Merge changes Ib9c82b85,Ib348e097,I4dc315e4,I58a8ce44,Iebc03361, ... into integration

* changes:
  plat: marvell: armada: a8k: add OP-TEE OS MMU tables
  drivers: marvell: add support for mapping the entire LLC to SRAM
  plat: marvell: armada: add LLC SRAM CCU setup for AP806/AP807 platforms
  plat: marvell: armada: reduce memory size reserved for FIP image
  plat: marvell: armada: platform definitions cleanup
  plat: marvell: armada: a8k: check CCU window state before loading MSS BL2
  drivers: marvell: add CCU driver API for window state checking
  drivers: marvell: align and extend llc macros
  plat: marvell: a8k: move address config of cp1/2 to BL2
  plat: marvell: armada: re-enable BL32_BASE definition
  plat: marvell: a8k: extend includes to take advantage of the phy_porting_layer
  marvell: comphy: initialize common phy selector for AP mode
  marvell: comphy: update rx_training procedure
  plat: marvell: armada: configure amb for all CPs
  plat: marvell: armada: modify PLAT_FAMILY name for 37xx SoCs

docs/plat/marvell/armada/build.rst

@@ -77,6 +77,13 @@ There are several build options:
 
         Flag defining the LLC (L3) cache state. The cache is enabled by default (``LLC_ENABLE=1``).
 
+- LLC_SRAM
+
+        Flag defining the LLC (L3) cache SRAM support. The feature is
+        disabled by default (``LLC_ENABLE=0``).
+        When LLC SRAM is enabled, the secure payload (BL32) is loaded into this
+        SRAM area instead of the DRAM.
+
 - MARVELL_SECURE_BOOT
 
         Build trusted(=1)/non trusted(=0) image, default is non trusted.

drivers/marvell/cache_llc.c

@@ -31,19 +31,19 @@ void llc_cache_sync(int ap_index)
 
 void llc_flush_all(int ap_index)
 {
-	mmio_write_32(L2X0_CLEAN_INV_WAY(ap_index), LLC_WAY_MASK);
+	mmio_write_32(LLC_CLEAN_INV_WAY(ap_index), LLC_ALL_WAYS_MASK);
 	llc_cache_sync(ap_index);
 }
 
 void llc_clean_all(int ap_index)
 {
-	mmio_write_32(L2X0_CLEAN_WAY(ap_index), LLC_WAY_MASK);
+	mmio_write_32(LLC_CLEAN_WAY(ap_index), LLC_ALL_WAYS_MASK);
 	llc_cache_sync(ap_index);
 }
 
 void llc_inv_all(int ap_index)
 {
-	mmio_write_32(L2X0_INV_WAY(ap_index), LLC_WAY_MASK);
+	mmio_write_32(LLC_INV_WAY(ap_index), LLC_ALL_WAYS_MASK);
 	llc_cache_sync(ap_index);
 }
 
@@ -109,3 +109,41 @@ void llc_runtime_enable(int ap_index)
 	reg |= (0x1 << CCU_SET_POC_OFFSET);
 	mmio_write_32(CCU_HTC_CR(ap_index), reg);
 }
+
+#if LLC_SRAM
+void llc_sram_enable(int ap_index)
+{
+	uint32_t tc, way;
+	uint32_t way_addr;
+
+	/* Lockdown all available ways for all traffic classes */
+	for (tc = 0; tc < LLC_TC_NUM; tc++)
+		mmio_write_32(LLC_TCN_LOCK(ap_index, tc), LLC_WAY_MASK);
+
+	/* Clear the high bits of SRAM address */
+	mmio_write_32(LLC_BANKED_MNT_AHR(ap_index), 0);
+
+	way_addr = PLAT_MARVELL_TRUSTED_RAM_BASE;
+	for (way = 0; way < LLC_WAYS; way++) {
+		/* Trigger allocation block command */
+		mmio_write_32(LLC_BLK_ALOC(ap_index),
+			      LLC_BLK_ALOC_BASE_ADDR(way_addr) |
+			      LLC_BLK_ALOC_WAY_DATA_CLR |
+			      LLC_BLK_ALOC_WAY_ID(way));
+		way_addr += LLC_WAY_SIZE;
+	}
+	llc_enable(ap_index, 1);
+}
+
+void llc_sram_disable(int ap_index)
+{
+	uint32_t tc;
+
+	/* Disable the line lockings */
+	for (tc = 0; tc < LLC_TC_NUM; tc++)
+		mmio_write_32(LLC_TCN_LOCK(ap_index, tc), 0);
+
+	/* Invalidate all ways */
+	llc_inv_all(ap_index);
+}
+#endif /* LLC_SRAM */

drivers/marvell/ccu.c

@@ -54,8 +54,8 @@ static void dump_ccu(int ap_index)
 							      win_id));
 			start = ((uint64_t)alr << ADDRESS_SHIFT);
 			end = (((uint64_t)ahr + 0x10) << ADDRESS_SHIFT);
-			printf("\tccu    %02x     0x%016llx 0x%016llx\n",
-			       target_id, start, end);
+			printf("\tccu%d    %02x     0x%016llx 0x%016llx\n",
+			       win_id, target_id, start, end);
 		}
 	}
 	win_cr = mmio_read_32(CCU_WIN_GCR_OFFSET(ap_index));
@@ -81,6 +81,12 @@ void ccu_win_check(struct addr_map_win *win)
 	}
 }
 
+int ccu_is_win_enabled(int ap_index, uint32_t win_id)
+{
+	return mmio_read_32(CCU_WIN_CR_OFFSET(ap_index, win_id)) &
+			    WIN_ENABLE_BIT;
+}
+
 void ccu_enable_win(int ap_index, struct addr_map_win *win, uint32_t win_id)
 {
 	uint32_t ccu_win_reg;

drivers/marvell/comphy/comphy-cp110.h

@@ -659,18 +659,32 @@
 			(0x3f << HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET)
 
 #define HPIPE_CDR_CONTROL_REG			0x418
-#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET	14
-#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK	\
-			(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET)
-#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET	12
-#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK	\
-			(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
-#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET	9
-#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK		\
-			(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET	0
+#define HPIPE_CRD_MIDPOINT_PHASE_OS_MASK	\
+			(0x3f << HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET)
 #define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET	6
 #define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK		\
 			(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET	9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK		\
+			(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET	12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK	\
+			(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET	14
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK	\
+			(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET)
+
+
+#define HPIPE_CDR_CONTROL1_REG			0x41c
+#define HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF	12
+#define HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_MASK	\
+			(0xf << HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF)
+
+#define HPIPE_CDR_CONTROL2_REG			0x420
+#define HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF	12
+#define HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_MASK	\
+			(0xf << HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF)
 
 #define HPIPE_TX_TRAIN_CTRL_11_REG		0x438
 #define HPIPE_TX_STATUS_CHECK_MODE_OFFSET	6
@@ -749,6 +763,30 @@
 #define HPIPE_DFE_CTRL_28_PIPE4_MASK		\
 			(0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET)
 
+#define HPIPE_TRX0_REG				0x4cc /*in doc 0x133*4*/
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF	2
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_MASK \
+			(0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF)
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF	0
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_C_MASK	\
+			(0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF)
+
+#define HPIPE_TRX_REG1				0x4d0 /*in doc 0x134*4*/
+#define HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF	3
+#define HPIPE_TRX_REG1_MIN_BOOST_MODE_MASK	\
+			(0x1 << HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF)
+#define HPIPE_TRX_REG1_SUMFTAP_EN_OFF		10
+#define HPIPE_TRX_REG1_SUMFTAP_EN_MASK		\
+			(0x3f << HPIPE_TRX_REG1_SUMFTAP_EN_OFF)
+
+#define HPIPE_TRX_REG2				0x4d8 /*in doc 0x136*4*/
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF	11
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK	\
+			(0x1f << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF)
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF	7
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_MASK	\
+			(0xf << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF)
+
 #define HPIPE_G1_SETTING_5_REG			0x538
 #define HPIPE_G1_SETTING_5_G1_ICP_OFFSET	0
 #define HPIPE_G1_SETTING_5_G1_ICP_MASK		\

drivers/marvell/comphy/phy-comphy-cp110.c

@@ -209,8 +209,10 @@ static void mvebu_cp110_comphy_set_phy_selector(uint64_t comphy_base,
 			   * as SFI1/XFI1 available only for CP115.
 			   */
 			if ((mode == COMPHY_SGMII_MODE ||
-			    mode == COMPHY_HS_SGMII_MODE ||
-			    mode == COMPHY_SFI_MODE || mode == COMPHY_XFI_MODE)
+			     mode == COMPHY_HS_SGMII_MODE ||
+			     mode == COMPHY_SFI_MODE ||
+			     mode == COMPHY_XFI_MODE ||
+			     mode == COMPHY_AP_MODE)
 			    && COMPHY_GET_ID(comphy_mode) == 1)
 				reg |= COMMON_SELECTOR_COMPHY4_PORT1 <<
 					comphy_offset;
@@ -2012,12 +2014,58 @@ static int mvebu_cp110_comphy_usb3_power_on(uint64_t comphy_base,
 	return ret;
 }
 
+static void rx_pre_train(uint64_t comphy_base, uint8_t comphy_index)
+{
+	uintptr_t hpipe_addr;
+	uint32_t mask, data;
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+
+	debug("rx_training preparation\n\n");
+
+	mask = HPIPE_TRX0_GAIN_TRAIN_WITH_C_MASK;
+	data = (0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF);
+	mask |= HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_MASK;
+	data |= (0x0 << HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF);
+	reg_set(hpipe_addr + HPIPE_TRX0_REG, data, mask);
+
+
+	mask = HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK;
+	data = (0x1e << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF);
+	mask |= HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_MASK;
+	data |= (0x0 << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF);
+	reg_set(hpipe_addr + HPIPE_TRX_REG2, data, mask);
+
+	mask = HPIPE_TRX_REG1_MIN_BOOST_MODE_MASK;
+	data = (0x1 << HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF);
+	reg_set(hpipe_addr + HPIPE_TRX_REG1, data, mask);
+
+	mask = HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_MASK;
+	data = (0x8 << HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF);
+	reg_set(hpipe_addr + HPIPE_CDR_CONTROL1_REG, data, mask);
+
+	mask = HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_MASK;
+	data = (0x8 << HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF);
+	reg_set(hpipe_addr + HPIPE_CDR_CONTROL2_REG, data, mask);
+
+	mask = HPIPE_CRD_MIDPOINT_PHASE_OS_MASK;
+	data = (0x0 << HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET);
+	reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask);
+
+	mask = HPIPE_TRX_REG1_SUMFTAP_EN_MASK;
+	data = (0x38 << HPIPE_TRX_REG1_SUMFTAP_EN_OFF);
+	mask |= HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK;
+	data |= (0x1e << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF);
+	reg_set(hpipe_addr + HPIPE_TRX_REG1, data, mask);
+}
+
 int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
 					      uint8_t comphy_index)
 {
 	uint32_t mask, data, timeout;
 	uint32_t g1_ffe_cap_sel, g1_ffe_res_sel, align90, g1_dfe_res;
-	uintptr_t hpipe_addr, sd_ip_addr;
+	uintptr_t hpipe_addr;
 
 	uint8_t ap_nr, cp_nr;
 
@@ -2025,30 +2073,10 @@ int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
 
 	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
 				comphy_index);
-	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
-			     comphy_index);
 
 	debug_enter();
 
-	debug("stage: RF Reset\n");
-
-	/* Release from hard reset */
-	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
-	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
-	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
-	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
-	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
-	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
-	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
-	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
-	/* Wait 50ms - until band gap and ref clock ready */
-	mdelay(50);
+	rx_pre_train(comphy_base, comphy_index);
 
 	debug("Preparation for rx_training\n\n");
 
@@ -2068,34 +2096,10 @@ int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
 	data = 0 << HPIPE_DFE_RES_FORCE_OFFSET;
 	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
 
-	debug("PRBS31 loppback\n\n");
-
-	/* Configure PRBS counters */
-	mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
-	data = 0xe << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
-	mask = HPIPE_PHY_TEST_DATA_MASK;
-	data = 0xc4 << HPIPE_PHY_TEST_DATA_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_DATA_REG, data, mask);
-
-	mask = HPIPE_PHY_TEST_EN_MASK;
-	data = 0x1 << HPIPE_PHY_TEST_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
-	mdelay(10);
-	debug("Enable TX/RX training\n\n");
+	debug("Enable RX training\n\n");
 
 	mask = HPIPE_TRX_RX_TRAIN_EN_MASK;
 	data = 0x1 << HPIPE_TRX_RX_TRAIN_EN_OFFSET;
-	mask |= HPIPE_TRX_RX_ANA_IF_CLK_ENE_MASK;
-	data |= 0x1 << HPIPE_TRX_RX_ANA_IF_CLK_ENE_OFFSET;
-	mask |= HPIPE_TRX_TX_CTRL_CLK_EN_MASK;
-	data |= 0x1 << HPIPE_TRX_TX_CTRL_CLK_EN_OFFSET;
-	mask |= HPIPE_TRX_UPDATE_THEN_HOLD_MASK;
-	data |= 0x1 << HPIPE_TRX_UPDATE_THEN_HOLD_OFFSET;
-	mask |= HPIPE_TRX_TX_F0T_EO_BASED_MASK;
-	data |= 0x1 << HPIPE_TRX_TX_F0T_EO_BASED_OFFSET;
 	reg_set(hpipe_addr + HPIPE_TRX_TRAIN_CTRL_0_REG, data, mask);
 
 	/* Check the result of RX training */
@@ -2180,21 +2184,9 @@ int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
 	data = 1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
 	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
 
-	/* Use the value from CAL_OS_PH_EXT */
-	mask = HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK;
-	data = 1 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
-		data, mask);
-
-	/* Update align90 */
-	mask = HPIPE_CAL_OS_PH_EXT_MASK;
-	data = align90 << HPIPE_CAL_OS_PH_EXT_OFFSET;
-	reg_set(hpipe_addr + HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
-		data, mask);
-
 	/* Force DFE resolution (use gen table value) */
 	mask = HPIPE_DFE_RES_FORCE_MASK;
-	data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
+	data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
 	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
 
 	/* 0x111-G1 DFE_Setting_4 */
@@ -2202,38 +2194,6 @@ int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
 	data = g1_dfe_res << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
 	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
 
-	debug("PRBS31 loppback\n\n");
-
-	mask = HPIPE_PHY_TEST_PT_TESTMODE_MASK;
-	data = 0x1 << HPIPE_PHY_TEST_PT_TESTMODE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_OOB_0_REGISTER, data, mask);
-
-	/* Configure PRBS counters */
-	mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
-	data = 0xe << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
-	mask = HPIPE_PHY_TEST_DATA_MASK;
-	data = 0xc4 << HPIPE_PHY_TEST_DATA_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_DATA_REG, data, mask);
-
-	mask = HPIPE_PHY_TEST_EN_MASK;
-	data = 0x1 << HPIPE_PHY_TEST_EN_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
-	/* Reset PRBS error counter */
-	mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
-	data = 0x1 << HPIPE_PHY_TEST_RESET_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
-	mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
-	data = 0x0 << HPIPE_PHY_TEST_RESET_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
-	mask = HPIPE_PHY_TEST_PT_TESTMODE_MASK;
-	data = 0x1 << HPIPE_PHY_TEST_PT_TESTMODE_OFFSET;
-	reg_set(hpipe_addr + HPIPE_PHY_TEST_OOB_0_REGISTER, data, mask);
-
 	printf("########################################################\n");
 	printf("# To use trained values update the ATF sources:\n");
 	printf("# plat/marvell/armada/a8k/<board_type>/board/phy-porting-layer.h ");
@@ -2252,12 +2212,6 @@ int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
 	printf("};\n\n");
 	printf("########################################################\n");
 
