GitLab

The Fine Grained Traps (FGT) architecture extension was added to aarch64 in
ARMv8.6. This extension primarily allows hypervisors, at EL2, to trap specific
instructions in a more fine grained manner, with an enable bit for each
instruction. This patch adds support for this extension by enabling the
extension when booting an hypervisor at EL2.

Change-Id: Idb9013ed118b6a1b7b76287237096de992ca4da3
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

This patch enables the v8.6 extension to add a delay before WFE traps
are taken. A weak hook plat_arm_set_twedel_scr_el3 has been added in
plat/common/aarch64/plat_common.c that disables this feature by default
but platform-specific code can override it when needed.

The only hook provided sets the TWED fields in SCR_EL3, there are similar
fields in HCR_EL2, SCTLR_EL2, and SCTLR_EL1 to control WFE trap delays in
lower ELs but these should be configured by code running at EL2 and/or EL1
depending on the platform configuration and is outside the scope of TF-A.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I0a9bb814205efeab693a3d0a0623e62144abba2d

This patch adds EL2 registers that are supported up to ARMv8.6.
ARM_ARCH_MINOR has to specified to enable save/restore routine.

Note: Following registers are still not covered in save/restore.
 * AMEVCNTVOFF0<n>_EL2
 * AMEVCNTVOFF1<n>_EL2
 * ICH_AP0R<n>_EL2
 * ICH_AP1R<n>_EL2
 * ICH_LR<n>_EL2

Change-Id: I4813f3243e56e21cb297b31ef549a4b38d4876e1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0

Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283aa3ce0
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

This patch removes unnecessary header file includes
discovered by Coverity HFA option.

Change-Id: I2827c37c1c24866c87db0e206e681900545925d4
Signed-off-by: Zelalem <zelalem.aweke@arm.com>

The Secure Configuration Register is 64-bits in AArch64 and 32-bits in
AArch32. Use u_register_t instead of unsigned int to reflect this.

Change-Id: I51b69467baba36bf0cfaec2595dc8837b1566934
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Check that entry point information requesting S-EL2
has AArch64 as an execution state during context setup.
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I447263692fed6e55c1b076913e6eb73b1ea735b7

This patch adds support for enabling S-EL2 if this EL is specified in the entry
point information being used to initialise a secure context. It is the caller's
responsibility to check if S-EL2 is available on the system before requesting
this EL through the entry point information.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Change-Id: I2752964f078ab528b2e80de71c7d2f35e60569e1

assert() calls are removed in release builds, and if that assert call is
the only use of a variable, an unused variable warning will be triggered
in a release build. This patch fixes this problem when
CTX_INCLUDE_MTE_REGS by not using an intermediate variable to store the
results of get_armv8_5_mte_support().

Change-Id: I529e10ec0b2c8650d2c3ab52c4f0cecc0b3a670e
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

AArch64 System register SCTLR_EL1[31:0] is architecturally mapped
to AArch32 System register SCTLR[31:0]
AArch64 System register ACTLR_EL1[31:0] is architecturally mapped
to AArch32 System register ACTLR[31:0].

`u_register_t` should be used when it's important to store the
contents of a register in its native size
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I0055422f8cc0454405e011f53c1c4ddcaceb5779

This patch adds support for the new Memory Tagging Extension arriving in
ARMv8.5. MTE support is now enabled by default on systems that support
at EL0. To enable it at ELx for both the non-secure and the secure
world, the compiler flag CTX_INCLUDE_MTE_REGS includes register saving
and restoring when necessary in order to prevent register leakage
between the worlds.

Change-Id: I2d4ea993d6b11654ea0d4757d00ca20d23acf36c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.

Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch enables MTE for Normal world if the CPU suppors it. Enabling
MTE for secure world will be done later.

Change-Id: I9ef64460beaba15e9a9c20ab02da4fb2208b6f7d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

ARMv8.3-PAuth adds functionality that supports address authentication of
the contents of a register before that register is used as the target of
an indirect branch, or as a load.

