Commit eea5b880 authored by Masahiro Yamada's avatar Masahiro Yamada
Browse files

uniphier: make PSCI related base address configurable



The register base address will be changed in the next SoC. Make it
configurable.

Change-Id: Ibe07bd9db128b0f7e629916cb6ae21ba7984eca9
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent 8d538f3d
......@@ -69,6 +69,8 @@ void uniphier_gic_cpuif_enable(void);
void uniphier_gic_cpuif_disable(void);
void uniphier_gic_pcpu_init(void);
void uniphier_psci_init(unsigned int soc);
unsigned int uniphier_calc_core_pos(u_register_t mpidr);
#endif /* UNIPHIER_H */
......@@ -80,6 +80,8 @@ void bl31_platform_setup(void)
/* Enable and initialize the System level generic timer */
mmio_write_32(cntctl_base + CNTCR_OFF, CNTCR_FCREQ(0U) | CNTCR_EN);
uniphier_psci_init(uniphier_soc);
}
void bl31_plat_arch_setup(void)
......
/*
* Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <arch_helpers.h>
#include <common/debug.h>
#include <errno.h>
......@@ -12,15 +14,18 @@
#include "uniphier.h"
#define UNIPHIER_ROM_RSV0 0x59801200
#define UNIPHIER_ROM_RSV0 0x0
#define UNIPHIER_SLFRSTSEL 0x61843010
#define UNIPHIER_SLFRSTSEL 0x10
#define UNIPHIER_SLFRSTSEL_MASK GENMASK(1, 0)
#define UNIPHIER_SLFRSTCTL 0x61843014
#define UNIPHIER_SLFRSTCTL 0x14
#define UNIPHIER_SLFRSTCTL_RST BIT(0)
#define MPIDR_AFFINITY_INVALID ((u_register_t)-1)
static uintptr_t uniphier_rom_rsv_base;
static uintptr_t uniphier_slfrst_base;
uintptr_t uniphier_sec_entrypoint;
void uniphier_warmboot_entrypoint(void);
......@@ -34,7 +39,7 @@ static int uniphier_psci_pwr_domain_on(u_register_t mpidr)
flush_dcache_range((uint64_t)&uniphier_holding_pen_release,
sizeof(uniphier_holding_pen_release));
mmio_write_64(UNIPHIER_ROM_RSV0,
mmio_write_64(uniphier_rom_rsv_base + UNIPHIER_ROM_RSV0,
(uint64_t)&uniphier_warmboot_entrypoint);
sev();
......@@ -71,8 +76,10 @@ static void __dead2 uniphier_psci_pwr_domain_pwr_down_wfi(
static void uniphier_self_system_reset(void)
{
mmio_clrbits_32(UNIPHIER_SLFRSTSEL, UNIPHIER_SLFRSTSEL_MASK);
mmio_setbits_32(UNIPHIER_SLFRSTCTL, UNIPHIER_SLFRSTCTL_RST);
mmio_clrbits_32(uniphier_slfrst_base + UNIPHIER_SLFRSTSEL,
UNIPHIER_SLFRSTSEL_MASK);
mmio_setbits_32(uniphier_slfrst_base + UNIPHIER_SLFRSTCTL,
UNIPHIER_SLFRSTCTL_RST);
}
static void __dead2 uniphier_psci_system_off(void)
......@@ -114,13 +121,40 @@ static const struct plat_psci_ops uniphier_psci_ops = {
int plat_setup_psci_ops(uintptr_t sec_entrypoint,
const struct plat_psci_ops **psci_ops)
{
unsigned int soc;
uniphier_sec_entrypoint = sec_entrypoint;
flush_dcache_range((uint64_t)&uniphier_sec_entrypoint,
sizeof(uniphier_sec_entrypoint));
soc = uniphier_get_soc_id();
if (soc == UNIPHIER_SOC_UNKNOWN) {
ERROR("unsupported SoC\n");
return -ENOTSUP;
}
*psci_ops = &uniphier_psci_ops;
return 0;
}
struct uniphier_psci_ctrl_base {
uintptr_t rom_rsv_base;
uintptr_t slfrst_base;
};
static const struct uniphier_psci_ctrl_base uniphier_psci_ctrl_base[] = {
[UNIPHIER_SOC_LD11] = {
.rom_rsv_base = 0x59801200,
.slfrst_base = 0x61843000,
},
[UNIPHIER_SOC_LD20] = {
.rom_rsv_base = 0x59801200,
.slfrst_base = 0x61843000,
},
[UNIPHIER_SOC_PXS3] = {
.rom_rsv_base = 0x59801200,
.slfrst_base = 0x61843000,
},
};
void uniphier_psci_init(unsigned int soc)
{
assert(soc < ARRAY_SIZE(uniphier_psci_ctrl_base));
uniphier_rom_rsv_base = uniphier_psci_ctrl_base[soc].rom_rsv_base;
uniphier_slfrst_base = uniphier_psci_ctrl_base[soc].slfrst_base;
if (uniphier_get_boot_master(soc) == UNIPHIER_BOOT_MASTER_SCP) {
uniphier_psci_scp_mode = uniphier_scp_is_running();
......@@ -130,12 +164,4 @@ int plat_setup_psci_ops(uintptr_t sec_entrypoint,
if (uniphier_psci_scp_mode)
uniphier_scp_open_com();
}
uniphier_sec_entrypoint = sec_entrypoint;
flush_dcache_range((uint64_t)&uniphier_sec_entrypoint,
sizeof(uniphier_sec_entrypoint));
*psci_ops = &uniphier_psci_ops;
return 0;
}
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment