Commit 762688bf authored by Anson Huang's avatar Anson Huang
Browse files

imx: imx8qx: add domain suspend/resume support



Add domain suspend/resume support, Linux kernel
can "echo mem > /sys/power/state" to put system
into suspend mode, all CPUs and cluster will be
powered off and can be waked up if irq pending
in GIC, tested on i.MX8QX MEK board.
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
parent 3260f5c7
......@@ -27,3 +27,20 @@ void __dead2 imx_system_reset(void)
panic();
}
int imx_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state)
{
/* TODO */
return PSCI_E_INVALID_PARAMS;
}
void imx_get_sys_suspend_power_state(psci_power_state_t *req_state)
{
unsigned int i;
/* CPU & cluster off, system in retention */
for (i = MPIDR_AFFLVL0; i < PLAT_MAX_PWR_LVL; i++)
req_state->pwr_domain_state[i] = PLAT_MAX_OFF_STATE;
req_state->pwr_domain_state[PLAT_MAX_PWR_LVL] = PLAT_MAX_RET_STATE;
}
......@@ -8,6 +8,7 @@
#define __PLAT_IMX8_H__
#include <gicv3.h>
#include <psci.h>
unsigned int plat_calc_core_pos(uint64_t mpidr);
void imx_mailbox_init(uintptr_t base_addr);
......@@ -19,4 +20,7 @@ void plat_gic_pcpu_init(void);
void __dead2 imx_system_off(void);
void __dead2 imx_system_reset(void);
int imx_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state);
void imx_get_sys_suspend_power_state(psci_power_state_t *req_state);
#endif /*__PLAT_IMX8_H__ */
......@@ -18,13 +18,6 @@ const static int ap_core_index[PLATFORM_CORE_COUNT] = {
SC_R_A35_0, SC_R_A35_1, SC_R_A35_2, SC_R_A35_3
};
plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
const plat_local_state_t *target_state,
unsigned int ncpu)
{
return 0;
}
int imx_pwr_domain_on(u_register_t mpidr)
{
int ret = PSCI_E_SUCCESS;
......@@ -71,6 +64,29 @@ void imx_pwr_domain_off(const psci_power_state_t *target_state)
tf_printf("turn off core:%d\n", cpu_id);
}
void imx_domain_suspend(const psci_power_state_t *target_state)
{
u_register_t mpidr = read_mpidr_el1();
unsigned int cpu_id = MPIDR_AFFLVL0_VAL(mpidr);
plat_gic_cpuif_disable();
sc_pm_set_cpu_resume_addr(ipc_handle, ap_core_index[cpu_id], BL31_BASE);
sc_pm_req_cpu_low_power_mode(ipc_handle, ap_core_index[cpu_id],
SC_PM_PW_MODE_OFF, SC_PM_WAKE_SRC_GIC);
}
void imx_domain_suspend_finish(const psci_power_state_t *target_state)
{
u_register_t mpidr = read_mpidr_el1();
unsigned int cpu_id = MPIDR_AFFLVL0_VAL(mpidr);
sc_pm_req_low_power_mode(ipc_handle, ap_core_index[cpu_id],
SC_PM_PW_MODE_ON);
plat_gic_cpuif_enable();
}
static const plat_psci_ops_t imx_plat_psci_ops = {
.pwr_domain_on = imx_pwr_domain_on,
.pwr_domain_on_finish = imx_pwr_domain_on_finish,
......@@ -78,6 +94,10 @@ static const plat_psci_ops_t imx_plat_psci_ops = {
.system_off = imx_system_off,
.system_reset = imx_system_reset,
.pwr_domain_off = imx_pwr_domain_off,
.pwr_domain_suspend = imx_domain_suspend,
.pwr_domain_suspend_finish = imx_domain_suspend_finish,
.get_sys_suspend_power_state = imx_get_sys_suspend_power_state,
.validate_power_state = imx_validate_power_state,
};
int plat_setup_psci_ops(uintptr_t sec_entrypoint,
......@@ -86,5 +106,17 @@ int plat_setup_psci_ops(uintptr_t sec_entrypoint,
imx_mailbox_init(sec_entrypoint);
*psci_ops = &imx_plat_psci_ops;
/* Request low power mode for A35 cluster, only need to do once */
sc_pm_req_low_power_mode(ipc_handle, SC_R_A35, SC_PM_PW_MODE_OFF);
/* Request RUN and LP modes for DDR, system interconnect etc. */
sc_pm_req_sys_if_power_mode(ipc_handle, SC_R_A35,
SC_PM_SYS_IF_DDR, SC_PM_PW_MODE_ON, SC_PM_PW_MODE_STBY);
sc_pm_req_sys_if_power_mode(ipc_handle, SC_R_A35,
SC_PM_SYS_IF_MU, SC_PM_PW_MODE_ON, SC_PM_PW_MODE_STBY);
sc_pm_req_sys_if_power_mode(ipc_handle, SC_R_A35,
SC_PM_SYS_IF_INTERCONNECT, SC_PM_PW_MODE_ON,
SC_PM_PW_MODE_STBY);
return 0;
}
......@@ -21,6 +21,7 @@ BL31_SOURCES += plat/imx/common/lpuart_console.S \
plat/imx/imx8qx/imx8qx_psci.c \
plat/imx/common/imx8_topology.c \
plat/imx/common/imx8_psci.c \
plat/common/plat_psci_common.c \
lib/xlat_tables/xlat_tables_common.c \
lib/xlat_tables/aarch64/xlat_tables.c \
lib/cpus/aarch64/cortex_a35.S \
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment