plat/poplar: migrate to mmc framework

Migrate from emmc framework to mmc framework.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

plat/hisilicon/poplar/bl1_plat_setup.c

@@ -10,9 +10,9 @@
 #include <console.h>
 #include <debug.h>
 #include <dw_mmc.h>
-#include <emmc.h>
 #include <errno.h>
 #include <generic_delay_timer.h>
+#include <mmc.h>
 #include <mmio.h>
 #include <pl061_gpio.h>
 #include <platform.h>
@@ -92,6 +92,7 @@ void bl1_plat_arch_setup(void)
 void bl1_platform_setup(void)
 {
 	int i;
+	struct mmc_device_info info;
 #if !POPLAR_RECOVERY
 	dw_mmc_params_t params = EMMC_INIT_PARAMS(POPLAR_EMMC_DESC_BASE);
 #endif
@@ -105,7 +106,8 @@ void bl1_platform_setup(void)
 #if !POPLAR_RECOVERY
 	/* SoC-specific emmc register are initialized/configured by bootrom */
 	INFO("BL1: initializing emmc\n");
-	dw_mmc_init(&params);
+	info.mmc_dev_type = MMC_IS_EMMC;
+	dw_mmc_init(&params, &info);
 #endif
 
 	plat_io_setup();

plat/hisilicon/poplar/bl2_plat_setup.c

@@ -11,9 +11,9 @@
 #include <debug.h>
 #include <desc_image_load.h>
 #include <dw_mmc.h>
-#include <emmc.h>
 #include <errno.h>
 #include <generic_delay_timer.h>
+#include <mmc.h>
 #include <mmio.h>
 #include <optee_utils.h>
 #include <partition/partition.h>
@@ -333,6 +333,8 @@ void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
 
 void bl2_early_platform_setup(meminfo_t *mem_layout)
 {
+	struct mmc_device_info info;
+
 #if !POPLAR_RECOVERY
 	dw_mmc_params_t params = EMMC_INIT_PARAMS(POPLAR_EMMC_DESC_BASE);
 #endif
@@ -347,7 +349,8 @@ void bl2_early_platform_setup(meminfo_t *mem_layout)
 #if !POPLAR_RECOVERY
 	/* SoC-specific emmc register are initialized/configured by bootrom */
 	INFO("BL2: initializing emmc\n");
-	dw_mmc_init(&params);
+	info.mmc_dev_type = MMC_IS_EMMC;
+	dw_mmc_init(&params, &info);
 #endif
 
 	plat_io_setup();

plat/hisilicon/poplar/include/hi3798cv200.h

@@ -67,11 +67,11 @@
 
 #define EMMC_DESC_SIZE			U(0x00100000) /* 1MB */
 #define EMMC_INIT_PARAMS(base)				\
-	{	.bus_width = EMMC_BUS_WIDTH_8,		\
+	{	.bus_width = MMC_BUS_WIDTH_8,		\
 		.clk_rate = 25 * 1000 * 1000,		\
 		.desc_base = (base),	\
 		.desc_size = EMMC_DESC_SIZE,		\
-		.flags =  EMMC_FLAG_CMD23,		\
+		.flags =  MMC_FLAG_CMD23,		\
 		.reg_base = REG_BASE_MCI,		\
 	}
 

plat/hisilicon/poplar/plat_storage.c

@@ -7,13 +7,13 @@
 #include <arch_helpers.h>
 #include <assert.h>
 #include <debug.h>
-#include <emmc.h>
 #include <firmware_image_package.h>
 #include <io_block.h>
 #include <io_driver.h>
 #include <io_fip.h>
 #include <io_memmap.h>
 #include <io_storage.h>
+#include <mmc.h>
 #include <mmio.h>
 #include <partition/partition.h>
 #include <semihosting.h>
@@ -38,10 +38,10 @@ static const io_block_dev_spec_t emmc_dev_spec = {
 		.length	= POPLAR_EMMC_DATA_SIZE,
 	},
 	.ops		= {
-		.read	= emmc_read_blocks,
-		.write	= emmc_write_blocks,
+		.read	= mmc_read_blocks,
+		.write	= mmc_write_blocks,
 	},
-	.block_size	= EMMC_BLOCK_SIZE,
+	.block_size	= MMC_BLOCK_SIZE,
 };
 #else
 static const io_dev_connector_t *mmap_dev_con;

plat/hisilicon/poplar/platform.mk

@@ -82,7 +82,7 @@ PLAT_BL_COMMON_SOURCES	:=						\
 BL1_SOURCES	+=							\
 		lib/cpus/aarch64/cortex_a53.S				\
 		drivers/arm/pl061/pl061_gpio.c				\
-		drivers/emmc/emmc.c					\
+		drivers/mmc/mmc.c					\
 		drivers/synopsys/emmc/dw_mmc.c				\
 		drivers/io/io_storage.c					\
 		drivers/io/io_block.c					\
@@ -94,7 +94,7 @@ BL1_SOURCES	+=							\
 
 BL2_SOURCES	+=      						\
 		drivers/arm/pl061/pl061_gpio.c				\
-		drivers/emmc/emmc.c					\
+		drivers/mmc/mmc.c					\
 		drivers/synopsys/emmc/dw_mmc.c				\
 		drivers/io/io_storage.c					\
 		drivers/io/io_block.c					\