- 02 Sep, 2019 7 commits
-
-
Yann Gautier authored
The runtime console is only kept in DEBUG configuration. Change-Id: I0447dfcacb9a63a12bcdab7c55584d70c3220e5b Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
This change enhances performance and security in BL32 stage. Change-Id: I64df5995fc6b04f6cf42d6a00a6d3d0f602b5407 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
This change enables LpDDR3 initialization with PMIC. Change-Id: I2409a808335dfacd69a8517cb8510cee98bb8161 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Among the variants of STM32MP, the STM32MP151 is a single Cortex-A7 chip. A function is added to check the part number of the SoC. If it corresponds to STM32MP151A or STM32MP151C, then the chip has a single Cortex-A7. Change-Id: Icac2015c5d03ce0bcb8e99bbaf1ec8ada34be49c Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
-
Yann Gautier authored
On STMicroelectronics boards, the board information is stored in OTP. This OTP is described in device tree, in BSEC board_id node. Change-Id: Ieccbdcb048343680faac8dc577b75c67ac106f5b Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
-
Yann Gautier authored
This information is located in DBGMCU registers. Change-Id: I480aa046fed9992e3d9665b1f0520bc4b6cfdf30 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Introduce driver for STM32 IWDG peripheral (Independent Watchdog). It is configured according to device tree content and should be enabled from there. The watchdog is not started by default. It can be started after an HW reset if the dedicated OTP is fused. The watchdog also needs to be frozen if a debugger is attached. This is done by configuring the correct bits in DBGMCU. This configuration is allowed by checking BSEC properties. An increase of BL2 size is also required when adding this new code. Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
- 01 Aug, 2019 1 commit
-
-
Julius Werner authored
NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__. All common C compilers predefine a macro called __ASSEMBLER__ when preprocessing a .S file. There is no reason for TF-A to define it's own __ASSEMBLY__ macro for this purpose instead. To unify code with the export headers (which use __ASSEMBLER__ to avoid one extra dependency), let's deprecate __ASSEMBLY__ and switch the code base over to the predefined standard. Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417 Signed-off-by: Julius Werner <jwerner@chromium.org>
-
- 28 Jun, 2019 1 commit
-
-
Ambroise Vincent authored
The new API becomes the default one. Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
- 17 Jun, 2019 6 commits
-
-
Yann Gautier authored
Change-Id: Idee966b6434aa038e54b6e7176749a7b65bdbe84 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Correct SDMMC macros to define unsigned values as expected by the driver implementation. Change-Id: Ib009f3df2cf26a9759d129eb571a27b2564770ce Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Remove inclusion of libfdt source files in source file list since these are already included from generic libfdt.mk makefile. Change-Id: If42624557c4d88ca85d70f83b1b08c58f50afe72 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
The system configuration controller is mainly used to manage the compensation cell and other IOs and system related settings. The SYSCFG driver is in charge of configuring masters on the interconnect, IO compensation, low voltage boards, or pull-ups for boot pins. All other configurations should be handled in Linux drivers requiring it. Device tree files are also updated to manage vdd-supply regulator. Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42 Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
GPIOx clocks are specific to each STM32MP platforms. This change moves function stm32_get_gpio_bank_clock() from stm32mp common source files to platform private stm32mp1_private.c source file. Change-Id: I9616c0d3fe4d10af715d6f2d1550c13ab62c829a Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Those functions are generic for parsing nodes from device tree hence could be located in generic source file. The oscillators description structure is also moved to STM32MP1 clock driver, as it is no more used in stm32mp1_clkfunc and cannot be in a generic file. Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 23 Apr, 2019 3 commits
-
-
Yann Gautier authored
Support booting OP-TEE as BL32 boot stage and secure runtime service. OP-TEE executes in internal RAM and uses a secure DDR area to store the pager pagestore. Memory mapping and TZC are configured accordingly prior OP-TEE boot. OP-TEE image is expected in OP-TEE v2 format where a header file describes the effective boot images. This change post processes header file content to get OP-TEE load addresses and set OP-TEE boot arguments. Change-Id: I02ef8b915e4be3e95b27029357d799d70e01cd44 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
-
Yann Gautier authored
This change disables secure accesses to non-secure DDR which are useless. TF-A already maps non-secure memory with non-secure permissions thanks to the MMU. This change also corrects some inline comments. Change-Id: Id4c20c9ee5c95a666dae6b7446ed80baf2d53fb0 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Remove STM32MP_DDR_SPEED_DFLT that is not used in STM32MP1 TF-A code. Change-Id: I780cdc4e93a8a9d997d50f67cfc582acd4a353d6 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 20 Feb, 2019 1 commit
-
-
Yann Gautier authored
STM32MP1 chip embeds a dual Cortex-A7 and a Cortex-M4. The support for Cortex-M4 clocks is added when configuring the clock tree. Some minimal security features to allow communications between A7 and M4 are also added. Change-Id: I60417e244a476f60a2758f4969700b2684056665 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 14 Feb, 2019 7 commits
-
-
Yann Gautier authored
Remove useless private structure in function prototypes. Add a reference counter on clocks. Prepare for future secured/shared/non-secured clocks. Change-Id: I3dbed81721da5ceff5e10b2c4155b1e340c036ee Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
-
Yann Gautier authored
PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree. Platform asserts the value read from the DT are the SoC addresses. Change-Id: I43f0890b51918a30c87ac067d3780ab27a0f59de Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Create a new file stm32mp_clkfunc.c to put functions that could be common between several platforms. Change-Id: Ica915c796b162b2345056b33328acc05035a242c Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Regulator configuration at boot takes more information from DT. I2C configuration from DT is done in I2C driver. I2C driver manages more transfer modes. The min voltage of buck1 should also be increased to 1.2V, else the platform does not boot. Heavily modifies stm32_i2c.c since many functions move inside the source file to remove redundant declarations. Change-Id: I0bee5d776cf3ff15e687427cd6abc06ab237d025 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Include all RCC, clocks and reset headers from stm32mp1_def.h which if exported to the firmware through platform_def.h. The same dependency removal is done in common code as well. Some useless includes are also removed in stm32_sdmmc2 driver. Change-Id: I731ea5775c3fdb7f7b0c388b93923ed5e84b8d3f Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions that can be used in drivers shared by different platforms. Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
-
Yann Gautier authored
Some parts of code could be shared with platform derivatives, or new platforms. A new folder plat/st/common is created to put common parts. stm32mp_common.h is a common API aggregate. Remove some casts where applicable. Fix some types where applicable. Remove also some platform includes that are already in stm32mp1_def.h. Change-Id: I46d763c8d9e15732d1ee7383207fd58206d7f583 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
-
- 18 Jan, 2019 8 commits
-
-
Yann Gautier authored
Change-Id: I604b38ffa40e04c6e2aaede28e9f61335bbffdc0 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
This service, called with SMC from Non secure world, allows access to some configurations saved in OTP fuses. Change-Id: I92ba5614b2cb4a03260119e2cf74f2cd626a3431 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
The BSEC (Boot and Security and OTP control) is intended to control an OTP (one time programmable) fuse box, used for on-chip non-volatile storage for device configuration and security parameters. Change-Id: I38c44684c7b9c6a1f24ec0ae3fe99cec481d5a51 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Change-Id: I9c8241d8cd9d95b647c612dd66dd554d5965c2ac Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Change fdt_check_status function to fdt_get_status. Update GPIO defines. Move some functions in gpio driver, instead of dt helper file. Add GPIO bank helper functions. Use only one status field in dt_node_info structure including both status and secure status. Change-Id: I34f93408dd4aac16ae722f564bc3f7d6ae978cf4 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Move print_reset_reason function to bl2_plat_setup.c Put __unused attribute for unused bl2_el3_early_platform_setup args. Rename dt_dev_info to dt_uart_info. Put MMU configuration earlier. Remove unused macros. Use U() or ULL() macros where needed. Use device tree to configure GIC. Use GIC helper function. Change-Id: I34620c421cc6967a668bca318f7689fd74fa78a6 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
-
Yann Gautier authored
This is the correct name of the IP. Rename stm32mp1_pmic files to stm32mp_pmic. Change-Id: I238a7d1f9a1d099daf7788dc9ebbd3146ba2f15f Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
The driver could be used for other devices than PMIC. Change-Id: I4569e7c0028e52e1ff2fe9d38f11de11e95d1897 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 07 Jan, 2019 1 commit
-
-
Yann Gautier authored
Instead, only platform_def.h is included. The required files to be included are added in stm32mp1_def.h. Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 04 Jan, 2019 1 commit
-
-
Antonio Nino Diaz authored
Enforce full include path for includes. Deprecate old paths. The following folders inside include/lib have been left unchanged: - include/lib/cpus/${ARCH} - include/lib/el3_runtime/${ARCH} The reason for this change is that having a global namespace for includes isn't a good idea. It defeats one of the advantages of having folders and it introduces problems that are sometimes subtle (because you may not know the header you are actually including if there are two of them). For example, this patch had to be created because two headers were called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform to avoid collision."). More recently, this patch has had similar problems: 46f9b2c3 ("drivers: add tzc380 support"). This problem was introduced in commit 4ecca339 ("Move include and source files to logical locations"). At that time, there weren't too many headers so it wasn't a real issue. However, time has shown that this creates problems. Platforms that want to preserve the way they include headers may add the removed paths to PLAT_INCLUDES, but this is discouraged. Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 13 Dec, 2018 1 commit
-
-
Yann Gautier authored
On AARCH32, thumb is used by default, no need to redefine it. As all our binaries are compiled with thumb, interwork is not needed. The binaries compiled with or without those flags are the same, except of course for the date. Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 07 Dec, 2018 1 commit
-
-
Julius Werner authored
This patch makes the build system link the console framework code by default, like it already does with other common libraries (e.g. cache helpers). This should not make a difference in practice since TF is linked with --gc-sections, so the linker will garbage collect all functions and data that are not referenced by any other code. Thus, if a platform doesn't want to include console code for size reasons and doesn't make any references to console functions, the code will not be included in the final binary. To avoid compatibility issues with older platform ports, only make this change for the MULTI_CONSOLE_API. Change-Id: I153a9dbe680d57aadb860d1c829759ba701130d3 Signed-off-by: Julius Werner <jwerner@chromium.org>
-
- 04 Dec, 2018 1 commit
-
-
Yann Gautier authored
Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 15 Nov, 2018 1 commit
-
-
Yann Gautier authored
Signed-off-by: Yann Gautier <yann.gautier@st.com>
-