GitLab

* changes:
  libc/snprintf: use macro to reduce duplicated code
  libc/snprintf: add support to print "%" character
  libc/printf: add support to print "%" character

To avoid a potential out-of-bounds access, check whether
a device exists on a channel before calling the corresponding
clone function.
Signed-off-by: Zelalem <zelalem.aweke@arm.com>
Change-Id: Ia0dd66b331d3fa8a33109a02369e1bc9ae0fdd5b

* changes:
  plat/arm/css/sgi: Fix assert expression issue
  plat/arm/css/sgi: Fix bl32 receive event - 0xC4000061 issue

Violation of MISRA-C Rule 14.4
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I44ef50dadb54fb056a91f3de962b6e63ba6d7ac4

The issue is that, when interrupt is triggered and RAS handler
is entered, after interrupt handler finishes, TF-A will re-enter
bl32 and then crash.
sdei_dispatch_event() may return failing result in some cases,
for example kernel may not have registered a handler or RAS event
may happen early during boot. We restore the NS context when
sdei_dispatch_event() returns failing result.

error log :
Received delegated event
X0 :  0xC4000061
X1 :  0x0
X2 :  0x0
X3 :  0x0
Received event - 0xC4000061 on cpu 0
UnRecognized Event - 0xC4000061
Failed delegated event 0xC4000061, Status Invalid Parameter
Unhandled Exception in EL3.
x30            = 0x000000000401f700
x0             = 0xfffffffffffffffe
x1             = 0xfffffffffffffffe
x2             = 0x00000000600003c0
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I9802e9a32eee0ac3b5a8bcc0362d0b0e3b71dc9f

* changes:
  doc: renesas: Update RZ/G2 code owner list
  plat: renesas: rzg: DT memory node enhancements
  renesas: rzg: emmc: Enable RZ/G2M support
  plat: renesas: rzg: Add HopeRun HiHope RZ/G2M board support
  drivers: renesas: rzg: Add HiHope RZ/G2M board support
  tools: renesas: Add tool support for RZ/G2 platforms

* changes:
  marvell: uart: a3720: Fix macro name for 6th bit of Status Register
  marvell: uart: a3720: Implement console_a3700_core_getc

* changes:
  qemu/qemu_sbsa: add support for sbsa-ref Embedded Controller
  qemu/qemu_sbsa: topology is different from qemu so add handling
  qemu/common : change DEVICE2 definition for MMU
  qemu/aarch64/plat_helpers.S : calculate the position shift

Some switch cases uses same operation. So, club switch cases
which uses same operation and remove duplicate code.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I260b474c0ff3f2ca102c32d4af2e4abba2b8f57c

Add macro CHECK_AND_PUT_CHAR to check buffer capacity, save one
character to buffer, and then increase character counter by one in one
single statement, so that 4 similar code pieces can be cleaned.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I2add6b4bd6c24ea3c0d2499a44924e3e8db0f4d1

Enable snprintf()/vsnprintf() in TF-A to print "%" character as C
standard, which may be used in platform porting to print percentage
information.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I9b296372a1002046eabac1df5e8eb99a27efd4a8

Enable printf() in TF-A to print "%" character as C standard, which
may be used in platform porting to print percentage information.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I7af2f1d153548e426f423fce15dc48b0da56c622

This allows PSCI in TF-A to signal platform power states to QEMU
via a controller in secure space.

This required a sbsa-ref specific version of PSCI functions for the
platform. Also adjusted the MMU range to also include the new EC.

Add a new MMU region for the embedded controller and increase the
size of xlat tables by one for the new region.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Iece8a88947f11e82ab8988e460a8a66ad175a5ee

sbsa-ref in QEMU creates clusers of 8 cores, it may create up to 512
cores in upto 64 clusters. Implement a qemu_sbsa specific topology file
and increase the BL31_SIZE to accommodate the bigger table sizes. Change
platform_def.h for new topology. Correct PLATFORM_CPU_PER_CLUSTER_SHIFT so
plat_helpers.S calculates correct result.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Idc5d70394c0956b759ad2c86f9fda8f293f2cfa7

DEVICE2 is not currently used on qemu platform but is needed for
a future patch for qemu_sbsa platform. Change its definition to
RW and add it to all levels of arm-tf similar to DEVICE1 definition.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I03495471bfd423b61ad44ec4953fb25f76aa54bf

Rather than re-create this file in multiple qemu variants instead
caclulate the shift needed to convert MPIDR to position.

Add a new PLATFORM_CPU_PER_CLUSTER_SHIFT define in platform_def.h
for both qemu and qemu_sbsa to enable this calculation.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I0e3a86354aa716d95150a3a34b15287cd70c8fd2

The Linux Automation MC-1 is a SBC built around the Octavo Systems
OSD32MP15x SiP. The SiP features up to 1 GB DDR3 RAM, EEPROM and
PMIC. The board has eMMC and a SD slot for storage.

The SDRAM calibration values are taken as is from the DKx boards, which
seem to be suitable for operation at German room temperature.

This is deemed ok for now, but for use in the field, the SiP will likely
need to have its timings determined in a climate chamber.

Change-Id: I5f43a61930151ae9d1df2ea7d0f6f9697c813ce0
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

This patch does not change code, it only updates comments and macro name
for 6th bit of Status Register. So TF-A binary stay same.

6th bit of the Status Register is named TX EMPTY and is set to 1 when both
Transmitter Holding Register (THR) or Transmitter Shift Register (TSR) are
empty. It is when all characters were already transmitted.

There is also TX FIFO EMPTY bit in the Status Register which is set to 1
only when THR is empty.

In both console_a3700_core_init() and console_a3700_core_flush() functions
we should wait until both THR and TSR are empty therefore we should check
6th bit of the Status Register.

So current code is correct, just had misleading macro names and comments.
This change fixes this "documentation" issue, fixes macro name for 6th bit
of the Status Register and also updates comments.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I19e4e7f53a90bcfb318e6dd1b1249b6cbf81c4d3

Implementation is simple, just check if there is a pending character in
RX FIFO via RXRDY bit of Status Register and if yes, read it from
UART_RX_REG register.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I226b6e336f44f5d0ca8dcb68e49a68e8f2f49708

* changes:
  doc: renesas: Update code owner for Renesas platforms
  doc: renesas: Document platforms based on RZ/G2 SoC's
  renesas: rzg: Add PFC support for RZ/G2M
  renesas: rzg: Add QoS support for RZ/G2M
  renesas: rzg: Add support for DRAM initialization

* changes:
  Use preallocated parts of the HASH struct
  Free arguments copied with strdup
  Free keys after use
  Free X509_EXTENSIONs

* changes:
  Workaround for Cortex N1 erratum 1946160
  Workaround for Cortex A78 erratum 1951500

* changes:
  plat: renesas: common: Include ulcb_cpld.h conditionally
  plat: renesas: Move to common
  plat: renesas: aarch64: Move to common
  drivers: renesas: Move ddr/qos/qos header files
  drivers: renesas: rpc: Move to common
  drivers: renesas: avs: Move to common
  drivers: renesas: auth: Move to common
  drivers: renesas: dma: Move to common
  drivers: renesas: watchdog: Move to common
  drivers: renesas: rom: Move to common
  drivers: renesas: delay: Move to common
  drivers: renesas: console: Move to common
  drivers: renesas: pwrc: Move to common
  drivers: renesas: io: Move to common
  drivers: renesas: eMMC: Move to common

* changes:
  drivers: renesas: Move plat common sources
  plat: renesas: Move headers and assembly files to common folder
  plat: renesas: rcar: include: Code cleanup
  plat: renesas:rcar: Fix checkpatch warnings
  plat: renesas: rcar: Fix checkpatch warnings
  plat: renesas:rcar: Code cleanup
  plat: renesas: rcar: Fix coding style

Cortex N1 erratum 1946160 is a Cat B erratum present in r0p0, r1p0,
r2p0, r3p0, r3p1, r4p0, and r4p1.  The workaround is to insert a DMB ST
before acquire atomic instructions without release semantics.  This
issue is present starting from r0p0 but this workaround applies to
revisions r3p0, r3p1, r4p0, and r4p1, for previous revisions there is no
workaround.

SDEN can be found here:
https://documentation-service.arm.com/static/5fa9304cd8dacc30eded464f

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I36e4d6728c275f1c2477dcee9b351077cf7c53e4

Cortex A78 erratum 1951500 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1.  The workaround is to insert a DMB ST before
acquire atomic instructions without release semantics.  This workaround
works on revisions r1p0 and r1p1, in r0p0 there is no workaround.

SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I47610cee75af6a127ea65edc4d5cffc7e6a2d0a3

Add Lad Prabhakar as the code owner for the newly added
RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Ic9bacaf31d653e1e553fa70043053805f56a2b84

Add Marek Vasut as the code owner for the common code shared by
both Renesas R-Car and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I3c0a402f4663ffcf4d2df408a3ccd4d1a8629b3a

Add DT node support for channel 0 where physical memory is split
between 32bit space and 64bit space.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I99a18dbb14cdb54100a836c16445242e430794e3

Document the platforms based on RZ/G2 SoC's.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I9ce5b9df3573b1198c5c7be79b5471d54573609a

Enable eMMC driver support for RZ/G2M SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I34803060c5b592ac24720b11d4a8cd3f9f40caee

Add pin control support for RZ/G2M SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I08719015cab1ec59e2270523980a0a3e26e72c01

The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.

This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I3ed55aa4a2cc5c9d9cd6440e087bcd93186520c7

Add support for HiHope RZ/G2M board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ic8eed0729a42aeee94fc96d16b15b928232488a3

Add tool support for creating bootparam and cert_header images
for RZ/G2 SoC based platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Iab8ba6eda442c8d75f23c5633b8178f86339e4c9