Skip to content

GitLab

Commit 60e19f57 authored by Antonio Nino Diaz's avatar Antonio Nino Diaz
Browse files

plat/arm: Migrate to new interfaces 



- Remove references to removed build options.
- Remove support for legacy GIC driver.
- Remove support for LOAD_IMAGE_V2=0.

Change-Id: I72f8c05620bdf4a682765e6e53e2c04ca749a3d5
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
parent fe199e3b
Hide whitespace changes
Inline Side-by-side
include/plat/arm/common/arm_def.h
View file @ 60e19f57
......@@ -165,21 +165,6 @@
#define ARM_IRQ_SEC_SGI_6 14
#define ARM_IRQ_SEC_SGI_7 15
/*
* List of secure interrupts are deprecated, but are retained only to support
* legacy configurations.
*/
#define ARM_G1S_IRQS ARM_IRQ_SEC_PHY_TIMER, \
ARM_IRQ_SEC_SGI_1, \
ARM_IRQ_SEC_SGI_2, \
ARM_IRQ_SEC_SGI_3, \
ARM_IRQ_SEC_SGI_4, \
ARM_IRQ_SEC_SGI_5, \
ARM_IRQ_SEC_SGI_7
#define ARM_G0_IRQS ARM_IRQ_SEC_SGI_0, \
ARM_IRQ_SEC_SGI_6
/*
* Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3
* terminology. On a GICv2 system or mode, the lists will be merged and treated
......
include/plat/arm/common/plat_arm.h
View file @ 60e19f57
......@@ -17,7 +17,6 @@
/*******************************************************************************
* Forward declarations
******************************************************************************/
struct bl31_params;
struct meminfo;
struct image_info;
struct bl_params;
......@@ -197,13 +196,8 @@ void arm_bl2u_platform_setup(void);
void arm_bl2u_plat_arch_setup(void);
/* BL31 utility functions */
#if LOAD_IMAGE_V2
void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
uintptr_t hw_config, void *plat_params_from_bl2);
#else
void arm_bl31_early_platform_setup(struct bl31_params *from_bl2, uintptr_t soc_fw_config,
uintptr_t hw_config, void *plat_params_from_bl2);
#endif /* LOAD_IMAGE_V2 */
void arm_bl31_platform_setup(void);
void arm_bl31_plat_runtime_setup(void);
void arm_bl31_plat_arch_setup(void);
......@@ -252,13 +246,11 @@ void plat_arm_error_handler(int err);
unsigned int plat_arm_get_cpu_pe_count(u_register_t mpidr);
#endif
#if LOAD_IMAGE_V2
/*
* This function is called after loading SCP_BL2 image and it is used to perform
* any platform-specific actions required to handle the SCP firmware.
*/
int plat_arm_bl2_handle_scp_bl2(struct image_info *scp_bl2_image_info);
#endif
/*
* Optional functions required in ARM standard platforms
......
plat/arm/board/fvp/fvp_common.c
View file @ 60e19f57
......@@ -24,7 +24,6 @@
/* Defines for GIC Driver build time selection */
#define FVP_GICV2 1
#define FVP_GICV3 2
#define FVP_GICV3_LEGACY 3
/*******************************************************************************
* arm_config holds the characteristics of the differences between the three FVP
......@@ -92,9 +91,9 @@ const mmap_region_t plat_arm_mmap[] = {
#if TRUSTED_BOARD_BOOT
/* To access the Root of Trust Public Key registers. */
MAP_DEVICE2,
#if LOAD_IMAGE_V2 && !BL2_AT_EL3
#if !BL2_AT_EL3
ARM_MAP_BL1_RW,
#endif /* LOAD_IMAGE_V2 && !BL2_AT_EL3 */
#endif
#endif /* TRUSTED_BOARD_BOOT */
#if ENABLE_SPM
ARM_SP_IMAGE_MMAP,
......@@ -399,7 +398,7 @@ void fvp_interconnect_disable(void)
#endif
}
#if TRUSTED_BOARD_BOOT && LOAD_IMAGE_V2
#if TRUSTED_BOARD_BOOT
int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
{
assert(heap_addr != NULL);
......
plat/arm/board/fvp/include/platform_def.h
View file @ 60e19f57
......@@ -145,12 +145,6 @@
* terminology. On a GICv2 system or mode, the lists will be merged and treated
* as Group 0 interrupts.