-	/* check */
-	debug("PRBS error counter[0x%lx] 0x%x\n\n",
-	      hpipe_addr + HPIPE_PHY_TEST_PRBS_ERROR_COUNTER_1_REG,
-	      mmio_read_32(hpipe_addr +
-			   HPIPE_PHY_TEST_PRBS_ERROR_COUNTER_1_REG));
-
 	rx_trainng_done[ap_nr][cp_nr][comphy_index] = 1;
 
 	return 0;
@@ -2273,12 +2227,16 @@ int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
  * the network registers like: MG, AP, MAC, PCS, Serdes etc.)
  */
 static int mvebu_cp110_comphy_ap_power_on(uint64_t comphy_base,
-					  uint8_t comphy_index)
+					  uint8_t comphy_index,
+					  uint32_t comphy_mode)
 {
 	uint32_t mask, data;
 	uintptr_t comphy_addr = comphy_addr =
 				COMPHY_ADDR(comphy_base, comphy_index);
 
+	/* configure phy selector for XFI/SFI */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+					    comphy_mode);
 	debug_enter();
 	debug("stage: RFU configurations - hard reset comphy\n");
 	/* RFU configurations - hard reset comphy */
@@ -2371,7 +2329,8 @@ int mvebu_cp110_comphy_power_on(uint64_t comphy_base, uint8_t comphy_index,
 						       comphy_mode);
 		break;
 	case (COMPHY_AP_MODE):
-		err = mvebu_cp110_comphy_ap_power_on(comphy_base, comphy_index);
+		err = mvebu_cp110_comphy_ap_power_on(comphy_base, comphy_index,
+						     comphy_mode);
 		break;
 	default:
 		ERROR("comphy%d: unsupported comphy mode\n", comphy_index);

include/drivers/marvell/cache_llc.h

@@ -13,19 +13,35 @@
 #define CACHE_LLC_H
 
 #define LLC_CTRL(ap)			(MVEBU_LLC_BASE(ap) + 0x100)
+#define LLC_SECURE_CTRL(ap)		(MVEBU_LLC_BASE(ap) + 0x10C)
 #define LLC_SYNC(ap)			(MVEBU_LLC_BASE(ap) + 0x700)
-#define L2X0_INV_WAY(ap)		(MVEBU_LLC_BASE(ap) + 0x77C)
-#define L2X0_CLEAN_WAY(ap)		(MVEBU_LLC_BASE(ap) + 0x7BC)
-#define L2X0_CLEAN_INV_WAY(ap)		(MVEBU_LLC_BASE(ap) + 0x7FC)
-#define LLC_TC0_LOCK(ap)		(MVEBU_LLC_BASE(ap) + 0x920)
+#define LLC_BANKED_MNT_AHR(ap)		(MVEBU_LLC_BASE(ap) + 0x724)
+#define LLC_INV_WAY(ap)			(MVEBU_LLC_BASE(ap) + 0x77C)
+#define LLC_BLK_ALOC(ap)		(MVEBU_LLC_BASE(ap) + 0x78c)
+#define LLC_CLEAN_WAY(ap)		(MVEBU_LLC_BASE(ap) + 0x7BC)
+#define LLC_CLEAN_INV_WAY(ap)		(MVEBU_LLC_BASE(ap) + 0x7FC)
+#define LLC_TCN_LOCK(ap, tc)		(MVEBU_LLC_BASE(ap) + 0x920 + 4 * (tc))
 
