GitLab

* changes:
  plat: tc0: Configure TZC with secure world regions
  plat: tc0: Enable SPMC execution at S-EL2
  plat: tc0: Add TZC DRAM1 region for SPMC and trusted OS
  plat: arm: Make BL32_BASE platform dependent when SPD_spmd is enabled
  plat: tc0: Disable SPE

* changes:
  lib: el3_runtime: Fix SPE system registers in el2_sysregs_context
  lib: el3_runtime: Conditionally save/restore EL2 NEVE registers
  lib: el3_runtime: Fix aarch32 system registers in el2_sysregs_context

The qemu_sbsa platform uses 42bit address size but
the cortex-a53 only supports 40bit addressing, the
cpu is incompatible with the platform.

The aem_generic is also not used with qemu_sbsa, in
fact, the platform currently only properly supports
the cortex-a57 cpu.

Change-Id: I91c92533116f1c3451d01ca99824e91d3d58df14
Signed-off-by: Tomas Pilar <tomas@nuviateam.com>

This includes configuration for SPMC and trusted OS.

Change-Id: Ie24df200f446b3f5b23f5f764b115c7191e6ada3
Signed-off-by: Usama Arif <usama.arif@arm.com>
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

This patch enables SPMC execution at S-EL2 by adding below changes

    - Map TC0_MAP_TZC_DRAM1 for loading SPMC
    - Add details of cactus test secure partitions
    - Adds tc0 spmc manifest file with details on secure partitions
    - Inlcude TOS_FW_CONFIG when SPM is spmd
    - Increases bl2 image size

SPMC at S-EL2 is only enabled when build with SPD=spmd.

Change-Id: I4c5f70911903c232ee8ecca57f1e288d6b1cd647
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

- Reserve 32MB below ARM_AP_TZC_DRAM1_BASE for TC0_TZC_DRAM1
- Add TC0_NS_DRAM1 base and mapping
- Reserve memory region in tc0.dts

Change-Id: If2431f7f68e4255e28c86a0e89637dab7c424a13
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

To support platforms without Trusted DRAM this patch defines
PLAT_ARM_SPMC_BASE and enables platform to use either Trusted DRAM or
DRAM region behind TZC.

Change-Id: Icaa5c7d33334258ff27e8e0bfd0812c304e68ae4
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

Statistical Profiling Extension is not supported by Matterhorn core

Change-Id: Iec652f1c6d6b6a9bf118ba682276a7c70a6abc0d
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

Include EL2 registers related to SPE in EL2 context save/restore
routines if architecture supports it and platform wants to use these
features in Secure world.

Change-Id: Ie01a2c38fa5f6c907276eddec120fdfb222561a6
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

Include EL2 registers related to Nested Virtualization in EL2 context
save/restore routines if architecture supports it and platform wants to
use these features in Secure world.

Change-Id: If006ab83bbc2576488686f5ffdff88b91adced5c
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

AArch64-only platforms do not implement AArch32 at EL1 and higher ELs.
In such cases the build option CTX_INCLUDE_AARCH32_REGS is set to 0.
So don't save/restore aarch32 system registers in el2_sysregs_context
save/restore routines if CTX_INCLUDE_AARCH32_REGS is set to 0.

Change-Id: I229cdd46136c4b4bc9623b02eb444d904e09ce5a
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

* changes:
  plat:qti Mandate SMC implementaion and bug fix
  Update in coreboot_get_memory_type API to include size as well

There are no references to AARCH32, AARCH64 and
__ASSEMBLY__ macros in the TF-A code hence
removed the deprecated information mentioning about
these macros in the document.

Change-Id: I472ab985ca2e4173bae23ff7b4465a9b60bc82eb
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Updated tentative code freeze and release target date
for v2.5 release.

Change-Id: Idcfd9a127e9210846370dfa0685badac5b1c25c7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Updated code freeze and release information date for v2.4
release.

Change-Id: I76d5d04d0ee062a350f6a693eb04c29017d8b2e0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

* changes:
  bl32: add an assert on BL32_SIZE in sp_min.ld.S
  bl32: use SORT_BY_ALIGNMENT macro in sp_min.ld.S

implementation of SMC call SMCCC_ARCH_SOC_ID
adding debugging logs in mem assign call.
Checking range of param in mem_assign call is from CB_MEM_RAM
or CB_MEM_RESERVED.

Change-Id: Iba51bff154df01e02dcb7715582ffaff7beba26e
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>

Change-Id: I3f563cffd58b0591b433c85c0ff6b71e486eb2c8
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>

Without this node, the board fails to boot and panics in the function
stm32mp_init_auth().

Change-Id: Ia54924410dac2a8c94dd6e45d7e93977fe7d87e2
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The board information values, read in an OTP are never negative,
%u is then used instead of %d.

Change-Id: I3bc22401fb4d54666ddf56411f75b79aca738492
Signed-off-by: Yann Gautier <yann.gautier@st.com>

* changes:
  docs: update STM32MP1 with versions details
  stm32mp1: get peripheral base address from a define
  stm32mp1: add finished good variant in board identifier

* changes:
  drivers: stm32_fmc2_nand: fix boundary check for chip select
  drivers: stm32_fmc2_nand: move to new bindings

After introducing the new STM32MP1 SoC versions in patch [1], the
document describing STM32MP1 platform is updated with the information
given in the patch commit message.

 [1]: stm32mp1: add support for new SoC profiles

Change-Id: I6d7ce1a3c29678ddac78a6685f5d5daf28c3c3a1
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Change-Id: I2b702698d6be93da5ac86da1cbc98b3838315a5a
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Update to support new part numbers.

Add new STM32 MPUs Part = STM32MP151F, STM32MP153F, STM32MP157F,
STM32MP151D, STM32MP153D, STM32MP157D

The STM32MP1 series is available in 3 different lines which are pin-to-pin
compatible:
- STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz,
              3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz
              and CAN FD
- STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz

Each line comes with a security option (cryptography & secure boot)
& a Cortex-A frequency option :

- A      Basic + Cortex-A7 @ 650 MHz
- C      Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D      Basic + Cortex-A7 @ 800 MHz
- F      Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz

Remove useless variable in stm32mp_is_single_core().

Change-Id: Id30c836af986c6340c91efa8a7ae9480a2827089
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Add a new revision of STM32MP15x CPU (Rev.Z).

Change-Id: I227dd6d9b3fcc43270015cfb21f60aeb0a8ab658
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b

Update the board info with the new coding including the finished good
variant:

Board: MBxxxx Var<CPN>.<FG> Rev.<Rev>-<BOM>

The OTP 59 coding is:
bit [31:16] (hex) => MBxxxx
bit [15:12] (dec) => Variant CPN (1....15)
bit [11:8]  (dec) => Revision board (index with A = 1, Z = 26)
bit [7:4]   (dec) => Variant FG : finished good (NEW)
bit [3:0]   (dec) => BOM (01, .... 255)

Change-Id: I4fbc0c84596419d1bc30d166311444ece1d9123f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>