docs: marvell: Replace ESPRESSObin-Ultra TF-A build example by full example...

docs: marvell: Replace ESPRESSObin-Ultra TF-A build example by full example how to build production release of Marvell firmware image

ESPRESSObin-Ultra TF-A build example was now just a copy+paste of previous
mentioned example. It produced debug binary with custom log level, which
was not described. So rather replace this duplicate build example by a full
example with all steps how to build production release of Marvell firmware
image for EspressoBin with 1GHz CPU and 1GB DDR4 RAM.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ief1b8bc96a3035ebd8421bd68dca5eb5c8d8fd52

docs/plat/marvell/armada/build.rst

@@ -245,15 +245,24 @@ To build just TF-A without WTMI image (useful for A3720 Turris MOX board), run f
     > make USE_COHERENT_MEM=0 PLAT=a3700 CM3_SYSTEM_RESET=1 BL33=/path/to/u-boot.bin \
         CROSS_COMPILE=aarch64-linux-gnu- mrvl_bootimage
 
-You can build TF-A for the Globalscale ESPRESSObin-Ultra board (DDR4, 1 GB) by running the following command:
+Here is full example how to build production release of Marvell firmware image (concatenated
+binary of Marvell secure firmware, TF-A and U-Boot) for EspressoBin board (PLAT=a3700) with
+1GHz CPU (CLOCKSPRESET=CPU_1000_DDR_800) and 1GB DDR4 RAM (DDR_TOPOLOGY=5):
 
 .. code:: shell
 
-    > make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 CLOCKSPRESET=CPU_1200_DDR_750 \
-        MARVELL_SECURE_BOOT=0 DDR_TOPOLOGY=5 BOOTDEV=SPINOR PARTNUM=0 PLAT=a3700 \
-        MV_DDR_PATH=/path/to/mv-ddr-marvell/ WTP=/path/to/A3700-utils-marvell/ \
-        CRYPTOPP_PATH=/path/to/cryptopp/ BL33=/path/to/u-boot.bin \
-        all fip mrvl_bootimage mrvl_flash
+    > git clone https://review.trustedfirmware.org/TF-A/trusted-firmware-a
+    > git clone https://gitlab.denx.de/u-boot/u-boot.git
+    > git clone https://github.com/weidai11/cryptopp.git
+    > git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git -b master
+    > git clone https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git -b master
+    > make -C u-boot CROSS_COMPILE=aarch64-linux-gnu- mvebu_espressobin-88f3720_defconfig u-boot.bin
+    > make -C trusted-firmware-a CROSS_COMPILE=aarch64-linux-gnu- CROSS_CM3=arm-linux-gnueabi- \
+        USE_COHERENT_MEM=0 PLAT=a3700 CLOCKSPRESET=CPU_1000_DDR_800 DDR_TOPOLOGY=5 \
+        MV_DDR_PATH=$PWD/mv-ddr-marvell/ WTP=$PWD/A3700-utils-marvell/ CRYPTOPP_PATH=$PWD/cryptopp/ \
+        BL33=$PWD/u-boot/u-boot.bin mrvl_flash
+
+Produced Marvell firmware flash image: ``trusted-firmware-a/build/a3700/release/flash-image.bin``
 
 Special Build Flags
 --------------------