GCC: Upgrade to version 9.2-2019.12 of toolchain

This toolchain provides multiple cross compilers and are publicly
available on www.developer.arm.com

We thoroughly test TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)

Change-Id: I2360a3ac6705c68dca781b85e9894867df255b3e
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

docs/getting_started/initial-build.rst

@@ -8,13 +8,13 @@ Performing an Initial Build
 
    .. code:: shell
 
-       export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-linux-gnu-
+       export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-none-elf-
 
    For AArch32:
 
    .. code:: shell
 
-       export CROSS_COMPILE=<path-to-aarch32-gcc>/bin/arm-eabi-
+       export CROSS_COMPILE=<path-to-aarch32-gcc>/bin/arm-none-eabi-
 
    It is possible to build TF-A using Clang or Arm Compiler 6. To do so
    ``CC`` needs to point to the clang or armclang binary, which will
@@ -32,7 +32,7 @@ Performing an Initial Build
 
    .. code:: shell
 
-       export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-linux-gnu-
+       export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-none-elf-
        make CC=<path-to-armclang>/bin/armclang PLAT=<platform> all
 
    Clang will be selected when the base name of the path assigned to ``CC``
@@ -43,7 +43,7 @@ Performing an Initial Build
 
    .. code:: shell
 
-       export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-linux-gnu-
+       export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-none-elf-
        make CC=<path-to-clang>/bin/clang PLAT=<platform> all
 
 -  Change to the root directory of the TF-A source tree and build.

docs/getting_started/prerequisites.rst

@@ -26,7 +26,7 @@ Toolchain
 |TF-A| can be built with any of the following *cross-compiler* toolchains that
 target the Armv7-A or Armv8-A architectures:
 
-- GCC >= 8.3-2019.03 (from the `Arm Developer website`_)
+- GCC >= 9.2-2019.12 (from the `Arm Developer website`_)
 - Clang >= 4.0
 - Arm Compiler >= 6.0
 

docs/plat/allwinner.rst

@@ -26,13 +26,13 @@ To build for machines with an A64 or H5 SoC:
 
 .. code:: shell
 
-    make CROSS_COMPILE=aarch64-linux-gnu- PLAT=sun50i_a64 DEBUG=1 bl31
+    make CROSS_COMPILE=aarch64-none-elf- PLAT=sun50i_a64 DEBUG=1 bl31
 
 To build for machines with an H6 SoC:
 
 .. code:: shell
 
-    make CROSS_COMPILE=aarch64-linux-gnu- PLAT=sun50i_h6 DEBUG=1 bl31
+    make CROSS_COMPILE=aarch64-none-elf- PLAT=sun50i_h6 DEBUG=1 bl31
 
 .. _U-Boot documentation: http://git.denx.de/?p=u-boot.git;f=board/sunxi/README.sunxi64;hb=HEAD
 

docs/plat/arm/fvp/index.rst

@@ -223,7 +223,7 @@ address ``0x82000000``, the firmware can be built like this:
 
 .. code:: shell
 
-    CROSS_COMPILE=aarch64-linux-gnu-  \
+    CROSS_COMPILE=aarch64-none-elf-  \
     make PLAT=fvp DEBUG=1             \
     RESET_TO_BL31=1                   \
     ARM_LINUX_KERNEL_AS_BL33=1        \

docs/plat/arm/juno/index.rst

@@ -136,7 +136,7 @@ a single FIP binary. It assumes that a Linaro release has been installed.
 
       .. code:: shell
 
-          export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-linux-gnu-
+          export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-none-elf-
 
    -  The following parameters should be used to build BL1 and BL2 in AArch64
       and point to the BL32 file.

docs/plat/hikey.rst

@@ -78,7 +78,7 @@ Build Procedure
        EDK2_OUTPUT_DIR=${EDK2_DIR}/Build/HiKey/${BUILD_OPTION}_${AARCH64_TOOLCHAIN}
        # Build fastboot for Trusted Firmware-A. It's used for recovery mode.
        cd ${BUILD_PATH}/atf-fastboot
-       CROSS_COMPILE=aarch64-linux-gnu- make PLAT=hikey DEBUG=1
+       CROSS_COMPILE=aarch64-none-elf- make PLAT=hikey DEBUG=1
        # Convert DEBUG/RELEASE to debug/release
        FASTBOOT_BUILD_OPTION=$(echo ${BUILD_OPTION} | tr '[A-Z]' '[a-z]')
        cd ${EDK2_DIR}

docs/plat/imx8.rst

@@ -40,7 +40,7 @@ Build Procedure
 
    .. code:: shell
 
-       CROSS_COMPILE=aarch64-linux-gnu- make PLAT=<Target_SoC> bl31
+       CROSS_COMPILE=aarch64-none-elf- make PLAT=<Target_SoC> bl31
 
    Target_SoC should be "imx8qm" for i.MX8QM SoC.
    Target_SoC should be "imx8qx" for i.MX8QX SoC.

docs/plat/imx8m.rst

@@ -28,7 +28,7 @@ Build Procedure
 
    .. code:: shell
 
-       CROSS_COMPILE=aarch64-linux-gnu- make PLAT=<Target_SoC> bl31
+       CROSS_COMPILE=aarch64-none-elf- make PLAT=<Target_SoC> bl31
 
    Target_SoC should be "imx8mq" for i.MX8MQ SoC.
    Target_SoC should be "imx8mm" for i.MX8MM SoC.

docs/plat/intel-agilex.rst

@@ -41,7 +41,7 @@ Build Procedure
 
 .. code:: bash
 
-       make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=agilex
+       make CROSS_COMPILE=aarch64-none-elf- bl2 fip PLAT=agilex
        BL33=PEI.ROM
 
 Install Procedure

docs/plat/intel-stratix10.rst

@@ -41,7 +41,7 @@ Build Procedure
 
 .. code:: bash
 
-       make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=stratix10
+       make CROSS_COMPILE=aarch64-none-elf- bl2 fip PLAT=stratix10
        BL33=PEI.ROM
 
 Install Procedure

docs/plat/ls1043a.rst

@@ -59,13 +59,13 @@ Build Procedure
 
    .. code:: shell
 
-       CROSS_COMPILE=aarch64-linux-gnu- make PLAT=ls1043 bl1
+       CROSS_COMPILE=aarch64-none-elf- make PLAT=ls1043 bl1
 
    Build fip:
 
    .. code:: shell
 
-       CROSS_COMPILE=aarch64-linux-gnu- make PLAT=ls1043 fip \
+       CROSS_COMPILE=aarch64-none-elf- make PLAT=ls1043 fip \
        BL33=u-boot.bin NEED_BL32=yes BL32=tee.bin SPD=opteed
 
 Deploy TF-A Images

docs/plat/marvell/build.rst

@@ -9,7 +9,7 @@ Build Instructions
 
     .. code:: shell
 
-        > export CROSS_COMPILE=/path/to/toolchain/aarch64-linux-gnu-
+        > export CROSS_COMPILE=/path/to/toolchain/aarch64-none-elf-
 
 (2) Set path for FIP images:
 

docs/plat/meson-g12a.rst

@@ -17,7 +17,7 @@ In order to build it:
 
 .. code:: shell
 
-    CROSS_COMPILE=aarch64-linux-gnu- make DEBUG=1 PLAT=g12a
+    CROSS_COMPILE=aarch64-none-elf- make DEBUG=1 PLAT=g12a
 
 This port has been tested on a SEI510 board. After building it, follow the
 instructions in the `gxlimg repository` or `U-Boot repository`_, replacing the

docs/plat/meson-gxbb.rst

@@ -17,7 +17,7 @@ In order to build it:
 
 .. code:: shell
 
-    CROSS_COMPILE=aarch64-linux-gnu- make DEBUG=1 PLAT=gxbb bl31
+    CROSS_COMPILE=aarch64-none-elf- make DEBUG=1 PLAT=gxbb bl31
 
 This port has been tested in a ODROID-C2. After building it, follow the
 instructions in the `U-Boot repository`_, replacing the mentioned **bl31.bin**

docs/plat/meson-gxl.rst

@@ -17,7 +17,7 @@ In order to build it:
 
 .. code:: shell
 
-    CROSS_COMPILE=aarch64-linux-gnu- make DEBUG=1 PLAT=gxl
+    CROSS_COMPILE=aarch64-none-elf- make DEBUG=1 PLAT=gxl
 
 This port has been tested on a Lepotato. After building it, follow the
 instructions in the `gxlimg repository` or `U-Boot repository`_, replacing the

docs/plat/mt8183.rst

@@ -17,4 +17,4 @@ How to Build
 
 .. code:: shell
 
-    make CROSS_COMPILE=aarch64-linux-gnu- PLAT=mt8183 DEBUG=1
+    make CROSS_COMPILE=aarch64-none-elf- PLAT=mt8183 DEBUG=1

docs/plat/poplar.rst

@@ -68,7 +68,7 @@ Build Procedure
 
 .. code:: bash
 
-       make CROSS_COMPILE=aarch64-linux-gnu-  all fip SPD=none PLAT=poplar
+       make CROSS_COMPILE=aarch64-none-elf- all fip SPD=none PLAT=poplar
        BL33=u-boot.bin
 
 -  Build l-loader (generated the final fastboot.bin)

docs/plat/qemu-sbsa.rst

@@ -27,7 +27,7 @@ To build TF-A:
 
     git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git tfa
     cd tfa
-    export CROSS_COMPILE=aarch64-linux-gnu-
+    export CROSS_COMPILE=aarch64-none-elf-
     make PLAT=qemu_sbsa all fip
 
 Images will be placed at build/qemu_sbsa/release (bl1.bin and fip.bin).

docs/plat/rockchip.rst

@@ -35,7 +35,7 @@ these images need to get build from the TF-A repository.
 
 For AARCH64 architectures the build command looks like
 
-    make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl32
+    make CROSS_COMPILE=aarch64-none-elf- PLAT=rk3399 bl32
 
 while AARCH32 needs a slightly different command
 

docs/plat/rpi3.rst

@@ -315,7 +315,7 @@ Then compile TF-A. For a 32-bit kernel, use the following command line:
 
 .. code:: shell
 
-    CROSS_COMPILE=aarch64-linux-gnu- make PLAT=rpi3             \
+    CROSS_COMPILE=aarch64-none-elf- make PLAT=rpi3             \
     RPI3_BL33_IN_AARCH32=1                                      \
     BL33=../rpi3-arm-tf-bootstrap/aarch32/el2-bootstrap.bin
 
@@ -323,7 +323,7 @@ For a 64-bit kernel, use this other command line:
 
 .. code:: shell
 
-    CROSS_COMPILE=aarch64-linux-gnu- make PLAT=rpi3             \
+    CROSS_COMPILE=aarch64-none-elf- make PLAT=rpi3             \
     BL33=../rpi3-arm-tf-bootstrap/aarch64/el2-bootstrap.bin
 
 However, enabling PSCI support in a 64-bit kernel is really easy. In the
@@ -340,7 +340,7 @@ For a 64-bit kernel:
 
 .. code:: shell
 
-    CROSS_COMPILE=aarch64-linux-gnu- make PLAT=rpi3             \
+    CROSS_COMPILE=aarch64-none-elf- make PLAT=rpi3             \
     PRELOADED_BL33_BASE=0x02000000                              \
     RPI3_PRELOADED_DTB_BASE=0x01000000                          \
     RPI3_DIRECT_LINUX_BOOT=1
@@ -349,7 +349,7 @@ For a 32-bit kernel:
 
 .. code:: shell
 
-    CROSS_COMPILE=aarch64-linux-gnu- make PLAT=rpi3             \
+    CROSS_COMPILE=aarch64-none-elf- make PLAT=rpi3             \
     PRELOADED_BL33_BASE=0x02000000                              \
     RPI3_PRELOADED_DTB_BASE=0x01000000                          \
     RPI3_DIRECT_LINUX_BOOT=1                                    \