GitLab

The printf() isn't used by the firmware itself, just by the tools under
the ./tools/ folder. Then tf_printf will unconditionally print.
Remove the unused print_dram_status_info() function.

Change-Id: Ie699ccb54a5be9a2cbbd7b8d4193b57075a2f57a
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

This patch switches to the functions which identify the underlying
platform in order to calculate the chip SKU.

Change-Id: I20cf5623465289ccfab28d6578efcf762bfeb456
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch runs the MCE firmware's version check only if the underlying
platform has the capability to the run the firmware. MCE firmware is not
running on simulation platforms, identified by v0.3 or v0.6, read from the
Tegra Chip ID value.

Change-Id: I3b1788b1ee2a0d4464017bb879ac5792cb7022b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch uses helper functions to read the chips's major and minor
version values.

Change-Id: I5b2530a31af5ab3778a8aa63380def4e9f9ee6ec
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds all the UART controllers to the memory map.

Change-Id: I035e55ca7bff0a96115102f2295981f9e3a5da6b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Commit f3d3b316

 replaced
plat_get_syscnt_freq by plat_get_syscnt_freq2 on all the
upstream platforms. This patch modifies the Tegra186 code
which is not present usptream, yet.

Change-Id: Ieda6168050a7769680a3a94513637fed03463a2d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch disables TCU prefetch for all the contexts in order
to improve SMMU performance.

Change-Id: I82ca49a0e396d9f064f5c62a5f00c4b2101d8459
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch overrides the default handlers to get BL31 arguments from the
previous bootloader. The previous bootloader stores the pointer to the
arguments in PMC secure scratch register #53.

BL31 is the first component running on the CPU, as there isn't a previous
bootloader. We set the RESET_TO_BL31 flag to enable the path which assumes
that there are no input parameters passed by the previous bootloader.

Change-Id: Idacc1df292a70c9c1cb4d5c3a774bd796175d5e8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes duplicate code from the platform's SiP handler
routine for processing Video Memory Carveout region requests and
uses the common SiP handler instead.

Change-Id: Ib307de017fd88d5ed3c816288327cae750a67806
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables the configuration settings for the TZRAM
aperture by programming the base/size of the aperture and
restricting access to it. We allow only the CPU to read/write
by programming the access configuration registers to 0.

Change-Id: Ie16ad29f4c5ec7aafa972b0a0230b4790ad5619e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Commit c073fda1

 upstream changed the
return type for `plat_get_syscnt_freq()` from uint64_t to unsigned
long long.

This patch modifies the return type for the Tegra186 platform.

Change-Id: Ic9e5c364b90972265576e271582a4347e5eaa6eb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables ECC and Parity Protection for Cortex-A57 CPUs during boot,
for Tegra186 A02p SKUs.

Change-Id: I8522a6cb61f5e4fa9e0471f558a0c3ee8078370e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Uncore perfmon appears to the CPU as a set of uncore perfmon registers
which can be read and written using the ARI interface. The MCE code
sequence handles reads and writes to these registers by manipulating
the underlying T186 uncore hardware.

To access an uncore perfmon register, CPU software writes the ARI
request registers to specify

* whether the operation is a read or a write,
* which uncore perfmon register to access,
* the uncore perfmon unit, group, and counter number (if necessary),
* the data to write (if the operation is a write).

It then initiates an ARI request to run the uncore perfmon sequence in
the MCE and reads the resulting value of the uncore perfmon register
and any status information from the ARI response registers.

The NS world's MCE driver issues MCE_CMD_UNCORE_PERFMON_REQ command
for the EL3 layer to start the entire sequence. Once the request
completes, the NS world would receive the command status in the X0
register and the command data in the X1 register.

Change-Id: I20bf2eca2385f7c8baa81e9445617ae711ecceea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements the `get_target_pwr_state` handler for Tegra186
SoCs. The SoC port uses this handler to find out the cluster/system
state during CPU_SUSPEND, CPU_OFF and SYSTEM_SUSPEND calls.

The MCE firmware controls the power state of the CPU/CLuster/System,
so we query it to get the state and act accordingly.

Change-Id: I86633d8d79aec7dcb405d2301ac69910f93110fe
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a helper function to the MCE driver to allow its
clients to issue UPDATE_CSTATE_INFO requests, without having to
setup the CPU context struct.

We introduced a struct to encapsulate the request parameters, that
clients can pass on to the MCE driver. The MCE driver gets the
parameters from the struct and programs the hardware accordingly.

Change-Id: I02bce57506c4ccd90da82127805d6b564375cbf1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Juno platform Makefile is responsible for enabling all the relevant
errata. As the Juno platform port does not know which revision of Juno
the TF
is compiled for, the revision of the cores are unknown and so all errata
up to this date are needed on at least one revision of Juno.

Change-Id: I38e1d6efc17e703f2bd55e0714f8d8fa4778f696
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

This patch resets the CPU power state info when we online any CPU. The
NS world software would re-init the CPU power state after the CPU gets
online anyways. This allows us to maintain proper CPU/cluster power
states in the MCE firmware at all times.

Change-Id: Ib24054f53df720a4f88d67b2cb5a2e036e475e14
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the "Recursion in included headers" error flagged by
Coverity.

Fixes coverity errors "31858: Recursion in included headers" and
"31857: Recursion in included headers"

Change-Id: Icf8838434b1808b396e743e47f59adc452546364
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the logic to calculate the higher bits for TZRAM's base/end
addresses.

Fixes coverity error "31853: Wrong operator used (CONSTANT_EXPRESSION_RESULT)"

Change-Id: Iff62ef18cba59cd41ad63a5c71664872728356a8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch modifies some of the functions in ARM platform layer to cater
for the case when multi-threading `MT` is set in MPIDR. A new build flag
`ARM_PLAT_MT` is added, and when enabled, the functions accessing MPIDR
now assume that the `MT` bit is set for the platform and access the bit
fields accordingly.

Also, a new API plat_arm_get_cpu_pe_count is added when `ARM_PLAT_MT` is
enabled, returning the PE count within the physical cpu corresponding to
`mpidr`.

Change-Id: I04ccf212ac3054a60882761f4087bae299af13cb
Signed-off-by: Summer Qin <summer.qin@arm.com>

This patch fixes the programming logic for the Video memory carveout's
size. The Memory Controller expects the size in terms of MBs instead
of bytes.

Change-Id: Ia8261b737448bae9a435fe21ab336126785d4279
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes stream ID override for the Security Engine
hardware block as its stream ID is programmed by the NS world
driver.

Original change by Mallikarjun Kasoju <mkasoju@nvidia.com>

Change-Id: Ia6523c1a1bb0a82bdeb878feb55670813899bdac
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch resets the power state info for CPUs when onlining,
as we set deepest power when offlining a core but that may not
be requested by non-secure sw which controls idle states. It
will re-init this info from non-secure software when the core
come online.

Original change by Prashant Gaikwad <pgaikwad@nvidia.com>

Change-Id: Id6c2fa2b821c7705aafbb561a62348c36fd3abd8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Tegra simulation environment has limited capabilities. This patch
checks the chip's major and minor versions to decide the features to
enable/disable - MCE firmware version checking is disabled and limited
Memory Controller settings are enabled

Change-Id: I258a807cc3b83cdff14a9975b4ab4f9d1a9d7dcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch checks that the system is running with the supported MCE
firmware during boot. In case the firmware version does not match the
interface header version, then the system halts.

Change-Id: Ib82013fd1c1668efd6f0e4f36cd3662d339ac076
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the programming sequence for 'System Suspend' and
'Quasi power down' state entry. The device needs to update the
required power state before querying the MCE firmware to see the
entry to that power state is allowed.

Original change by Allen Yu <alleny@nvidia.com>

Change-Id: I65e03754322188af913fabf41f29d1c3595afd85
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch programs the default CPU wake mask during CPU_SUSPEND. This
reduces the CPU_SUSPEND latency as the system has to send one less SMC
before issuing the actual suspend request.

