poplar: Fix format of documentation

The document was being rendered incorrectly.

Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

docs/plat/poplar.rst

@@ -11,6 +11,8 @@ of running any commercial set-top solution based on Linux or Android.
 It supports a premium user experience with up to H.265 HEVC decoding of 4K
 video at 60 frames per second.
 
+::
+
     SOC Hisilicon Hi3798CV200
     CPU Quad-core ARM Cortex-A53 64 bit
     DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
@@ -28,6 +30,8 @@ At the start of the boot sequence, the bootROM executes the so called l-loader
 binary whose main role is to change the processor state to 64bit mode. This
 must  happen prior invoking the arm trusted  firmware:
 
+::
+
     l-loader --> arm_trusted_firmware --> u-boot
 
 How to build
@@ -54,10 +58,16 @@ Build Procedure
 -  Prepare the AARCH64 toolchain.
 
 -  Build u-boot using poplar_defconfig
+
+.. code:: bash
+
        make CROSS_COMPILE=aarch64-linux-gnu- poplar_defconfig
        make CROSS_COMPILE=aarch64-linux-gnu-
 
 -  Build atf providing the previously generated u-boot.bin as the BL33 image
+
+.. code:: bash
+
        make CROSS_COMPILE=aarch64-linux-gnu-  all fip SPD=none PLAT=poplar
        BL33=u-boot.bin
 
@@ -81,85 +91,86 @@ working firmware to eMMC.
 Boot trace
 ==========
 
-Bootrom start
-Boot Media: eMMC
-Decrypt auxiliary code ...OK
-
-lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
-
-Entry boot auxiliary code
-
-Auxiliary code - v1.00
-DDR code - V1.1.2 20160205
-Build: Mar 24 2016 - 17:09:44
-Reg Version:  v134
-Reg Time:     2016/03/18 09:44:55
-Reg Name:     hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
-
-Boot auxiliary code success
-Bootrom success
-
-LOADER:  Switched to aarch64 mode
-LOADER:  Entering ARM TRUSTED FIRMWARE
-LOADER:  CPU0 executes at 0x000ce000
-
-INFO:    BL1: 0xe1000 - 0xe7000 [size = 24576]
-NOTICE:  Booting Trusted Firmware
-NOTICE:  BL1: v1.3(debug):v1.3-372-g1ba9c60
-NOTICE:  BL1: Built : 17:51:33, Apr 30 2017
-INFO:    BL1: RAM 0xe1000 - 0xe7000
-INFO:    BL1: Loading BL2
-INFO:    Loading image id=1 at address 0xe9000
-INFO:    Image id=1 loaded at address 0xe9000, size = 0x5008
-NOTICE:  BL1: Booting BL2
-INFO:    Entry point address = 0xe9000
-INFO:    SPSR = 0x3c5
-NOTICE:  BL2: v1.3(debug):v1.3-372-g1ba9c60
-NOTICE:  BL2: Built : 17:51:33, Apr 30 2017
-INFO:    BL2: Loading BL31
-INFO:    Loading image id=3 at address 0x129000
-INFO:    Image id=3 loaded at address 0x129000, size = 0x8038
-INFO:    BL2: Loading BL33
-INFO:    Loading image id=5 at address 0x37000000
-INFO:    Image id=5 loaded at address 0x37000000, size = 0x58f17
-NOTICE:  BL1: Booting BL31
-INFO:    Entry point address = 0x129000
-INFO:    SPSR = 0x3cd
-INFO:    Boot bl33 from 0x37000000 for 364311 Bytes
-NOTICE:  BL31: v1.3(debug):v1.3-372-g1ba9c60
-NOTICE:  BL31: Built : 17:51:33, Apr 30 2017
-INFO:    BL31: Initializing runtime services
-INFO:    BL31: Preparing for EL3 exit to normal world
-INFO:    Entry point address = 0x37000000
-INFO:    SPSR = 0x3c9
-
-
-U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
-
-Model: HiSilicon Poplar Development Board
-BOARD: Hisilicon HI3798cv200 Poplar
-DRAM:  1 GiB
-MMC:   Hisilicon DWMMC: 0
-In:    serial@f8b00000
-Out:   serial@f8b00000
-Err:   serial@f8b00000
-Net:   Net Initialization Skipped
-No ethernet found.
-
-Hit any key to stop autoboot:  0
-starting USB...
-USB0:   USB EHCI 1.00
-scanning bus 0 for devices... 1 USB Device(s) found
-USB1:   USB EHCI 1.00
-scanning bus 1 for devices... 4 USB Device(s) found
-       scanning usb for storage devices... 1 Storage Device(s) found
-       scanning usb for ethernet devices... 1 Ethernet Device(s) found
-
-USB device 0:
-    Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
-            Type: Removable Hard Disk
-            Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
-... is now current device
-Scanning usb 0:1...
-=>
-
+::
+
+    Bootrom start
+    Boot Media: eMMC
+    Decrypt auxiliary code ...OK
+
+    lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
+
+    Entry boot auxiliary code
+
+    Auxiliary code - v1.00
+    DDR code - V1.1.2 20160205
+    Build: Mar 24 2016 - 17:09:44
+    Reg Version:  v134
+    Reg Time:     2016/03/18 09:44:55
+    Reg Name:     hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
+
+    Boot auxiliary code success
+    Bootrom success
+
+    LOADER:  Switched to aarch64 mode
+    LOADER:  Entering ARM TRUSTED FIRMWARE
+    LOADER:  CPU0 executes at 0x000ce000
+
+    INFO:    BL1: 0xe1000 - 0xe7000 [size = 24576]
+    NOTICE:  Booting Trusted Firmware
+    NOTICE:  BL1: v1.3(debug):v1.3-372-g1ba9c60
+    NOTICE:  BL1: Built : 17:51:33, Apr 30 2017
+    INFO:    BL1: RAM 0xe1000 - 0xe7000
+    INFO:    BL1: Loading BL2
+    INFO:    Loading image id=1 at address 0xe9000
+    INFO:    Image id=1 loaded at address 0xe9000, size = 0x5008
+    NOTICE:  BL1: Booting BL2
+    INFO:    Entry point address = 0xe9000
+    INFO:    SPSR = 0x3c5
+    NOTICE:  BL2: v1.3(debug):v1.3-372-g1ba9c60
+    NOTICE:  BL2: Built : 17:51:33, Apr 30 2017
+    INFO:    BL2: Loading BL31
+    INFO:    Loading image id=3 at address 0x129000
+    INFO:    Image id=3 loaded at address 0x129000, size = 0x8038
+    INFO:    BL2: Loading BL33
+    INFO:    Loading image id=5 at address 0x37000000
+    INFO:    Image id=5 loaded at address 0x37000000, size = 0x58f17
+    NOTICE:  BL1: Booting BL31
+    INFO:    Entry point address = 0x129000
+    INFO:    SPSR = 0x3cd
+    INFO:    Boot bl33 from 0x37000000 for 364311 Bytes
+    NOTICE:  BL31: v1.3(debug):v1.3-372-g1ba9c60
+    NOTICE:  BL31: Built : 17:51:33, Apr 30 2017
+    INFO:    BL31: Initializing runtime services
+    INFO:    BL31: Preparing for EL3 exit to normal world
+    INFO:    Entry point address = 0x37000000
+    INFO:    SPSR = 0x3c9
+
+
+    U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
+
+    Model: HiSilicon Poplar Development Board
+    BOARD: Hisilicon HI3798cv200 Poplar
+    DRAM:  1 GiB
+    MMC:   Hisilicon DWMMC: 0
+    In:    serial@f8b00000
+    Out:   serial@f8b00000
+    Err:   serial@f8b00000
+    Net:   Net Initialization Skipped
+    No ethernet found.
+
+    Hit any key to stop autoboot:  0
+    starting USB...
+    USB0:   USB EHCI 1.00
+    scanning bus 0 for devices... 1 USB Device(s) found
+    USB1:   USB EHCI 1.00
+    scanning bus 1 for devices... 4 USB Device(s) found
+           scanning usb for storage devices... 1 Storage Device(s) found
+           scanning usb for ethernet devices... 1 Ethernet Device(s) found
+
+    USB device 0:
+        Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
+                Type: Removable Hard Disk
+                Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
+    ... is now current device
+    Scanning usb 0:1...
+    =>