*/
#define PLAT_ARM_G1S_IRQS ARM_G1S_IRQS, \
FVP_IRQ_TZ_WDOG, \
FVP_IRQ_SEC_SYS_TIMER
#define PLAT_ARM_G0_IRQS ARM_G0_IRQS
#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
ARM_G1S_IRQ_PROPS(grp), \
INTR_PROP_DESC(FVP_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, grp, \
......
plat/arm/board/fvp/platform.mk
View file @ 60e19f57
......@@ -69,19 +69,6 @@ FVP_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
plat/arm/common/arm_gicv2.c
FVP_DT_PREFIX := fvp-base-gicv2-psci
else ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV3_LEGACY)
ifeq (${ARCH}, aarch32)
$(error "GICV3 Legacy driver not supported for AArch32 build")
endif
FVP_GIC_SOURCES := drivers/arm/gic/arm_gic.c \
drivers/arm/gic/gic_v2.c \
drivers/arm/gic/gic_v3.c \
plat/common/plat_gic.c \
plat/arm/common/arm_gicv3_legacy.c
FVP_DT_PREFIX := fvp-base-gicv2-psci
else
$(error "Incorrect GIC driver chosen on FVP port")
endif
......@@ -208,9 +195,6 @@ $(eval FVP_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(FVP_HW_CONFIG_DTS
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_HW_CONFIG},--hw-config))
endif
# Disable the PSCI platform compatibility layer
ENABLE_PLAT_COMPAT := 0
# Enable Activity Monitor Unit extensions by default
ENABLE_AMU := 1
......@@ -247,9 +231,7 @@ include plat/arm/board/common/board_common.mk
include plat/arm/common/arm_common.mk
# FVP being a development platform, enable capability to disable Authentication
# dynamically if TRUSTED_BOARD_BOOT and LOAD_IMAGE_V2 is set.
# dynamically if TRUSTED_BOARD_BOOT is set.
ifeq (${TRUSTED_BOARD_BOOT}, 1)
ifeq (${LOAD_IMAGE_V2}, 1)
DYN_DISABLE_AUTH := 1
endif
endif
plat/arm/board/juno/platform.mk
View file @ 60e19f57
......@@ -115,9 +115,6 @@ ERRATA_A72_859971 := 0
# power down sequence
SKIP_A57_L1_FLUSH_PWR_DWN := 1
# Disable the PSCI platform compatibility layer
ENABLE_PLAT_COMPAT := 0
# Enable memory map related constants optimisation
ARM_BOARD_OPTIMISE_MEM := 1
......
plat/arm/common/arm_bl1_setup.c
View file @ 60e19f57
......@@ -76,16 +76,6 @@ void arm_bl1_early_platform_setup(void)
/* Allow BL1 to see the whole Trusted RAM */
bl1_tzram_layout.total_base = ARM_BL_RAM_BASE;
bl1_tzram_layout.total_size = ARM_BL_RAM_SIZE;
#if !LOAD_IMAGE_V2
/* Calculate how much RAM BL1 is using and how much remains free */
bl1_tzram_layout.free_base = ARM_BL_RAM_BASE;
bl1_tzram_layout.free_size = ARM_BL_RAM_SIZE;
reserve_mem(&bl1_tzram_layout.free_base,
&bl1_tzram_layout.free_size,
BL1_RAM_BASE,
BL1_RAM_LIMIT - BL1_RAM_BASE);
#endif /* LOAD_IMAGE_V2 */
}
void bl1_early_platform_setup(void)
......@@ -155,13 +145,12 @@ void arm_bl1_platform_setup(void)
{
/* Initialise the IO layer and register platform IO devices */
plat_arm_io_setup();
#if LOAD_IMAGE_V2
arm_load_tb_fw_config();
#if TRUSTED_BOARD_BOOT
/* Share the Mbed TLS heap info with other images */
arm_bl1_set_mbedtls_heap();
#endif /* TRUSTED_BOARD_BOOT */
#endif /* LOAD_IMAGE_V2 */
/*
* Allow access to the System counter timer module and program
* counter frequency for non secure images during FWU
......
