps_hold();
 }
 
 void qti_get_sys_suspend_power_state(psci_power_state_t *req_state)

plat/qti/qtiseclib/inc/qtiseclib_interface.h

@@ -78,10 +78,6 @@ void qtiseclib_psci_cpu_standby(uint8_t pwr_state);
 void qtiseclib_psci_node_power_off(const uint8_t *states);
 void qtiseclib_psci_node_suspend(const uint8_t *states);
 void qtiseclib_psci_node_suspend_finish(const uint8_t *states);
-__attribute__ ((noreturn))
-void qtiseclib_psci_system_off(void);
-__attribute__ ((noreturn))
-void qtiseclib_psci_system_reset(void);
 void qtiseclib_disable_cluster_coherency(uint8_t state);
 
 #endif /* QTISECLIB_INTERFACE_H */

plat/qti/qtiseclib/src/qtiseclib_interface_stub.c

@@ -108,18 +108,6 @@ void qtiseclib_psci_node_suspend_finish(const uint8_t *states)
 {
 }
 
-void qtiseclib_psci_system_off(void)
-{
-	while (1) {
-	};
-}
-
-void qtiseclib_psci_system_reset(void)
-{
-	while (1) {
-	};
-}
-
 void qtiseclib_disable_cluster_coherency(uint8_t state)
 {
 }

plat/qti/sc7180/inc/platform_def.h

@@ -173,4 +173,10 @@
  */
 #define BL31_LIMIT				(BL31_BASE + BL31_SIZE)
 
+/*----------------------------------------------------------------------------*/
+/* AOSS registers */
+/*----------------------------------------------------------------------------*/
+#define QTI_PS_HOLD_REG				0x0C264000
+/*----------------------------------------------------------------------------*/
+
 #endif /* PLATFORM_DEF_H */

plat/qti/sc7180/platform.mk

@@ -51,6 +51,7 @@ QTI_BL31_SOURCES	:=	$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_helpers.S	\
 				$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_kryo4_silver.S	\
 				$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_kryo4_gold.S	\
 				$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_uart_console.S	\
+				$(QTI_PLAT_PATH)/common/src/pm8998.c			\
 				$(QTI_PLAT_PATH)/common/src/qti_stack_protector.c	\
 				$(QTI_PLAT_PATH)/common/src/qti_common.c		\
 				$(QTI_PLAT_PATH)/common/src/qti_bl31_setup.c		\
@@ -60,6 +61,7 @@ QTI_BL31_SOURCES	:=	$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_helpers.S	\
 				$(QTI_PLAT_PATH)/common/src/qti_topology.c		\
 				$(QTI_PLAT_PATH)/common/src/qti_pm.c			\
 				$(QTI_PLAT_PATH)/common/src/qti_rng.c			\
+				$(QTI_PLAT_PATH)/common/src/spmi_arb.c			\
 				$(QTI_PLAT_PATH)/qtiseclib/src/qtiseclib_cb_interface.c	\