Skip to content

GitLab

"vscode:/vscode.git/clone" did not exist on "45314ee5b7ad2d7daafe940b801ddacd151d7017"
Commit e40ae239 authored by danh-arm's avatar danh-arm
Browse files

Merge pull request #200 from danh-arm/dh/fix-reset-to-bl31-part2 

Fix reset to BL3-1 instructions in user guide, part 2
parents 21387b8f 7ea4c437
Hide whitespace changes
Inline Side-by-side
docs/user-guide.md
View file @ e40ae239
......@@ -690,31 +690,51 @@ trusted ROM and NOR FLASH0 respectively.
### Notes regarding Base FVP configuration options
1. The `-C bp.flashloader0.fname` parameter is used to load a Firmware Image
Package at the start of NOR FLASH0 (see the "Building the Trusted Firmware"
section above).
Please refer to these notes in the subsequent "Running on the Base FVP"
sections.
2. Using `cache_state_modelled=1` makes booting very slow. The software will
still work (and run much faster) without this option but this will hide any
cache maintenance defects in the software.
1. The `-C bp.flashloader0.fname` parameter is used to load a Firmware Image
Package at the start of NOR FLASH0 (see the "Building the Trusted Firmware"
section above).
3. Using the `-C bp.virtioblockdevice.image_path` parameter is not necessary
if a Linux RAM-disk file-system is used (see the "Obtaining a root file-system"
section above).
2. Using `cache_state_modelled=1` makes booting very slow. The software will
still work (and run much faster) without this option but this will hide any
cache maintenance defects in the software.
4. Setting the `-C bp.secure_memory` parameter to `1` is only supported on
Base FVP versions 5.4 and newer. Setting this parameter to `0` is also
supported. The `-C bp.tzc_400.diagnostics=1` parameter is optional. It
instructs the FVP to provide some helpful information if a secure memory
violation occurs.
3. Using the `-C bp.virtioblockdevice.image_path` parameter is not necessary
if a Linux RAM-disk file-system is used (see the "Obtaining a root
file-system" section above).
5. The `--data="<path-to><bl31/bl32/bl33-binary>"@base address of binaries`
parameter is used to load bootloader images in the Base FVP memory (see the
"Building the Trusted Firmware" section above). The base address used to
load the binaries with --data should match the image base addresses in
platform_def.h used while linking the images.
BL3-2 image is only needed if BL3-1 has been built to expect a secure-EL1
payload.
4. Setting the `-C bp.secure_memory` parameter to `1` is only supported on
Base FVP versions 5.4 and newer. Setting this parameter to `0` is also
supported. The `-C bp.tzc_400.diagnostics=1` parameter is optional. It
instructs the FVP to provide some helpful information if a secure memory
violation occurs.
5. This and the following notes only apply when the firmware is built with
the `RESET_TO_BL31` option.
The `--data="<path-to><bl31|bl32|bl33-binary>"@<base-address-of-binary>`
parameter is used to load bootloader images into Base FVP memory (see the
"Building the Trusted Firmware" section above). The base addresses used
should match the image base addresses in `platform_def.h` used while linking
the images. The BL3-2 image is only needed if BL3-1 has been built to expect
a Secure-EL1 Payload.
6. The `-C cluster<X>.cpu<Y>.RVBAR=@<base-address-of-bl31>` parameter, where
X and Y are the cluster and CPU numbers respectively, is used to set the
reset vector for each core.
7. Changing the default value of `FVP_SHARED_DATA_LOCATION` will also require
changing the value of
`--data="<path-to><bl31-binary>"@<base-address-of-bl31>` and
`-C cluster<X>.cpu<X>.RVBAR=@<base-address-of-bl31>`, to the new value of
`BL31_BASE` in `platform_def.h`.
8. Changing the default value of `FVP_TSP_RAM_LOCATION` will also require
changing the value of
`--data="<path-to><bl32-binary>"@<base-address-of-bl32>` to the new value of
`BL32_BASE` in `platform_def.h`.
### Running on the AEMv8 Base FVP with reset to BL1 entrypoint
......@@ -763,10 +783,6 @@ information about some of the options to run the software.
The following `FVP_Base_AEMv8A-AEMv8A` parameters should be used to boot Linux
with 8 CPUs using the ARM Trusted Firmware.
NOTE: Uses the `-c clusterX.cpuX.RVBAR=@base address of BL3-1` where X is
the cluster number in clusterX and cpu number in cpuX is used to set the reset
vector for each core.
<path-to>/FVP_Base_AEMv8A-AEMv8A \
-C pctl.startup=0.0.0.0 \
-C bp.secure_memory=1 \
......@@ -775,15 +791,15 @@ vector for each core.
-C cluster1.NUM_CORES=4 \
-C cache_state_modelled=1 \
-C bp.pl011_uart0.untimed_fifos=1 \
-C cluster0.cpu0.RVBAR=0x04023000 \
-C cluster0.cpu1.RVBAR=0x04023000 \
-C cluster0.cpu2.RVBAR=0x04023000 \
-C cluster0.cpu3.RVBAR=0x04023000 \
-C cluster1.cpu0.RVBAR=0x04023000 \
-C cluster1.cpu1.RVBAR=0x04023000 \
-C cluster1.cpu2.RVBAR=0x04023000 \
-C cluster1.cpu3.RVBAR=0x04023000 \
--data cluster0.cpu0="<path-to>/<bl31-binary>"@0x04023000 \
-C cluster0.cpu0.RVBAR=0x04022000 \
-C cluster0.cpu1.RVBAR=0x04022000 \
-C cluster0.cpu2.RVBAR=0x04022000 \
-C cluster0.cpu3.RVBAR=0x04022000 \
-C cluster1.cpu0.RVBAR=0x04022000 \
-C cluster1.cpu1.RVBAR=0x04022000 \
-C cluster1.cpu2.RVBAR=0x04022000 \
-C cluster1.cpu3.RVBAR=0x04022000 \
--data cluster0.cpu0="<path-to>/<bl31-binary>"@0x04022000 \
--data cluster0.cpu0="<path-to>/<bl32-binary>"@0x04000000 \
--data cluster0.cpu0="<path-to>/<bl33-binary>"@0x88000000 \
-C bp.virtioblockdevice.image_path="<path-to>/<file-system-image>"
......@@ -796,25 +812,21 @@ information about some of the options to run the software.
The following `FVP_Base_Cortex-A57x4-A53x4` model parameters should be used to
boot Linux with 8 CPUs using the ARM Trusted Firmware.
NOTE: Uses the `-c clusterX.cpuX.RVBARADDR=@base address of BL3-1` where X is
the cluster number in clusterX and cpu number in cpuX is used to set the reset
vector for each core.
<path-to>/FVP_Base_Cortex-A57x4-A53x4 \
-C pctl.startup=0.0.0.0 \
-C bp.secure_memory=1 \
-C bp.tzc_400.diagnostics=1 \
-C cache_state_modelled=1 \
-C bp.pl011_uart0.untimed_fifos=1 \
-C cluster0.cpu0.RVBARADDR=0x04023000 \
-C cluster0.cpu1.RVBARADDR=0x04023000 \
-C cluster0.cpu2.RVBARADDR=0x04023000 \
-C cluster0.cpu3.RVBARADDR=0x04023000 \
-C cluster1.cpu0.RVBARADDR=0x04023000 \
-C cluster1.cpu1.RVBARADDR=0x04023000 \
-C cluster1.cpu2.RVBARADDR=0x04023000 \
-C cluster1.cpu3.RVBARADDR=0x04023000 \
--data cluster0.cpu0="<path-to>/<bl31-binary>"@0x04023000 \
-C cluster0.cpu0.RVBARADDR=0x04022000 \
-C cluster0.cpu1.RVBARADDR=0x04022000 \
-C cluster0.cpu2.RVBARADDR=0x04022000 \
-C cluster0.cpu3.RVBARADDR=0x04022000 \
-C cluster1.cpu0.RVBARADDR=0x04022000 \
-C cluster1.cpu1.RVBARADDR=0x04022000 \
-C cluster1.cpu2.RVBARADDR=0x04022000 \
-C cluster1.cpu3.RVBARADDR=0x04022000 \
--data cluster0.cpu0="<path-to>/<bl31-binary>"@0x04022000 \
--data cluster0.cpu0="<path-to>/<bl32-binary>"@0x04000000 \
--data cluster0.cpu0="<path-to>/<bl33-binary>"@0x88000000 \
-C bp.virtioblockdevice.image_path="<path-to>/<file-system-image>"
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment