imx: Use generic console_t data structure

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I058f793e4024fa7291e432f5be374a77faf16f36
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

drivers/imx/uart/imx_uart.h

@@ -154,15 +154,10 @@
 
 #ifndef __ASSEMBLER__
 
-typedef struct {
-	console_t console;
-	uintptr_t base;
-} console_imx_uart_t;
-
 int console_imx_uart_register(uintptr_t baseaddr,
 			      uint32_t clock,
 			      uint32_t baud,
-			      console_imx_uart_t *console);
+			      console_t *console);
 #endif /*__ASSEMBLER__*/
 
 #endif /* IMX_UART_H */

plat/imx/common/include/imx8_lpuart.h

@@ -54,13 +54,8 @@
 
 #include <stdint.h>
 
-typedef struct {
-	console_t console;
-	uintptr_t base;
-} console_lpuart_t;
-
 int console_lpuart_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
-			   console_lpuart_t *console);
+			   console_t *console);
 #endif /*__ASSEMBLER__*/
 
 #endif /* IMX8_LPUART_H */

plat/imx/common/include/imx_uart.h

@@ -11,13 +11,8 @@
 
 #ifndef __ASSEMBLER__
 
-typedef struct {
-	console_t console;
-	uintptr_t base;
-} console_uart_t;
-
 int console_imx_uart_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
-			   console_uart_t *console);
+			      console_t *console);
 #endif /*__ASSEMBLER__*/
 
 #endif  /* IMX_UART_H */

plat/imx/imx7/common/imx7_bl2_el3_common.c

@@ -150,7 +150,7 @@ static void imx7_setup_wdog_clocks(void)
 void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
 				  u_register_t arg3, u_register_t arg4)
 {
-	static console_imx_uart_t console;
+	static console_t console;
 	int console_scope = CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME;
 
 	/* Initialize common components */
@@ -170,7 +170,7 @@ void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
 				  PLAT_IMX7_BOOT_UART_CLK_IN_HZ,
 				  PLAT_IMX7_CONSOLE_BAUDRATE,
 				  &console);
-	console_set_scope(&console.console, console_scope);
+	console_set_scope(&console, console_scope);
 
 	/* Open handles to persistent storage */
 	plat_imx7_io_setup();

plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c

@@ -97,7 +97,7 @@ void bl31_tzc380_setup(void)
 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 		u_register_t arg2, u_register_t arg3)
 {
-	static console_uart_t console;
+	static console_t console;
 	int i;
 
 	/* Enable CSU NS access permission */
@@ -114,7 +114,7 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 	console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
 		IMX_CONSOLE_BAUDRATE, &console);
 	/* This console is only used for boot stage */
-	console_set_scope(&console.console, CONSOLE_FLAG_BOOT);
+	console_set_scope(&console, CONSOLE_FLAG_BOOT);
 
 	/*
 	 * tell BL3-1 where the non-secure software image is located

plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c

@@ -133,7 +133,7 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 	imx8m_caam_init();
 
 #if DEBUG_CONSOLE
-	static console_uart_t console;
+	static console_t console;
 
 	console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
 		IMX_CONSOLE_BAUDRATE, &console);

plat/imx/imx8qm/imx8qm_bl31_setup.c

@@ -295,7 +295,7 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 				u_register_t arg2, u_register_t arg3)
 {
 #if DEBUG_CONSOLE
-	static console_lpuart_t console;
+	static console_t console;
 #endif
 	if (sc_ipc_open(&ipc_handle, SC_IPC_BASE) != SC_ERR_NONE)
 		panic();

plat/imx/imx8qx/imx8qx_bl31_setup.c

@@ -255,7 +255,7 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 				u_register_t arg2, u_register_t arg3)
 {
 #if DEBUG_CONSOLE
-	static console_lpuart_t console;
+	static console_t console;
 #endif
 	if (sc_ipc_open(&ipc_handle, SC_IPC_BASE) != SC_ERR_NONE)
 		panic();