plat: xilinx: zynqmp: Configure counter frequency during initialization

Counter frequency for generic timer of Arm-A53 based Application
Processing Unit(APU) is not configuring in case if First Stage Boot
Loader(FSBL) does not initialize counter frequency. This happens
when FSBL is running from Arm-R5 based Real-time Processing Unit(RPU).
Because of that generic timer driver functionality is not working.
So configure counter frequency during initialization.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Icfccd59d7d2340fba25ebfb2ef6a813af4290896

plat/xilinx/zynqmp/aarch64/zynqmp_common.c

@@ -350,10 +350,19 @@ unsigned int zynqmp_get_bootmode(void)
 
 void zynqmp_config_setup(void)
 {
+	uint64_t counter_freq;
+
 	/* Configure IPI data for ZynqMP */
 	zynqmp_ipi_config_table_init();
 
 	zynqmp_print_platform_name();
+
+	/* Configure counter frequency */
+	counter_freq = read_cntfrq_el0();
+	if (counter_freq == ZYNQMP_DEFAULT_COUNTER_FREQ) {
+		write_cntfrq_el0(plat_get_syscnt_freq2());
+	}
+
 	generic_delay_timer_init();
 }
 

plat/xilinx/zynqmp/include/zynqmp_def.h

@@ -17,6 +17,9 @@
 
 #define ZYNQMP_CONSOLE_IS(con)	(ZYNQMP_CONSOLE_ID_ ## con == ZYNQMP_CONSOLE)
 
+/* Default counter frequency */
+#define ZYNQMP_DEFAULT_COUNTER_FREQ	0U
+
 /* Firmware Image Package */
 #define ZYNQMP_PRIMARY_CPU		0