This feature is supported only in AArch64 state.

This feature is mandatory in ARMv8.3 implementations.

This feature adds several registers to EL1. A new option called
CTX_INCLUDE_PAUTH_REGS has been added to select if the TF needs to save
them during Non-secure <-> Secure world switches. This option must be
enabled if the hardware has the registers or the values will be leaked
during world switches.

To prevent leaks, this patch also disables pointer authentication in the
Secure world if CTX_INCLUDE_PAUTH_REGS is 0. Any attempt to use it will
be trapped in EL3.

Change-Id: I27beba9907b9a86c6df1d0c5bf6180c972830855
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Implicit Error Synchronization Barrier (IESB) might not be correctly
generated in Cortex-A75 r0p0. To prevent this, IESB are enabled at all
expection levels.

Change-Id: I2a1a568668a31e4f3f38d0fba1d632ad9939e5ad
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Corrects typos in core code, documentation files, drivers, Arm
platforms and services.

None of the corrections affect code; changes are limited to comments
and other documentation.

Change-Id: I5c1027b06ef149864f315ccc0ea473e2a16bfd1d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The macro EL_IMPLEMENTED() has been deprecated in favour of the new
function el_implemented().

Change-Id: Ic9b1b81480b5e019b50a050e8c1a199991bf0ca9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

No functional changes.

Change-Id: I2f28f20944f552447ac4e9e755493cd7c0ea1192
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Pointer authentication is an Armv8.3 feature that introduces
instructions that can be used to authenticate and verify pointers.

Pointer authentication instructions are allowed to be accessed from all
ELs but only when EL3 explicitly allows for it; otherwise, their usage
will trap to EL3. Since EL3 doesn't have trap handling in place, this
patch unconditionally disables all related traps to EL3 to avoid
potential misconfiguration leading to an unhandled EL3 exception.

Fixes ARM-software/tf-issues#629

Change-Id: I9bd2efe0dc714196f503713b721ffbf05672c14d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Mark the initialization functions in BL31, such as context management,
EHF, RAS and PSCI as __init so that they can be reclaimed by the
platform when no longer needed

Change-Id: I7446aeee3dde8950b0f410cb766b7a2312c20130
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

This patch fixes a bug in the context management code that causes it to
ignore the HANDLE_EA_EL3_FIRST compile-time option and instead always
configure SCR_EL3 to force all external aborts to trap into EL3. The
code used #ifdef to read compile-time option declared with add_define in
the Makefile... however, those options are always defined, they're just
defined to either 0 or 1, so #if is the correct syntax to check for
them. Also update the documentation to match.

This bug has existed since the Nov 2017 commit 76454abf

 (AArch64:
Introduce External Abort handling), which changed the
HANDLE_EA_EL3_FIRST option to use add_define.

Change-Id: I7189f41d0daee78fa2fcf4066323e663e1e04d3d
Signed-off-by: Julius Werner <jwerner@chromium.org>

Memory Partitioning And Monitoring is an Armv8.4 feature that enables
various memory system components and resources to define partitions.
Software running at various ELs can then assign themselves to the
desired partition to control their performance aspects.

With this patch, when ENABLE_MPAM_FOR_LOWER_ELS is set to 1, EL3 allows
lower ELs to access their own MPAM registers without trapping to EL3.
This patch however doesn't make use of partitioning in EL3; platform
initialisation code should configure and use partitions in EL3 if
required.

Change-Id: I5a55b6771ccaa0c1cffc05543d2116b60cbbcdcd
Co-authored-by: James Morse <james.morse@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

This function can be currently accessed through the wrappers
cm_init_context_by_index() and cm_init_my_context(). However, they only
work on contexts that are associated to a CPU.

By making this function public, it is possible to set up a context that
isn't associated to any CPU. For consistency, it has been renamed to
cm_setup_context().

Change-Id: Ib2146105abc8137bab08745a8adb30ca2c4cedf4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The context management library initialises the CPU context for the
secure/non-secure worlds to zero. This leads to zeros being stored
to the actual registers when we restore the CPU context, during a
world switch. Denver CPUs dont expect zero to be written to the
implementation defined, actlr_el1 register, at any point of time.
Writing a zero to some fields of this register, results in an
UNDEFINED exception.

This patch bases the context actlr_el1 value on the actual hardware
register, to maintain parity with the expected settings

Change-Id: I1c806d7ff12daa7fd1e5c72825494b81454948f2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The ARMv8.4 RAS extensions introduce architectural support for software
to inject faults into the system in order to test fault-handling
software. This patch introduces the build option FAULT_HANDLING_SUPPORT
to allow for lower ELs to use registers in the Standard Error Record to
inject fault. The build option RAS_EXTENSIONS must also be enabled along
with fault injection.

This feature is intended for testing purposes only, and is advisable to
keep disabled for production images.

Change-Id: I6f7a4454b15aec098f9505a10eb188c2f928f7ea
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

When the source code says 'SMCC' it is talking about the SMC Calling
Convention. The correct acronym is SMCCC. This affects a few definitions
and file names.

Some files have been renamed (smcc.h, smcc_helpers.h and smcc_macros.S)
but the old files have been kept for compatibility, they include the
new ones with an ERROR_DEPRECATED guard.

Change-Id: I78f94052a502436fdd97ca32c0fe86bd58173f2f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch adds a new build option, ENABLE_SVE_FOR_NS, which when set
to one EL3 will check to see if the Scalable Vector Extension (SVE) is
implemented when entering and exiting the Non-secure world.

If SVE is implemented, EL3 will do the following:

- Entry to Non-secure world: SIMD, FP and SVE functionality is enabled.

- Exit from Non-secure world: SIMD, FP and SVE functionality is
  disabled. As SIMD and FP registers are part of the SVE Z-registers
  then any use of SIMD / FP functionality would corrupt the SVE
  registers.

The build option default is 1. The SVE functionality is only supported
on AArch64 and so the build option is set to zero when the target
archiecture is AArch32.

This build option is not compatible with the CTX_INCLUDE_FPREGS - an
assert will be raised on platforms where SVE is implemented and both
ENABLE_SVE_FOR_NS and CTX_INCLUDE_FPREGS are set to 1.

Also note this change prevents secure world use of FP&SIMD registers on
SVE-enabled platforms. Existing Secure-EL1 Payloads will not work on
such platforms unless ENABLE_SVE_FOR_NS is set to 0.

Additionally, on the first entry into the Non-secure world the SVE
functionality is enabled and the SVE Z-register length is set to the
maximum size allowed by the architecture. This includes the use case
where EL2 is implemented but not used.

Change-Id: Ie2d733ddaba0b9bef1d7c9765503155188fe7dae
Signed-off-by: David Cunado <david.cunado@arm.com>

The `ENABLE_AMU` build option can be used to enable the
architecturally defined AMU counters.  At present, there is no support
for the auxiliary counter group.

Change-Id: I7ea0c0a00327f463199d1b0a481f01dadb09d312
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Factor out SPE operations in a separate file.  Use the publish
subscribe framework to drain the SPE buffers before entering secure
world.  Additionally, enable SPE before entering normal world.

A side effect of this change is that the profiling buffers are now
only drained when a transition from normal world to secure world
happens.  Previously they were drained also on return from secure
world, which is unnecessary as SPE is not supported in S-EL1.

Change-Id: I17582c689b4b525770dbb6db098b3a0b5777b70a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Factor out extension enabling to a separate function that is called
before exiting from EL3 for first entry into Non-secure world.

Change-Id: Ic21401ebba531134d08643c0a1ca9de0fc590a1b
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Add events that trigger before entry to normal/secure world.  The
events trigger after the normal/secure context has been restored.

Similarly add events that trigger after leaving normal/secure world.
The events trigger after the normal/secure context has been saved.

Change-Id: I1b48a7ea005d56b1f25e2b5313d77e67d2f02bc5
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Currently TF does not initialise the PMCR_EL0 register in
the secure context or save/restore the register.

In particular, the DP field may not be set to one to prohibit
cycle counting in the secure state, even though event counting
generally is prohibited via the default setting of MDCR_EL3.SMPE
to 0.

This patch initialises PMCR_EL0.DP to one in the secure state
to prohibit cycle counting and also initialises other fields
that have an architectually UNKNOWN reset value.

Additionally, PMCR_EL0 is added to the list of registers that are
saved and restored during a world switch.

Similar changes are made for PMCR for the AArch32 execution state.

NOTE: secure world code at lower ELs that assume other values in PMCR_EL0
will be impacted.

Change-Id: Iae40e8c0a196d74053accf97063ebc257b4d2f3a
Signed-off-by: David Cunado <david.cunado@arm.com>

which will cause write_sctlr_el2 use all sctlr_el1 value except the EE bit

The code doesn't "Use SCTLR_EL1.EE value to initialise sctlr_el2"
but, read out SCTLR_EL1 and clear EE bit, then set to sctlr_el2
Signed-off-by: Ken Kuang <ken.kuang@spreadtrum.com>

SPE is only supported in non-secure state.  Accesses to SPE specific
registers from SEL1 will trap to EL3.  During a world switch, before
`TTBR` is modified the SPE profiling buffers are drained.  This is to
avoid a potential invalid memory access in SEL1.

SPE is architecturally specified only for AArch64.

Change-Id: I04a96427d9f9d586c331913d815fdc726855f6b0
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

This patch updates the el3_arch_init_common macro so that it fully
initialises essential control registers rather then relying on hardware
to set the reset values.

The context management functions are also updated to fully initialise
the appropriate control registers when initialising the non-secure and
secure context structures and when preparing to leave EL3 for a lower
EL.

This gives better alignement with the ARM ARM which states that software
must initialise RES0 and RES1 fields with 0 / 1.

This patch also corrects the following typos:

"NASCR definitions" -> "NSACR definitions"

Change-Id: Ia8940b8351dc27bc09e2138b011e249655041cfc
Signed-off-by: David Cunado <david.cunado@arm.com>

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/



Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Replace all instances of checks with the new macro.

Change-Id: I0eec39b9376475a1a9707a3115de9d36f88f8a2a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Replace all use of memset by zeromem when zeroing moderately-sized
structure by applying the following transformation:
memset(x, 0, sizeof(x)) => zeromem(x, sizeof(x))

As the Trusted Firmware is compiled with -ffreestanding, it forbids the
compiler from using __builtin_memset and forces it to generate calls to
the slow memset implementation. Zeromem is a near drop in replacement
for this use case, with a more efficient implementation on both AArch32
and AArch64.

Change-Id: Ia7f3a90e888b96d056881be09f0b4d65b41aa79e
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

One nasty part of ATF is some of boolean macros are always defined
as 1 or 0, and the rest of them are only defined under certain
conditions.

For the former group, "#if FOO" or "#if !FOO" must be used because
"#ifdef FOO" is always true.  (Options passed by $(call add_define,)
are the cases.)

For the latter, "#ifdef FOO" or "#ifndef FOO" should be used because
checking the value of an undefined macro is strange.

Here, IMAGE_BL* is handled by make_helpers/build_macro.mk like
follows:

  $(eval IMAGE := IMAGE_BL$(call uppercase,$(3)))

  $(OBJ): $(2)
          @echo "  CC      $$<"
          $$(Q)$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -D$(IMAGE) -c $$< -o $$@

This means, IMAGE_BL* is defined when building the corresponding
image, but *undefined* for the other images.

So, IMAGE_BL* belongs to the latter group where we should use #ifdef
or #ifndef.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>