plat/arm/common/arm_bl2_setup.c
View file @ 60e19f57
......@@ -40,138 +40,9 @@ CASSERT(BL2_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_bl2_base_overflows);
bl2_tzram_layout.total_size, \
MT_MEMORY | MT_RW | MT_SECURE)
#if LOAD_IMAGE_V2
#pragma weak arm_bl2_plat_handle_post_image_load
#else /* LOAD_IMAGE_V2 */
/*******************************************************************************
* This structure represents the superset of information that is passed to
* BL31, e.g. while passing control to it from BL2, bl31_params
* and other platform specific params
******************************************************************************/
typedef struct bl2_to_bl31_params_mem {
bl31_params_t bl31_params;
image_info_t bl31_image_info;
image_info_t bl32_image_info;
image_info_t bl33_image_info;
entry_point_info_t bl33_ep_info;
entry_point_info_t bl32_ep_info;
entry_point_info_t bl31_ep_info;
} bl2_to_bl31_params_mem_t;
static bl2_to_bl31_params_mem_t bl31_params_mem;
/* Weak definitions may be overridden in specific ARM standard platform */
#pragma weak bl2_plat_get_bl31_params
#pragma weak bl2_plat_get_bl31_ep_info
#pragma weak bl2_plat_flush_bl31_params
#pragma weak bl2_plat_set_bl31_ep_info
#pragma weak bl2_plat_get_scp_bl2_meminfo
#pragma weak bl2_plat_get_bl32_meminfo
#pragma weak bl2_plat_set_bl32_ep_info
#pragma weak bl2_plat_get_bl33_meminfo
#pragma weak bl2_plat_set_bl33_ep_info
#if ARM_BL31_IN_DRAM
meminfo_t *bl2_plat_sec_mem_layout(void)
{
static meminfo_t bl2_dram_layout
__aligned(CACHE_WRITEBACK_GRANULE) = {
.total_base = BL31_BASE,
.total_size = (ARM_AP_TZC_DRAM1_BASE +
ARM_AP_TZC_DRAM1_SIZE) - BL31_BASE,
.free_base = BL31_BASE,
.free_size = (ARM_AP_TZC_DRAM1_BASE +
ARM_AP_TZC_DRAM1_SIZE) - BL31_BASE
};
return &bl2_dram_layout;
}
#else
meminfo_t *bl2_plat_sec_mem_layout(void)
{
return &bl2_tzram_layout;
}
#endif /* ARM_BL31_IN_DRAM */
/*******************************************************************************
* This function assigns a pointer to the memory that the platform has kept
* aside to pass platform specific and trusted firmware related information
* to BL31. This memory is allocated by allocating memory to
* bl2_to_bl31_params_mem_t structure which is a superset of all the
* structure whose information is passed to BL31
* NOTE: This function should be called only once and should be done
* before generating params to BL31
******************************************************************************/
bl31_params_t *bl2_plat_get_bl31_params(void)
{
bl31_params_t *bl2_to_bl31_params;
/*
* Initialise the memory for all the arguments that needs to
* be passed to BL31
*/
zeromem(&bl31_params_mem, sizeof(bl2_to_bl31_params_mem_t));
/* Assign memory for TF related information */
bl2_to_bl31_params = &bl31_params_mem.bl31_params;
SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
/* Fill BL31 related information */
bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
VERSION_1, 0);
/* Fill BL32 related information if it exists */
#ifdef BL32_BASE
bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
VERSION_1, 0);
bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
VERSION_1, 0);
#endif /* BL32_BASE */
/* Fill BL33 related information */
bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
PARAM_EP, VERSION_1, 0);
/* BL33 expects to receive the primary CPU MPID (through x0) */
bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
VERSION_1, 0);
return bl2_to_bl31_params;
}
/* Flush the TF params and the TF plat params */
void bl2_plat_flush_bl31_params(void)
{
flush_dcache_range((unsigned long)&bl31_params_mem,
sizeof(bl2_to_bl31_params_mem_t));
}
/*******************************************************************************
* This function returns a pointer to the shared memory that the platform
* has kept to point to entry point information of BL31 to BL2
******************************************************************************/
struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
{
#if DEBUG
bl31_params_mem.bl31_ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL;
#endif
return &bl31_params_mem.bl31_ep_info;
}
#endif /* LOAD_IMAGE_V2 */
/*******************************************************************************
* BL1 has passed the extents of the trusted SRAM that should be visible to BL2
* in x0. This memory layout is sitting at the base of the free trusted SRAM.
......@@ -189,10 +60,8 @@ void arm_bl2_early_platform_setup(uintptr_t tb_fw_config,
/* Initialise the IO layer and register platform IO devices */
plat_arm_io_setup();
#if LOAD_IMAGE_V2
if (tb_fw_config != 0U)
arm_bl2_set_tb_cfg_addr((void *)tb_fw_config);
#endif
}
void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
......@@ -208,9 +77,7 @@ void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_
*/
void bl2_plat_preload_setup(void)
{
#if LOAD_IMAGE_V2
arm_bl2_dyn_cfg_init();
#endif
}
/*
......@@ -274,7 +141,6 @@ void bl2_plat_arch_setup(void)
arm_bl2_plat_arch_setup();
}
#if LOAD_IMAGE_V2
int arm_bl2_handle_post_image_load(unsigned int image_id)
{
int err = 0;
......@@ -342,86 +208,3 @@ int bl2_plat_handle_post_image_load(unsigned int image_id)
{
return arm_bl2_plat_handle_post_image_load(image_id);
}
#else /* LOAD_IMAGE_V2 */
/*******************************************************************************
* Populate the extents of memory available for loading SCP_BL2 (if used),
* i.e. anywhere in trusted RAM as long as it doesn't overwrite BL2.
******************************************************************************/
void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
{
*scp_bl2_meminfo = bl2_tzram_layout;
}
/*******************************************************************************
* Before calling this function BL31 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL31 and set SPSR and security state.
* On ARM standard platforms we only set the security state of the entrypoint
******************************************************************************/
void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
entry_point_info_t *bl31_ep_info)
{
SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
DISABLE_ALL_EXCEPTIONS);
}
/*******************************************************************************
* Before calling this function BL32 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL32 and set SPSR and security state.
* On ARM standard platforms we only set the security state of the entrypoint
******************************************************************************/
#ifdef BL32_BASE
void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
entry_point_info_t *bl32_ep_info)
{
SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
bl32_ep_info->spsr = arm_get_spsr_for_bl32_entry();
}
/*******************************************************************************
* Populate the extents of memory available for loading BL32
******************************************************************************/
void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
{
/*
* Populate the extents of memory available for loading BL32.
*/
bl32_meminfo->total_base = BL32_BASE;
bl32_meminfo->free_base = BL32_BASE;
bl32_meminfo->total_size =
(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
bl32_meminfo->free_size =
(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
}
#endif /* BL32_BASE */
/*******************************************************************************
* Before calling this function BL33 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL33 and set SPSR and security state.
* On ARM standard platforms we only set the security state of the entrypoint
******************************************************************************/
void bl2_plat_set_bl33_ep_info(image_info_t *image,
entry_point_info_t *bl33_ep_info)
{
SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
bl33_ep_info->spsr = arm_get_spsr_for_bl33_entry();
}
/*******************************************************************************
* Populate the extents of memory available for loading BL33
******************************************************************************/
void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
{
bl33_meminfo->total_base = ARM_NS_DRAM1_BASE;
bl33_meminfo->total_size = ARM_NS_DRAM1_SIZE;
bl33_meminfo->free_base = ARM_NS_DRAM1_BASE;
bl33_meminfo->free_size = ARM_NS_DRAM1_SIZE;
}
#endif /* LOAD_IMAGE_V2 */
plat/arm/common/arm_bl31_setup.c
View file @ 60e19f57
......@@ -71,13 +71,8 @@ struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type)
* while creating page tables. BL2 has flushed this information to memory, so
* we are guaranteed to pick up good data.
