Skip to content

GitLab

Commit ebc05162 authored by Wendy Liang's avatar Wendy Liang
Browse files

zynqmp: pm_service: use zynqmp_ipi APIs 



Use zynqmp_ipi APIs to access IPI registers in pm_service.
As the zynqmp_ipi APIs doesn't cover IPI buffers, the pm_ipi
in pm_service will still directly access the IPI buffers.
Signed-off-by: default avatarWendy Liang <jliang@xilinx.com>
parent e8ffe79d
Hide whitespace changes
Inline Side-by-side
plat/xilinx/zynqmp/pm_service/pm_api_sys.c
View file @ ebc05162
/*
* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
......@@ -542,7 +542,6 @@ enum pm_ret_status pm_get_chipid(uint32_t *value)
*/
void pm_get_callbackdata(uint32_t *data, size_t count)
{
pm_ipi_buff_read_callb(data, count);
pm_ipi_irq_clear();
pm_ipi_irq_clear(primary_proc);
}
plat/xilinx/zynqmp/pm_service/pm_common.h
View file @ ebc05162
......@@ -21,13 +21,13 @@
/**
* pm_ipi - struct for capturing IPI-channel specific info
* @mask mask for enabling/disabling and triggering the IPI
* @base base address for IPI
* @apu_ipi_id APU IPI agent ID
* @pmu_ipi_id PMU Agent ID
* @buffer_base base address for payload buffer
*/
struct pm_ipi {
const unsigned int mask;
const uintptr_t base;
const uint32_t apu_ipi_id;
const uint32_t pmu_ipi_id;
const uintptr_t buffer_base;
};
......
plat/xilinx/zynqmp/pm_service/pm_ipi.c
View file @ ebc05162
/*
* Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
......@@ -8,28 +8,17 @@
#include <bakery_lock.h>
#include <mmio.h>
#include <platform.h>
#include "../zynqmp_ipi.h"
#include "../zynqmp_private.h"
#include "pm_ipi.h"
/* IPI message buffers */
#define IPI_BUFFER_BASEADDR 0xFF990000U
#define IPI_BUFFER_RPU_0_BASE (IPI_BUFFER_BASEADDR + 0x0U)
#define IPI_BUFFER_RPU_1_BASE (IPI_BUFFER_BASEADDR + 0x200U)
#define IPI_BUFFER_APU_BASE (IPI_BUFFER_BASEADDR + 0x400U)
#define IPI_BUFFER_PL_0_BASE (IPI_BUFFER_BASEADDR + 0x600U)
#define IPI_BUFFER_PL_1_BASE (IPI_BUFFER_BASEADDR + 0x800U)
#define IPI_BUFFER_PL_2_BASE (IPI_BUFFER_BASEADDR + 0xA00U)
#define IPI_BUFFER_PL_3_BASE (IPI_BUFFER_BASEADDR + 0xC00U)
#define IPI_BUFFER_PMU_BASE (IPI_BUFFER_BASEADDR + 0xE00U)
#define IPI_BUFFER_TARGET_RPU_0_OFFSET 0x0U
#define IPI_BUFFER_TARGET_RPU_1_OFFSET 0x40U
#define IPI_BUFFER_TARGET_APU_OFFSET 0x80U
#define IPI_BUFFER_TARGET_PL_0_OFFSET 0xC0U
#define IPI_BUFFER_TARGET_PL_1_OFFSET 0x100U
#define IPI_BUFFER_TARGET_PL_2_OFFSET 0x140U
#define IPI_BUFFER_TARGET_PL_3_OFFSET 0x180U
#define IPI_BUFFER_TARGET_PMU_OFFSET 0x1C0U
#define IPI_BUFFER_MAX_WORDS 8
......@@ -37,75 +26,32 @@
#define IPI_BUFFER_REQ_OFFSET 0x0U
#define IPI_BUFFER_RESP_OFFSET 0x20U
/* IPI Base Address */
#define IPI_BASEADDR 0XFF300000
/* APU's IPI registers */
#define IPI_APU_ISR (IPI_BASEADDR + 0X00000010)
#define IPI_APU_IER (IPI_BASEADDR + 0X00000018)
#define IPI_APU_IDR (IPI_BASEADDR + 0X0000001C)
#define IPI_APU_IXR_PMU_0_MASK (1 << 16)
#define IPI_TRIG_OFFSET 0
#define IPI_OBS_OFFSET 4
/* Power Management IPI interrupt number */
#define PM_INT_NUM 0
#define IPI_PMU_PM_INT_BASE (IPI_PMU_0_TRIG + (PM_INT_NUM * 0x1000))
#define IPI_PMU_PM_INT_MASK (IPI_APU_IXR_PMU_0_MASK << PM_INT_NUM)
#if (PM_INT_NUM < 0 || PM_INT_NUM > 3)
#error PM_INT_NUM value out of range
#endif
#define IPI_APU_MASK 1U
DEFINE_BAKERY_LOCK(pm_secure_lock);
const struct pm_ipi apu_ipi = {
.mask = IPI_APU_MASK,
.base = IPI_BASEADDR,
.apu_ipi_id = IPI_ID_APU,
.pmu_ipi_id = IPI_ID_PMU0,
.buffer_base = IPI_BUFFER_APU_BASE,
};
/**
* pm_ipi_init() - Initialize IPI peripheral for communication with PMU
*
* @proc Pointer to the processor who is initiating request
* @return On success, the initialization function must return 0.
* Any other return value will cause the framework to ignore
* the service
*
* Called from pm_setup initialization function
*/
int pm_ipi_init(void)
int pm_ipi_init(const struct pm_proc *proc)
{
bakery_lock_init(&pm_secure_lock);
/* IPI Interrupts Clear & Disable */
mmio_write_32(IPI_APU_ISR, 0xffffffff);
mmio_write_32(IPI_APU_IDR, 0xffffffff);
ipi_mb_open(proc->ipi->apu_ipi_id, proc->ipi->pmu_ipi_id);
return 0;
}
/**
* pm_ipi_wait() - wait for pmu to handle request
* @proc proc which is waiting for PMU to handle request
*/
static enum pm_ret_status pm_ipi_wait(const struct pm_proc *proc)
{
int status;
/* Wait until previous interrupt is handled by PMU */
do {
status = mmio_read_32(proc->ipi->base + IPI_OBS_OFFSET) &
IPI_PMU_PM_INT_MASK;
/* TODO: 1) Use timer to add delay between read attempts */
/* TODO: 2) Return PM_RET_ERR_TIMEOUT if this times out */
} while (status);
return PM_RET_SUCCESS;
}
/**
* pm_ipi_send_common() - Sends IPI request to the PMU
* @proc Pointer to the processor who is initiating request
......@@ -124,16 +70,13 @@ static enum pm_ret_status pm_ipi_send_common(const struct pm_proc *proc,
IPI_BUFFER_TARGET_PMU_OFFSET +
IPI_BUFFER_REQ_OFFSET;
/* Wait until previous interrupt is handled by PMU */
pm_ipi_wait(proc);
/* Write payload into IPI buffer */
for (size_t i = 0; i < PAYLOAD_ARG_CNT; i++) {
mmio_write_32(buffer_base + offset, payload[i]);
offset += PAYLOAD_ARG_SIZE;
}
/* Generate IPI to PMU */
mmio_write_32(proc->ipi->base + IPI_TRIG_OFFSET, IPI_PMU_PM_INT_MASK);
ipi_mb_notify(proc->ipi->apu_ipi_id, proc->ipi->pmu_ipi_id, 1);
return PM_RET_SUCCESS;
}
......@@ -178,8 +121,6 @@ static enum pm_ret_status pm_ipi_buff_read(const struct pm_proc *proc,
IPI_BUFFER_TARGET_PMU_OFFSET +
IPI_BUFFER_RESP_OFFSET;
pm_ipi_wait(proc);
/*
* Read response from IPI buffer
* buf-0: success or error+reason
......@@ -250,17 +191,12 @@ unlock:
return ret;
}
void pm_ipi_irq_enable(void)
{
mmio_write_32(IPI_APU_IER, IPI_APU_IXR_PMU_0_MASK);
}
void pm_ipi_irq_disable(void)
void pm_ipi_irq_enable(const struct pm_proc *proc)
{
mmio_write_32(IPI_APU_IDR, IPI_APU_IXR_PMU_0_MASK);
ipi_mb_enable_irq(proc->ipi->apu_ipi_id, proc->ipi->pmu_ipi_id);
}
void pm_ipi_irq_clear(void)
void pm_ipi_irq_clear(const struct pm_proc *proc)
{
mmio_write_32(IPI_APU_ISR, IPI_APU_IXR_PMU_0_MASK);
ipi_mb_ack(proc->ipi->apu_ipi_id, proc->ipi->pmu_ipi_id);
}
plat/xilinx/zynqmp/pm_service/pm_ipi.h
View file @ ebc05162
/*
* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
......@@ -9,7 +9,7 @@
#include "pm_common.h"
int pm_ipi_init(void);
int pm_ipi_init(const struct pm_proc *proc);
enum pm_ret_status pm_ipi_send(const struct pm_proc *proc,
uint32_t payload[PAYLOAD_ARG_CNT]);
......@@ -17,8 +17,7 @@ enum pm_ret_status pm_ipi_send_sync(const struct pm_proc *proc,
uint32_t payload[PAYLOAD_ARG_CNT],
unsigned int *value, size_t count);
void pm_ipi_buff_read_callb(unsigned int *value, size_t count);
void pm_ipi_irq_enable(void);
void pm_ipi_irq_disable(void);
void pm_ipi_irq_clear(void);
void pm_ipi_irq_enable(const struct pm_proc *proc);
void pm_ipi_irq_clear(const struct pm_proc *proc);
#endif /* _PM_IPI_H_ */
plat/xilinx/zynqmp/pm_service/pm_svc_main.c
View file @ ebc05162
/*
* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
......@@ -49,22 +49,25 @@ static struct {
*/
int pm_setup(void)
{
int status;
int status, ret;
if (!zynqmp_is_pmu_up())
return -ENODEV;
status = pm_ipi_init();
status = pm_ipi_init(primary_proc);
if (status == 0)
if (status >= 0) {
INFO("BL31: PM Service Init Complete: API v%d.%d\n",
PM_VERSION_MAJOR, PM_VERSION_MINOR);
else
ret = 0;
} else {
INFO("BL31: PM Service Init Failed, Error Code %d!\n", status);
ret = status;
}
pm_down = status;
return status;
return ret;
}
/**
......@@ -163,7 +166,7 @@ uint64_t pm_smc_handler(uint32_t smc_fid, uint64_t x1, uint64_t x2, uint64_t x3,
* Even if we were wrong, it would not enable the IRQ in
* the GIC.
*/
pm_ipi_irq_enable();
pm_ipi_irq_enable(primary_proc);
SMC_RET1(handle, (uint64_t)ret |
((uint64_t)pm_ctx.api_version << 32));
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment