GitLab

NXP's i.MX8 SoCs have system controller (M4 core) which takes
control of timer management, including watchdog, srtc and system
counter etc., other clusters like Cortex-A35 can send out command
via MU (Message Unit) to system controller for timer operation.

This patch adds timer IPC(inter-processor communication) support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

synquacer: add SPM support

Move BL1 and BL2 private defines to bl_common.h

make lpuart and imx uart work for debug mode

Correct typographical errors

plat/arm: Fix header dependencies

Enable the deprecated SPM framework for the SynQuacer platform.
It involves creating a memory layout in secure DRAM, and wiring
up the SPM infrastructure so that the secure partition payload
that is loaded into this region by the SCP firmware is dispatched
appropriately.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

The logic that initializes the BL32 entry point data structure
should only be executed if we are in fact loading OP-TEE, and
not if BL32_BASE is set for other reasons (i.e., when enabling
SPM)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

On some systems, it may be preferred to place the secure EL1/0 vector
table outside of the static placement of the BL31 image itself, for
instance when the latter is located in non-shareable SRAM which does
not tolerate inner shareable WBWA mappings (as is the case on SynQuacer)

So permit the platform to #define SPM_SHIM_EXCEPTIONS_VMA in its
supplementary linker script, in which case it will be used as the
VMA region for the vector table. Note that the LMA does not change,
and it is up to the platform to copy the contents to the right place
at init time.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Registered init handlers return a boolean int, not a return code,
so convert the result from the SPM init call before returning it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Permit unaligned accesses while executing the secure partition
payload, so that we don't have to modify existing code that we
will host there. (The UEFI spec explicitly permits unaligned
accesses)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Corrects typos in core code, documentation files, drivers, Arm
platforms and services.

None of the corrections affect code; changes are limited to comments
and other documentation.

Change-Id: I5c1027b06ef149864f315ccc0ea473e2a16bfd1d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

From now on, platform_def.h must include any header with definitions that
are platform-specific (like arm_def.h) and the included headers mustn't
include back platform_def.h, and shouldn't be used by other files. Only
platform_def.h should be included in other files. This will ensure that all
needed definitions are present, rather than needing to include all the
headers in all the definitions' headers just in case.

This also prevents problems like cyclic dependencies.

Change-Id: I9d3cf4d1de4b956fa035c79545222697acdaf5ca
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The definitions in bl1/bl1_private.h and bl2/bl2_private.h are useful for
platforms that may need to access them.

Change-Id: Ifd1880f855ddafcb3bfcaf1ed4a4e0f121eda174
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

build: Support BL-specific build flags

xlat v2: Dynamically detect need for CnP bit

Jh/hikey

maintainers: Add maintainter for NXP i.MX8M platform.

doc: Minor reword & reformatting in readme.rst

With DEBUG_CONSOLE enabled, build will fail for imx8mq platform:

./build/imx8mq/release/bl31/imx8mq_bl31_setup.o:
In function `bl31_early_platform_setup2':
imx8mq_bl31_setup.c:(.text.bl31_early_platform_setup2+0x40):
	undefined reference to `console_uart_register'
Makefile:741: recipe for target 'build/imx8mq/release/bl31/bl31.elf' failed
make: *** [build/imx8mq/release/bl31/bl31.elf] Error 1

Besides, the .console_flush callback needs to be added to avoid
panic when debug mode is enabled, since the console_flush() will
call it without checking whether the function callback is valid.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Current lpuart driver does NOT implement .console_flush callback,
if debug console is enabled, the console_flush() will call the
undefined .console_flush callback(NULL) for lpuart and leak to
panic, this patch adds .console_flush callback to make lpuart work
for debug mode.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

This patch adds me to various maintainer activities in
the ATF tree associated with the NXP i.MX8M platform.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

Improves wording and sentence structure of the readme, including:

- Using "TF-A" in place of "the TF-A" in a couple of places
- "Support for X" in place of "Support X"
- Explicitly naming the Secure Payload Dispatcher when introducing the
  SPD acronym.

Change-Id: I4e7b7e7dc6748f631d07c02d97adcca10ae60ea4
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: I7e0ba692277c1c120c86d47ab966dcd11682428a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Currently the examples of Arm interface standards all include
abbreviationsof the full names, except for SCMI.

Change-Id: I8417ada780d51ecf93426aa5d265c507c7dac08c
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

ARMv8.2-TTCNP is mandatory from ARMv8.2 onwards, but it can be implemented
in CPUs that don't implement all mandatory 8.2 features (and so have to
claim to be a lower version).

This patch removes usage of the ARM_ARCH_AT_LEAST() macro and uses system
ID registers to detect whether it is needed to set the bit or not.

Change-Id: I7bcbf0c7c937590dfc2ca668cfd9267c50f7d52c
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I7194a9a5f0e41308eb3242d20c0d3434f72da591
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

It is cleaner to use the same number of tables regardless of whether
OP-TEE is used or not. This doesn't result in a significant memory
usage increase.

Change-Id: I38bcaa3f2f197c0a352153117592749f189a265c
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

With this patch, each BL image can have its own compiler flags.

Change-Id: Ic9075a20bc6f6dc8a277587b9bee5e062306c090
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

plat: xilinx: code restructure

mmc: increase delay when initializing mmc

pm_service ipi functions can be used by other xilinx
platforms. So move it to common directory. Also change
node_id member type in pm_proc structure so it can be
used for versal where device IDs are used instead of
node IDs.

To accommodate this change header files are re-organized.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

ZynqMP pm_service ipi file uses platform specific macros names.
pm_service ipi functions can be used by other Xilinx platforms
also. Make rename macros to use generic names so that it can be
used by common file.

pm_service ipi functions will be moved to common file in next patch.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Use generic name for pm_api structure member, so that pm_api
structure can be used other Xilinx platforms.

Structure definition will be moved to common file in upcoming
patch.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

ipi_mb functions can be used for other Xilinx platform.
Move it to common file from platform specific files.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

ipi_mb function uses platform specific ipi configuration table.
These ipi_mb functions can be used for other Xilinx platform.
So, instead of using direct data structure, initialize IPI
configuration data by passing platform specific ipi table.
Macros are updated accordingly for this ipi table change.

This change is done so that ipi_mb functions can be moved to
common file without major changes. All common functions now would
be moved to common file in next patch.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Move ipi configuration structure definition to common header file
and rename it to common name, so it can be used for Xilinx specific
other platforms in upcoming changes.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Move zynqmp_ipi.h to platform specific include directory.
Rename it to plat_ipi.h instead of platform name. So, it can
be used to common source files which needs platform specific
data.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Move zynqmp_def.h to platform specific include directory.
Also, update source file to include header file from updated
path of zynqmp_def.h
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Move zynqmp_private.h to platform specific include directory.
Also, rename it to plat_private.h instead of having platform
name. So, it can be used to common source files which needs
platform specific data.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>