Skip to content

GitLab

Switch branch/tag
  1. 19 Jun, 2017 1 commit
    • Leo Yan's avatar
      plat: Hikey960: fix the CPU hotplug · 0aedca71
      Leo Yan authored 
      

In CPU off callback function, the old code uses the function
hisi_test_pwrdn_allcores() to check if all CPUs in cluster have been
powered off and if it's valid then power off the whole cluster. But the
function hisi_test_pwrdn_allcores() only maintains the different power
states only for CPU suspend/resume flow, so it cannot return correct
states for CPU on/off flow.

This patch is to change use hisi_test_cpu_down() to check if all CPUs
have been powered off, so that can power off the whole cluster properly
when all CPUs in cluster have been hotplugged off.
Signed-off-by: default avatarTao Wang <kevin.wangtao@hisilicon.com>
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      0aedca71
  3. 15 Jun, 2017 3 commits
  5. 13 Jun, 2017 1 commit
  7. 12 Jun, 2017 2 commits
  9. 09 Jun, 2017 1 commit
  11. 08 Jun, 2017 11 commits
  13. 07 Jun, 2017 4 commits
  15. 05 Jun, 2017 2 commits
    • Soby Mathew's avatar
      Add SCMI support for Juno platform · 40111d44
      Soby Mathew authored 
      

This patch adds the memory map region for the SCMI payload memory
and maps the Juno core indices to SCMI power domains via the
`plat_css_core_pos_to_scmi_dmn_id_map` array.

Change-Id: I0d2bb2a719ff5b6a9d8e22e91e1625ab14453665
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      40111d44
    • Soby Mathew's avatar
      CSS: Add SCMI driver for SCP · c04a3b6c
      Soby Mathew authored 
      

This patch adds the SCMI driver for communicating with SCP. The power
domain management and system power management protocol of the SCMI
specification[1] is implemented in the driver. The SCP power management
abstraction layer for SCMI for CSS power management is also added.

A new buid option `CSS_USE_SCMI_DRIVER` is introduced to select SCMI
driver over SCPI.

[1] ARM System Control and Management Interface v1.0 (SCMI)
Document number: ARM DEN 0056A

Change-Id: I67265615a17e679a2afe810b9b0043711ba09dbb
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      c04a3b6c
  17. 01 Jun, 2017 2 commits
    • Jeenu Viswambharan's avatar
      Introduce ARM GIC-600 driver · e1c59ab3
      Jeenu Viswambharan authored 
      

ARM GIC-600 IP complies with ARM GICv3 architecture, but among others,
implements a power control register in the Redistributor frame. This
register must be programmed to mark the frame as powered on, before
accessing other registers in the frame. Rest of initialization sequence
remains the same.

The driver provides APIs for Redistributor power management, and
overrides those in the generic GICv3 driver. The driver data is shared
between generic GICv3 driver and that of GIC-600.

For FVP platform, the GIC-600 driver is chosen when FVP_USE_GIC_DRIVER
is set to FVP_GIC600. Also update user guide.

Change-Id: I321b2360728d69f6d4b0a747b2cfcc3fe5a20d67
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      e1c59ab3
    • David Wang's avatar
      Add support for Cortex-A75 and Cortex-A55 CPUs · d40ab484
      David Wang authored 
      

Both Cortex-A75 and Cortex-A55 CPUs use the ARM DynamIQ Shared Unit
(DSU). The power-down and power-up sequences are therefore mostly
managed in hardware, and required software operations are considerably
simpler.

Change-Id: I68b30e6e1ebe7c041d5e67f39c59f08575fc7ecc
Co-authored-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      d40ab484
  19. 31 May, 2017 4 commits
  21. 24 May, 2017 8 commits
  23. 23 May, 2017 1 commit