zynqmp: pm: Reimplement clock get state (status) EEMI API

Clock get state EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux is_enabled method for PLLs still uses clock get state API
get the PLL state, in the implementation of pm_clock_getstate() we need
to workaround this by distinguishing two cases: 1) if the given clock ID
corresponds to a PLL output clock ID; or 2) given clock ID is truly an
on-chip clock whose state of the gate should be returned.
For case 1) we'll call pm_api_clock_pll_getstate() implemented in
pm_api_clock.h/c. This function will query the PLL state from PMU using
the system-level PLL get mode EEMI API.
For case 2) we'll call the PMU to query the clock gate state using
system-level clock get status EEMI API.
Functions that appear to be unused after this change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

plat/xilinx/zynqmp/pm_service/pm_api_clock.c

@@ -2665,94 +2665,35 @@ enum pm_ret_status pm_clock_pll_disable(struct pm_pll *pll)
 }
 
 /**
- * pm_api_get_pll_state() - Get state of PLL
- * @clock_id	Id of the PLL
- * @state	State of PLL(1: Enable, 0: Reset)
+ * pm_clock_pll_get_state - Get state of the PLL
+ * @pll		Pointer to the target PLL structure
+ * @state	Location to store the state: 1/0 ("Enabled"/"Disabled")
  *
- * This function is to check state of PLL.
- */
-static inline enum pm_ret_status pm_api_get_pll_state(unsigned int clock_id,
-					unsigned int *state)
-{
-	enum pm_ret_status ret = PM_RET_SUCCESS;
-	unsigned int reg, val;
-
-	reg = clocks[clock_id].control_reg;
-
-	ret = pm_mmio_read(reg, &val);
-
-	/* state:
-	 * 1 - PLL is enabled
-	 * 0 - PLL is in reset state
-	 */
-	*state = !(val & PLLCTRL_RESET_MASK);
-	return ret;
-}
-
-/**
- * pm_api_get_clk_state() - Get the state of clock for given id
- * @clock_id: Id of the clock to be enabled
- * @state: Enable(1)/Disable(0)
- *
- * This function is to get state of the clock which is not PLL.
+ * "Enable" actually means that the PLL is locked and its bypass is deasserted,
+ * "Disable" means that it is bypassed.
  *
- * Return: Returns status, either success or error+reason.
+ * Return: PM_RET_ERROR_ARGS error if the argument is not valid, success if
+ * returned state value is valid or an error if returned by PMU
  */
-static enum pm_ret_status pm_api_get_clk_state(unsigned int clock_id,
-					       unsigned int *state)
+enum pm_ret_status pm_clock_pll_get_state(struct pm_pll *pll,
+					  unsigned int *state)
 {
-	enum pm_ret_status ret = PM_RET_SUCCESS;
-	struct pm_clock_node *nodes = *clocks[clock_id].nodes;
-	uint8_t num_nodes = clocks[clock_id].num_nodes;
-	unsigned int reg, val;
-	uint8_t i = 0;
-	uint8_t offset = NA_SHIFT, width = NA_WIDTH;
-
-	reg = clocks[clock_id].control_reg;
+	enum pm_ret_status status;
+	enum pm_pll_mode mode;
 
-	for (i = 0; i < num_nodes; i++) {
-		if (nodes->type == TYPE_GATE) {
-			offset = nodes->offset;
-			width = nodes->width;
-		}
-		nodes++;
-	}
-	if (width == NA_WIDTH)
-		return PM_RET_ERROR_NOTSUPPORTED;
-
-	ret = pm_mmio_read(reg, &val);
-	*state = (val & BIT_MASK(offset, width)) >> offset;
-
-	return ret;
-}
-
-/**
- * pm_api_clock_getstate - Get the clock state for given id
- * @clock_id	Id of the clock to be queried
- * @state	1/0 (Enabled/Disabled)
- *
- * This function is used by master to get the state of clock
- * including peripherals and PLL clocks.
- *
- * Return: Returns status, either success or error+reason.
- */
-enum pm_ret_status pm_api_clock_getstate(unsigned int clock_id,
-					 unsigned int *state)
-{
-	enum pm_ret_status ret = PM_RET_SUCCESS;
-
-	if (!pm_clock_valid(clock_id))
+	if (!pll || !state)
 		return PM_RET_ERROR_ARGS;
 
-	if (pm_clock_type(clock_id) != CLK_TYPE_OUTPUT)
-		return PM_RET_ERROR_NOTSUPPORTED;
+	status = pm_pll_get_mode(pll->nid, &mode);
+	if (status != PM_RET_SUCCESS)
+		return status;
 
-	if (ISPLL(clock_id))
-		ret = pm_api_get_pll_state(clock_id, state);
+	if (mode == PM_PLL_MODE_RESET)
+		*state = 0;
 	else
-		ret = pm_api_get_clk_state(clock_id, state);
+		*state = 1;
 
-	return ret;
+	return PM_RET_SUCCESS;
 }
 
 static enum pm_ret_status pm_api_clk_set_divider(unsigned int clock_id,

plat/xilinx/zynqmp/pm_service/pm_api_clock.h

@@ -297,8 +297,9 @@ enum pm_ret_status pm_clock_id_is_valid(unsigned int clock_id);
 
 enum pm_ret_status pm_clock_pll_enable(struct pm_pll *pll);
 enum pm_ret_status pm_clock_pll_disable(struct pm_pll *pll);
-enum pm_ret_status pm_api_clock_getstate(unsigned int clock_id,
-					 unsigned int *state);
+enum pm_ret_status pm_clock_pll_get_state(struct pm_pll *pll,
+					  unsigned int *state);
+
 enum pm_ret_status pm_api_clock_setdivider(unsigned int clock_id,
 					   unsigned int divider);
 enum pm_ret_status pm_api_clock_getdivider(unsigned int clock_id,

plat/xilinx/zynqmp/pm_service/pm_api_sys.c

@@ -932,7 +932,23 @@ enum pm_ret_status pm_clock_disable(unsigned int clock_id)
 enum pm_ret_status pm_clock_getstate(unsigned int clock_id,
 				     unsigned int *state)
 {
-	return pm_api_clock_getstate(clock_id, state);
+	struct pm_pll *pll;
+	uint32_t payload[PAYLOAD_ARG_CNT];
+	enum pm_ret_status status;
+
+	/* First try to handle it as a PLL */
+	pll = pm_clock_get_pll(clock_id);
+	if (pll)
+		return pm_clock_pll_get_state(pll, state);
+
+	/* Check if clock ID is a valid on-chip clock */
+	status = pm_clock_id_is_valid(clock_id);
+	if (status != PM_RET_SUCCESS)
+		return status;
+
+	/* Send request to the PMU */
+	PM_PACK_PAYLOAD2(payload, PM_CLOCK_GETSTATE, clock_id);
+	return pm_ipi_send_sync(primary_proc, payload, state, 1);
 }
 
 /**