Original change by Krishna Sitaraman <ksitaraman@nvidia.com>

Change-Id: I1f9351dde4ab30936070e9f42c2882fa691cbe46
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch clears the system cstate when offlining a CPU core as we
need to update the sytem cstate to SC7 only when we enter system
suspend.

Original change by Prashant Gaikwad <pgaikwad@nvidia.com>

Change-Id: I1cff9bbab4db7d390a491c8939aea5db6c6b5c59
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables overrides for APE domains to allow the chip verification
software harness (MODS) to execute its test cases.

Original change by Harvey Hsieh <hhsieh@nvidia.com>

Change-Id: I09b22376068c5b65d89c2a53154ccb2c60d955bd
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new interface to allow for making an ARI call that
will enable LATIC for the chip verification software harness.

LATIC allows some MINI ISMs to be read in the CCPLEX. The ISMs are
used for various measurements relevant ot particular locations in
Silicon. They are small counters which can be polled to determine
how fast a particular location in the Silicon is.

Original change by Guy Sotomayor <gsotomayor@nvidia.com>

Change-Id: Ifb49b8863a009d4cdd5d1ba38a23b5374500a4b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to save the BL31 state to the TZDRAM
before entering system suspend. The TZRAM loses state during
system suspend and so we need to copy the entire BL31 code to
TZDRAM before entering the state.

In order to restore the state on exiting system suspend, a new
CPU reset handler is implemented which gets copied to TZDRAM
during boot. TO keep things simple we use this same reset handler
for booting secondary CPUs too.

Change-Id: I770f799c255d22279b5cdb9b4d587d3a4c54fad7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch reprograms MSS to make ROC deal with ordering of
MC traffic after boot and system suspend exit. This is needed
as device boots with MSS having all control but POR wants ROC
to deal with the ordering. Performance is expected to improve
with ROC but since no one has really tested the performance,
keep the option configurable for now by introducing a platform
level makefile variable.

Change-Id: I2e782fea138ccf9d281eb043a6b2c3bb97c839a7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.

Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The memory controller loses its settings when the device enters system
suspend state.

This patch adds a handler to restore the Video Memory settings in the
memory controller, which would be called after exiting the system suspend
state.

Change-Id: I1ac12426d7290ac1452983d3c9e05fabbf3327fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a device driver for the SMMU hardware block on
Tegra186 SoCs. We use the generic ARM SMMU-500 IP block on
Tegra186. The driver only supports saving the SMMU settings
before entering system suspend. The MC driver and the NS world
clients take care of programming their own settings.

Change-Id: Iab5a90310ee10f6bc8745451ce50952ab3de7188
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Replace the occurrences of signed condition codes where it was
unnecessary by an unsigned test as the unsigned tests allow the full
range of unsigned values to be used without inverting the result with
some large operands.

This reverts commit ee2c909947e0a9c4a2562689a7bfc863bc4794f9.

Change-Id: Ibaa5e8dfae6ad65bada3cda5f683d181fee37e53
Acked-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

This patch adds support for the SC8 system power off state. This
state keeps the sensor subsystem powered ON while powering down
the remaining parts of the SoC. The CPUs and DRAM are powered down
as part of this state entry and perform a cold boot when exiting SC8.

Change-Id: Iba65c661a7fe077a0d696f114bab3b4595e19a0d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch disables the DCO operations when we turn OFF a
CPU. DCO operations are still ON when a CPU enters a power
down suspend state.

Change-Id: I954a800209ffcc9ab43a77f04040608cbbbd9055
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch registers all the FIQ interrupt sources during platform
setup. Currently we support AON and TOP watchdog timer interrupts.

Change-Id: Ibccd866f00d6b08b574f765538525f95b49c5549
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

For all APE clients (APER, APEW, APEDMAR, APEDMAW) set NO_OVERRIDE
for MC_SID_CFG as ACAST/ADAST will be setup with the required SIDs
ie. 0x7F & 0x1E.

Original change by Nitin Kumbhar <nkumbhar@nvidia.com>

Change-Id: Idec981b3537cc95dac6ec37cdaa38bc45b16d232
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>