 #define MASTER_LLC_CTRL			LLC_CTRL(MVEBU_AP0)
-#define MASTER_L2X0_INV_WAY		L2X0_INV_WAY(MVEBU_AP0)
-#define MASTER_LLC_TC0_LOCK		LLC_TC0_LOCK(MVEBU_AP0)
+#define MASTER_LLC_INV_WAY		LLC_INV_WAY(MVEBU_AP0)
+#define MASTER_LLC_TC0_LOCK		LLC_TCN_LOCK(MVEBU_AP0, 0)
 
 #define LLC_CTRL_EN			1
 #define LLC_EXCLUSIVE_EN		0x100
-#define LLC_WAY_MASK			0xFFFFFFFF
+#define LLC_ALL_WAYS_MASK		0xFFFFFFFF
+
+/* AP806/AP807 - 1MB 8-ways LLC */
+#define LLC_WAYS			8
+#define LLC_WAY_MASK			((1 << LLC_WAYS) - 1)
+#define LLC_SIZE			(1024 * 1024)
+#define LLC_WAY_SIZE			(LLC_SIZE / LLC_WAYS)
+#define LLC_TC_NUM			15
+
+#define LLC_BLK_ALOC_WAY_ID(way)	((way) & 0x1f)
+#define LLC_BLK_ALOC_WAY_DATA_DSBL	(0x0 << 6)
+#define LLC_BLK_ALOC_WAY_DATA_CLR	(0x1 << 6)
+#define LLC_BLK_ALOC_WAY_DATA_SET	(0x3 << 6)
+#define LLC_BLK_ALOC_BASE_ADDR(addr)	((addr) & (LLC_WAY_SIZE - 1))
 
 #ifndef __ASSEMBLER__
 void llc_cache_sync(int ap_index);
@@ -36,6 +52,10 @@ void llc_disable(int ap_index);
 void llc_enable(int ap_index, int excl_mode);
 int llc_is_exclusive(int ap_index);
 void llc_runtime_enable(int ap_index);
-#endif
+#if LLC_SRAM
+void llc_sram_enable(int ap_index);
+void llc_sram_disable(int ap_index);
+#endif /* LLC_SRAM */
+#endif /* __ASSEMBLY__ */
 
 #endif /* CACHE_LLC_H */

include/drivers/marvell/ccu.h

@@ -46,6 +46,7 @@ void ccu_dram_win_config(int ap_index, struct addr_map_win *win);
 void ccu_dram_target_set(int ap_index, uint32_t target);
 void ccu_save_win_all(int ap_id);
 void ccu_restore_win_all(int ap_id);
+int ccu_is_win_enabled(int ap_index, uint32_t win_id);
 #endif
 
 #endif /* CCU_H */

include/plat/marvell/armada/a3700/common/board_marvell_def.h → include/plat/marvell/armada/a3k/common/board_marvell_def.h

@@ -71,6 +71,4 @@
 #define MAX_IO_DEVICES			3
 #define MAX_IO_HANDLES			4
 
-#define PLAT_MARVELL_TRUSTED_SRAM_SIZE	0x80000	/* 512 KB */
-
 #endif /* BOARD_MARVELL_DEF_H */

include/plat/marvell/armada/a3700/common/marvell_def.h → include/plat/marvell/armada/a3k/common/marvell_def.h

@@ -49,15 +49,17 @@
  */
 #define MARVELL_LOCAL_STATE_OFF	2
 
+/* This leaves a gap between end of DRAM and start of ROM block */
+#define MARVELL_TRUSTED_DRAM_SIZE	0x80000	/* 512 KB */
+
 /* The first 4KB of Trusted SRAM are used as shared memory */
-#define MARVELL_TRUSTED_SRAM_BASE	PLAT_MARVELL_ATF_BASE
-#define MARVELL_SHARED_RAM_BASE		MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_BASE		PLAT_MARVELL_ATF_BASE
 #define MARVELL_SHARED_RAM_SIZE		0x00001000	/* 4 KB */
 
 /* The remaining Trusted SRAM is used to load the BL images */
 #define MARVELL_BL_RAM_BASE		(MARVELL_SHARED_RAM_BASE + \
 					 MARVELL_SHARED_RAM_SIZE)
-#define MARVELL_BL_RAM_SIZE		(PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+#define MARVELL_BL_RAM_SIZE		(MARVELL_TRUSTED_DRAM_SIZE - \
 					 MARVELL_SHARED_RAM_SIZE)
 
 #define MARVELL_DRAM_BASE		ULL(0x0)
@@ -65,7 +67,7 @@
 #define MARVELL_DRAM_END		(MARVELL_DRAM_BASE + \
 					 MARVELL_DRAM_SIZE - 1)
 
-#define MARVELL_IRQ_SEC_PHY_TIMER		29
+#define MARVELL_IRQ_SEC_PHY_TIMER	29
 
 #define MARVELL_IRQ_SEC_SGI_0		8
 #define MARVELL_IRQ_SEC_SGI_1		9
@@ -86,7 +88,6 @@
 						MARVELL_DRAM_SIZE,	\
 						MT_MEMORY | MT_RW | MT_NS)
 
-
 /*
  * The number of regions like RO(code), coherent and data required by
  * different BL stages which need to be mapped in the MMU.
@@ -173,5 +174,15 @@
 #define BL31_LIMIT			(MARVELL_BL_RAM_BASE +	\
 					 MARVELL_BL_RAM_SIZE)
 
+/*****************************************************************************
+ * BL32 specific defines.
+ *****************************************************************************
+ */
+#define BL32_BASE		PLAT_MARVELL_TRUSTED_RAM_BASE
+#define BL32_LIMIT		(BL32_BASE + PLAT_MARVELL_TRUSTED_RAM_SIZE)
+
+#ifdef SPD_none
+#undef BL32_BASE
+#endif /* SPD_none */
 
 #endif /* MARVELL_DEF_H */

include/plat/marvell/armada/a8k/common/board_marvell_def.h

@@ -71,7 +71,4 @@
 #define MAX_IO_DEVICES			3
 #define MAX_IO_HANDLES			4
 
-#define PLAT_MARVELL_TRUSTED_SRAM_SIZE	0x80000	/* 512 KB */
-
-
 #endif /* BOARD_MARVELL_DEF_H */

include/plat/marvell/armada/a8k/common/marvell_def.h

@@ -47,15 +47,17 @@
  */
 #define MARVELL_LOCAL_STATE_OFF	2
 
+/* This leaves a gap between end of DRAM and start of ROM block */
+#define MARVELL_TRUSTED_DRAM_SIZE	0x80000	/* 512 KB */
+
 /* The first 4KB of Trusted SRAM are used as shared memory */
-#define MARVELL_TRUSTED_SRAM_BASE	PLAT_MARVELL_ATF_BASE
-#define MARVELL_SHARED_RAM_BASE		MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_BASE		PLAT_MARVELL_ATF_BASE
 #define MARVELL_SHARED_RAM_SIZE		0x00001000	/* 4 KB */
 
 /* The remaining Trusted SRAM is used to load the BL images */
 #define MARVELL_BL_RAM_BASE		(MARVELL_SHARED_RAM_BASE +	\
 					 MARVELL_SHARED_RAM_SIZE)
-#define MARVELL_BL_RAM_SIZE		(PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+#define MARVELL_BL_RAM_SIZE		(MARVELL_TRUSTED_DRAM_SIZE - \
 					 MARVELL_SHARED_RAM_SIZE)
 /* Non-shared DRAM */
 #define MARVELL_DRAM_BASE		ULL(0x0)
@@ -75,9 +77,40 @@
 #define MARVELL_IRQ_SEC_SGI_6		14
 #define MARVELL_IRQ_SEC_SGI_7		15
 
-#define MARVELL_MAP_SHARED_RAM		MAP_REGION_FLAT(		\
-						MARVELL_SHARED_RAM_BASE,\
-						MARVELL_SHARED_RAM_SIZE,\
+#ifdef SPD_opteed
+/*
+ * BL2 needs to map 4MB at the end of TZC_DRAM1 in order to
+ * load/authenticate the trusted os extra image. The first 512KB of
+ * TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading
+ * for OPTEE is paged image which only include the paging part using
+ * virtual memory but without "init" data. OPTEE will copy the "init" data
+ * (from pager image) to the first 512KB of TZC_DRAM, and then copy the
+ * extra image behind the "init" data.
+ */
+#define MARVELL_OPTEE_PAGEABLE_LOAD_BASE	\
+					(PLAT_MARVELL_TRUSTED_RAM_BASE + \
+					 PLAT_MARVELL_TRUSTED_RAM_SIZE - \
+					 MARVELL_OPTEE_PAGEABLE_LOAD_SIZE)
+#define MARVELL_OPTEE_PAGEABLE_LOAD_SIZE	0x400000
+#define MARVELL_OPTEE_PAGEABLE_LOAD_MEM		\
+					MAP_REGION_FLAT(		  \
+					MARVELL_OPTEE_PAGEABLE_LOAD_BASE, \
+					MARVELL_OPTEE_PAGEABLE_LOAD_SIZE, \
+					MT_MEMORY | MT_RW | MT_SECURE)
+
+/*
+ * Map the memory for the OP-TEE core (also known as OP-TEE pager when paging
+ * support is enabled).
+ */
+#define MARVELL_MAP_OPTEE_CORE_MEM	MAP_REGION_FLAT(		\
+						BL32_BASE,		\
+						BL32_LIMIT - BL32_BASE,	\
+						MT_MEMORY | MT_RW | MT_SECURE)
+#endif /* SPD_opteed */
+
+#define MARVELL_MAP_SECURE_RAM		MAP_REGION_FLAT(		 \
+						MARVELL_SHARED_RAM_BASE, \
+						MARVELL_SHARED_RAM_SIZE, \
 						MT_MEMORY | MT_RW | MT_SECURE)
 
 #define MARVELL_MAP_DRAM		MAP_REGION_FLAT(		\
@@ -85,7 +118,6 @@
 						MARVELL_DRAM_SIZE,	\
 						MT_MEMORY | MT_RW | MT_NS)
 
-
 /*
  * The number of regions like RO(code), coherent and data required by
  * different BL stages which need to be mapped in the MMU.
@@ -177,5 +209,14 @@
 #define BL31_LIMIT			(MARVELL_BL_RAM_BASE +	\
 					 MARVELL_BL_RAM_SIZE)
 
+/*******************************************************************************
+ * BL32 specific defines.
+ ******************************************************************************/
+#define BL32_BASE		PLAT_MARVELL_TRUSTED_RAM_BASE
+#define BL32_LIMIT		(BL32_BASE + PLAT_MARVELL_TRUSTED_RAM_SIZE)
+
+#ifdef SPD_none
+#undef BL32_BASE
+#endif /* SPD_none */
 
 #endif /* MARVELL_DEF_H */

plat/marvell/armada/a3700/a3700/platform.mk → plat/marvell/armada/a3k/a3700/platform.mk

@@ -5,6 +5,6 @@
 # https://spdx.org/licenses
 #
 
-include plat/marvell/armada/a3700/common/a3700_common.mk
+include plat/marvell/armada/a3k/common/a3700_common.mk
 
 include plat/marvell/armada/common/marvell_common.mk

plat/marvell/armada/a3700/common/a3700_common.mk → plat/marvell/armada/a3k/common/a3700_common.mk

@@ -7,7 +7,7 @@
 
 MARVELL_PLAT_BASE		:= plat/marvell/armada
 MARVELL_PLAT_INCLUDE_BASE	:= include/plat/marvell/armada
-PLAT_FAMILY			:= a3700
+PLAT_FAMILY			:= a3k
 PLAT_FAMILY_BASE		:= $(MARVELL_PLAT_BASE)/$(PLAT_FAMILY)
 PLAT_INCLUDE_BASE		:= $(MARVELL_PLAT_INCLUDE_BASE)/$(PLAT_FAMILY)
 PLAT_COMMON_BASE		:= $(PLAT_FAMILY_BASE)/common