******************************************************************************/
#if LOAD_IMAGE_V2
void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
uintptr_t hw_config, void *plat_params_from_bl2)
#else
void arm_bl31_early_platform_setup(bl31_params_t *from_bl2, uintptr_t soc_fw_config,
uintptr_t hw_config, void *plat_params_from_bl2)
#endif
{
/* Initialize the console to provide early debug support */
arm_console_boot_init();
......@@ -135,7 +130,6 @@ void arm_bl31_early_platform_setup(bl31_params_t *from_bl2, uintptr_t soc_fw_con
assert(((unsigned long long)plat_params_from_bl2) ==
ARM_BL31_PLAT_PARAM_VAL);
# if LOAD_IMAGE_V2
/*
* Check params passed from BL2 should not be NULL,
*/
......@@ -162,29 +156,6 @@ void arm_bl31_early_platform_setup(bl31_params_t *from_bl2, uintptr_t soc_fw_con
if (bl33_image_ep_info.pc == 0U)
panic();
# else /* LOAD_IMAGE_V2 */
/*
* Check params passed from BL2 should not be NULL,
*/
assert(from_bl2 != NULL);
assert(from_bl2->h.type == PARAM_BL31);
assert(from_bl2->h.version >= VERSION_1);
/* Dynamic Config is not supported for LOAD_IMAGE_V1 */
assert(soc_fw_config == 0U);
assert(hw_config == 0U);
/*
* Copy BL32 (if populated by BL2) and BL33 entry point information.
* They are stored in Secure RAM, in BL2's address space.
*/
if (from_bl2->bl32_ep_info)
bl32_image_ep_info = *from_bl2->bl32_ep_info;
bl33_image_ep_info = *from_bl2->bl33_ep_info;
# endif /* LOAD_IMAGE_V2 */
#endif /* RESET_TO_BL31 */
}
......
plat/arm/common/arm_common.c
View file @ 60e19f57
......@@ -21,9 +21,7 @@
/* Conditionally provide a weak definition of plat_get_syscnt_freq2 to avoid
* conflicts with the definition in plat/common. */
#if ERROR_DEPRECATED
#pragma weak plat_get_syscnt_freq2
#endif
void arm_setup_romlib(void)
......
plat/arm/common/arm_common.mk
View file @ 60e19f57
......@@ -122,17 +122,11 @@ ENABLE_PMF := 1
# mapping the former as executable and the latter as execute-never.
SEPARATE_CODE_AND_RODATA := 1
# Enable new version of image loading on ARM platforms
LOAD_IMAGE_V2 := 1
# Use the multi console API, which is only available for AArch64 for now
ifeq (${ARCH}, aarch64)
MULTI_CONSOLE_API := 1
endif
# Use generic OID definition (tbbr_oid.h)
USE_TBBR_DEFS := 1
# Disable ARM Cryptocell by default
ARM_CRYPTOCELL_INTEG := 0
$(eval $(call assert_boolean,ARM_CRYPTOCELL_INTEG))
......@@ -202,7 +196,6 @@ ifeq (${BL2_AT_EL3},1)
BL2_SOURCES += plat/arm/common/arm_bl2_el3_setup.c
endif
ifeq (${LOAD_IMAGE_V2},1)
# Because BL1/BL2 execute in AArch64 mode but BL32 in AArch32 we need to use
# the AArch32 descriptors.
ifeq (${JUNO_AARCH32_EL3_RUNTIME},1)
......@@ -215,7 +208,6 @@ BL2_SOURCES += plat/arm/common/arm_image_load.c \
ifeq (${SPD},opteed)
BL2_SOURCES += lib/optee/optee_utils.c
endif
endif
BL2U_SOURCES += drivers/delay_timer/delay_timer.c \
drivers/delay_timer/generic_delay_timer.c \
......
plat/arm/common/arm_dyn_cfg.c
View file @ 60e19f57
......@@ -17,9 +17,8 @@
#include <string.h>
#include <tbbr_img_def.h>
#if LOAD_IMAGE_V2
/* Variable to store the address of TB_FW_CONFIG file */
/* Variable to store the address to TB_FW_CONFIG passed from BL1 */
static void *tb_fw_cfg_dtb;
static size_t tb_fw_cfg_dtb_size;
......@@ -39,9 +38,7 @@ static size_t mbedtls_heap_size;
* - To allocate space for the Mbed TLS heap --only if-- Trusted Board Boot
* is enabled.
* - This implementation requires the DTB to be present so that BL1 has a
* mechanism to pass the pointer to BL2. If LOAD_IMAGE_V2=0 then
* TB_FW_CONFIG is not present, which means that this implementation
* cannot be applied.
* mechanism to pass the pointer to BL2.
*/
int arm_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
{
......@@ -283,5 +280,3 @@ void arm_bl2_dyn_cfg_init(void)
dyn_disable_auth();
#endif
}
#endif /* LOAD_IMAGE_V2 */
plat/arm/common/arm_gicv3_legacy.c deleted 100644 → 0
View file @ fe199e3b
/*
* Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arm_def.h>
#include <arm_gic.h>
#include <plat_arm.h>
#include <platform.h>
#include <platform_def.h>
/******************************************************************************
* The following function is defined as weak to allow a platform to override
* the way the Legacy GICv3 driver is initialised and used.
*****************************************************************************/
#pragma weak plat_arm_gic_driver_init
#pragma weak plat_arm_gic_init
#pragma weak plat_arm_gic_cpuif_enable
#pragma weak plat_arm_gic_cpuif_disable
#pragma weak plat_arm_gic_pcpu_init
/*
* In the GICv3 Legacy mode, the Group 1 secure interrupts are treated as Group
* 0 interrupts.
*/
static const unsigned int irq_sec_array[] = {
PLAT_ARM_G0_IRQS,
PLAT_ARM_G1S_IRQS
};
void plat_arm_gic_driver_init(void)
{
arm_gic_init(PLAT_ARM_GICC_BASE,
PLAT_ARM_GICD_BASE,
PLAT_ARM_GICR_BASE,
irq_sec_array,
ARRAY_SIZE(irq_sec_array));
}
/******************************************************************************
* ARM common helper to initialize the GIC.
*****************************************************************************/
void plat_arm_gic_init(void)
{
arm_gic_setup();
}
/******************************************************************************
* ARM common helper to enable the GIC CPU interface
*****************************************************************************/
void plat_arm_gic_cpuif_enable(void)
{
arm_gic_cpuif_setup();
}
/******************************************************************************
* ARM common helper to disable the GIC CPU interface
*****************************************************************************/
void plat_arm_gic_cpuif_disable(void)
{
arm_gic_cpuif_deactivate();
}
/******************************************************************************
* ARM common helper to initialize the per-cpu distributor in GICv2 or
* redistributor interface in GICv3.
*****************************************************************************/
void plat_arm_gic_pcpu_init(void)
{
arm_gic_pcpu_distif_setup();
}
/******************************************************************************
* Stubs for Redistributor power management. Although legacy configuration isn't
* supported, these are provided for the sake of uniform GIC API
*****************************************************************************/
void plat_arm_gic_redistif_on(void)
{
return;
}
void plat_arm_gic_redistif_off(void)
{
return;
}
/******************************************************************************
* ARM common helper to save & restore the GICv3 on resume from system suspend.
*****************************************************************************/
void plat_arm_gic_save(void)
{
return;
}
void plat_arm_gic_resume(void)
{
arm_gic_setup();
}
plat/arm/common/arm_pm.c
View file @ 60e19f57
......@@ -6,7 +6,6 @@
#include <arch_helpers.h>
#include <arm_def.h>
#include <arm_gic.h>
#include <assert.h>
#include <errno.h>
#include <plat_arm.h>
......
plat/arm/css/common/css_bl2_setup.c
View file @ 60e19f57
......@@ -14,21 +14,13 @@
#include "../drivers/scp/css_scp.h"
/* Weak definition may be overridden in specific CSS based platform */
#if LOAD_IMAGE_V2
#pragma weak plat_arm_bl2_handle_scp_bl2
#else
#pragma weak bl2_plat_handle_scp_bl2
#endif
/*******************************************************************************
* Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
* Return 0 on success, -1 otherwise.
******************************************************************************/
#if LOAD_IMAGE_V2
int plat_arm_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
#else
int bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
#endif
{
int ret;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment