Skip to content

GitLab

Commit 9663160d authored by Jiafei Pan's avatar Jiafei Pan
Browse files

refactor(plat/nxp/lx216x): clean up platform configure file 



Use common code in common file to configure platform.
Signed-off-by: default avatarJiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I72fe22751f12b8a4996a7b9f75fae4c912ea86de
parent 5d5c3ff3
Hide whitespace changes
Inline Side-by-side
plat/nxp/soc-lx2160a/lx2160aqds/platform.mk
View file @ 9663160d
......@@ -33,59 +33,15 @@ BL2_BIN_XSPI_NOR_END_ADDRESS := 0x100000
# config is enabled for future use cases.
FSPI_ERASE_4K := 0
# Platform specific features.
# Platform specific features.
WARM_BOOT := yes
# Adding platform specific defines
$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
ifeq (${POVDD_ENABLE},yes)
$(eval $(call add_define,CONFIG_POVDD_ENABLE))
endif
ifneq (${FLASH_TYPE},)
$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
endif
ifneq (${XSPI_FLASH_SZ},)
$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
endif
ifneq (${FSPI_ERASE_4K},)
$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
endif
ifneq (${NUM_OF_DDRC},)
$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
endif
ifneq (${DDRC_NUM_DIMM},)
$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
endif
ifneq (${DDRC_NUM_CS},)
$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
endif
ifeq (${DDR_ADDR_DEC},yes)
$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
endif
ifeq (${DDR_ECC_EN},yes)
$(eval $(call add_define,CONFIG_DDR_ECC_EN))
endif
# Platform can control the base address for non-volatile storage.
#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
ifeq (${WARM_BOOT},yes)
$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
endif
# Adding Platform files build files
# Adding Platform files build files
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c\
${BOARD_PATH}/platform.c
# Adding SoC build info
# Adding platform board build info
include plat/nxp/common/plat_make_helper/plat_common_def.mk
# Adding SoC build info
include plat/nxp/soc-lx2160a/soc.mk
plat/nxp/soc-lx2160a/lx2160ardb/platform.mk
View file @ 9663160d
......@@ -36,56 +36,12 @@ FSPI_ERASE_4K := 0
# Platform specific features.
WARM_BOOT := no
# Adding platform specific defines
$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
ifeq (${POVDD_ENABLE},yes)
$(eval $(call add_define,CONFIG_POVDD_ENABLE))
endif
ifneq (${FLASH_TYPE},)
$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
endif
ifneq (${XSPI_FLASH_SZ},)
$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
endif
ifneq (${FSPI_ERASE_4K},)
$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
endif
ifneq (${NUM_OF_DDRC},)
$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
endif
ifneq (${DDRC_NUM_DIMM},)
$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
endif
ifneq (${DDRC_NUM_CS},)
$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
endif
ifeq (${DDR_ADDR_DEC},yes)
$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
endif
ifeq (${DDR_ECC_EN},yes)
$(eval $(call add_define,CONFIG_DDR_ECC_EN))
endif
# Platform can control the base address for non-volatile storage.
#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
ifeq (${WARM_BOOT},yes)
$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
endif
# Adding Platform files build files
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c\
${BOARD_PATH}/platform.c
# Adding platform board build info
include plat/nxp/common/plat_make_helper/plat_common_def.mk
# Adding SoC build info
include plat/nxp/soc-lx2160a/soc.mk
plat/nxp/soc-lx2160a/lx2162aqds/platform.mk
View file @ 9663160d
......@@ -25,7 +25,7 @@ ERRATA_DDR_A011396 := 1
ERRATA_DDR_A050450 := 1
# On-Board Flash Details
# On-Board Flash Details
FLASH_TYPE := MT35XU512A
XSPI_FLASH_SZ := 0x10000000
NXP_XSPI_NOR_UNIT_SIZE := 0x20000
......@@ -34,59 +34,15 @@ BL2_BIN_XSPI_NOR_END_ADDRESS := 0x100000
# config is enabled for future use cases.
FSPI_ERASE_4K := 0
# Platform specific features.
# Platform specific features.
WARM_BOOT := yes
# Adding platform specific defines
$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
ifeq (${POVDD_ENABLE},yes)
$(eval $(call add_define,CONFIG_POVDD_ENABLE))
endif
ifneq (${FLASH_TYPE},)
$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
endif
ifneq (${XSPI_FLASH_SZ},)
$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
endif
ifneq (${FSPI_ERASE_4K},)
$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
endif
ifneq (${NUM_OF_DDRC},)
$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
endif
ifneq (${DDRC_NUM_DIMM},)
$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
endif
ifneq (${DDRC_NUM_CS},)
$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
endif
ifeq (${DDR_ADDR_DEC},yes)
$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
endif
ifeq (${DDR_ECC_EN},yes)
$(eval $(call add_define,CONFIG_DDR_ECC_EN))
endif
# Platform can control the base address for non-volatile storage.
#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
ifeq (${WARM_BOOT},yes)
$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
endif
# Adding Platform files build files
# Adding Platform files build files
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c\
${BOARD_PATH}/platform.c
# Adding SoC build info
# Adding platform board build info
include plat/nxp/common/plat_make_helper/plat_common_def.mk
# Adding SoC build info
include plat/nxp/soc-lx2160a/soc.mk
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment