GitLab

At present, bl1_arch_setup() and bl31_arch_setup() program the counter
frequency using a value from the memory mapped generic timer. The
generic timer however is not necessarily present on all ARM systems
(although it is architected to be present on all server systems).

This patch moves the timer setup to platform-specific code and updates
the relevant documentation. Also, CNTR.FCREQ is set as the specification
requires the bit corresponding to the counter's frequency to be set when
enabling. Since we intend to use the base frequency, set bit 8.

Fixes ARM-software/tf-issues#24

Change-Id: I32c52cf882253e01f49056f47c58c23e6f422652

If a platform doesn't specify a BLx_SOURCE variable, then building
of the corresponding bootloader isn't attempted. Also allow BL3-3 to
be omitted from the FIP.

Note, this change also removes support for PLAT=all and the 'fip' target
from the 'all' recipe.

Fixes ARM-software/tf-issues#30

Change-Id: Ibdfead0440256eaf364617ecff65290ca6fe6240
Signed-off-by: Jon Medhurst <tixy@linaro.org>

Update the readme.md and change-log.md with release information.

Also, remove the "Detailed changes since last release" section of
the change-log.md since the same information can be found in the
GIT commit messages. Fixes ARM-software/tf-issues#22.

Change-Id: I968cc8aaf588aa5c34ba8f1c12a5b797a46e04f5

Consolidate firmware-design.md and porting-guide.pm so
that recently added sections fit better with
pre-existing sections. Make the documentation more
consistent in use of terminology.

Change-Id: Id87050b096122fbd845189dc2fe1cd17c3003468

1. Add design information on EL3 runtime services and
Secure-EL1 Payload Dispatchers (SPD) to
firmware-design.md.

2. Create new EL3 runtime service writer's guide
(rt-svc-writers-guide.md) to ease creation of new
runtime services.

Change-Id: I670aeb5fc246e25c6e599a15139aac886a0074fd

Move the firmware design documentation out of user-guide.md
and into a new file - firmware-design.md. Reformat the
section headers.

Change-Id: I664815dd47011c7c1cf2202aa4472a8fd78ebb92

1. Update user-guide.md with the latest versions of dependent
components required by the tested configurations of ARM Trusted
Firmware. This includes the tested versions of Fixed Virtual
Platforms (FVPs), toolchain, EFI Development Kit 2(EDK2),
Linux kernel and Linux file system.

2. Remove the instructions to configure the Cortex Base FVP
with the legacy GICv2 memory map as this is no longer supported
since version 5.3 of the Base FVPs.

3. General tidyup of "Using the software" section.

Change-Id: If8264cd29036b59dc5ff435b5f8b1d072dd36ef0

The UART used to be initialised in bl1_platform_setup(). This is too
late because there are some calls to the assert() macro, which needs
to print some messages on the console, before that.

This patch moves the UART initialisation code to
bl1_early_platform_setup().

Fixes ARM-software/tf-issues#49

Change-Id: I98c83a803866372806d2a9c2e1ed80f2ef5b3bcc

This patch adds the following support to the BL3-1 stage:

1. BL3-1 allows runtime services to specify and determine the security
   state of the next image after BL3-1. This has been done by adding
   the `bl31_set_next_image_type()` & `bl31_get_next_image_type()`
   apis. The default security state is non-secure. The platform api
   `bl31_get_next_image_info()` has been modified to let the platform
   decide which is the next image in the desired security state.

2. BL3-1 exports the `bl31_prepare_next_image_entry()` function to
   program entry into the target security state. It uses the apis
   introduced in 1. to do so.

3. BL3-1 reads the information populated by BL2 about the BL3-2 image
   into its internal data structures.

4. BL3-1 introduces a weakly defined reference `bl32_init()` to allow
   initialisation of a BL3-2 image. A runtime service like the Secure
   payload dispatcher will define this function if present.

Change-Id: Icc46dcdb9e475ce6575dd3f9a5dc7a48a83d21d1

This patch adds support for loading a BL3-2 image in BL2. In case a
BL3-2 image is found, it also passes information to BL3-1 about where it
is located and the extents of memory available to it. Information about
memory extents is populated by platform specific code.

The documentation has also been updated to reflect the above changes.

Change-Id: I526b2efb80babebab1318f2b02e319a86d6758b0
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

This patch reworks BL2 to BL3-1 hand over interface by introducing a
composite structure (bl31_args) that holds the superset of information
that needs to be passed from BL2 to BL3-1.

  - The extents of secure memory available to BL3-1
  - The extents of memory available to BL3-2 (not yet implemented) and
    BL3-3
  - Information to execute BL3-2 (not yet implemented) and BL3-3 images

This patch also introduces a new platform API (bl2_get_bl31_args_ptr)
that needs to be implemented by the platform code to export reference to
bl31_args structure which has been allocated in platform-defined memory.

The platform will initialize the extents of memory available to BL3-3
during early platform setup in bl31_args structure. This obviates the
need for bl2_get_ns_mem_layout platform API.

BL2 calls the bl2_get_bl31_args_ptr function to get a reference to
bl31_args structure. It uses the 'bl33_meminfo' field of this structure
to load the BL3-3 image. It sets the entry point information for the
BL3-3 image in the 'bl33_image_info' field of this structure. The
reference to this structure is passed to the BL3-1 image.

Also fixes issue ARM-software/tf-issues#25

Change-Id: Ic36426196dd5ebf89e60ff42643bed01b3500517

This fixes ARM-software/tf-issues#9

Change-Id: Id57037115b8762efc9eaf5ff41887b71d6494c5d

New phony Makefile targets have been added:

 * checkcodebase
 * checkpatch

The checkcodebase target will run a Linux style compliance check over the
entire codebase, and honours the V=1 Makefile verbose setting and so will
show more information when this is enabled.

If the local directory is a git checkout then the output of git ls-files is
used to decide which files to test for compliance.  If the local directory
is not under git control then a 'best attempt' is made, but in this case it
should be noted that it is possible for additional non-codebase files to be
tested, so care should be taken when parsing the output.

The checkpatch target will compare local changes against the git origin/master
to allow issues with the last set of changes to be identified.  To override
the change comparision location, set the BASE_COMMIT variable to your
desired git branch.

Both targets rely on the Linux source tree script checkpatch.pl to do the
syntax checking, and expects that the CHECKPATCH environment variable points
to the location of this file.

Notes on the usage of these targets have been added to the contributing.md
and docs/user-guide.md text files.

Change-Id: I6d73c97af578e24a34226d972afadab9d30f1d8d

The psci implementation does not track target affinity level requests
specified during cpu_suspend calls correctly as per the following
example.

1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0
2. Only the cpu0.cluster0 is powered down while cluster0 remains
   powered up
3. cpu1.cluster0 calls cpu_off to power itself down to highest
   possible affinity level
4. cluster0 will be powered off even though cpu0.cluster0 does not
   allow cluster shutdown

This patch introduces reference counts at affinity levels > 0 to track
the number of cpus which want an affinity instance at level X to
remain powered up. This instance can be turned off only if its
reference count is 0. Cpus still undergo the normal state transitions
(ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be
either ON or OFF depending upon their reference count.

The above issue is thus fixed as follows:

1. cluster0's reference count is incremented by two when cpu0 and cpu1
   are initially powered on.

2. cpu0.cluster0 calls cpu_suspend with the target affinity level as
   0. This does not affect the cluster0 reference count.

3. Only the cpu0.cluster0 is powered down while cluster0 remains
   powered up as it has a non-zero reference count.

4. cpu1.cluster0 call cpu_off to power itself down to highest possible
   affinity level. This decrements the cluster0 reference count.

5. cluster0 is still not powered off since its reference count will at
   least be 1 due to the restriction placed by cpu0.

Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9

The FVP platform has a few filenames that begin with fvp_.  These are
renamed to plat_ to make it easier to use the FVP port as a template.

Change-Id: I601e6256d5ef3bae81a2e1f5df6de56db5b27069
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

Move all explicit platform or architecture specific references
into a new platform.mk file that is defined for each platform.

Change-Id: I9d6320d1ba957e0cc8d9b316b3578132331fa428
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

The GICv3 distributor can have more ports than CPUs are available in
the system. Probe all re-distributors and use the matching affinity
levels as specified by each core and re-distributor to decide which
re-distributor to use with which CPU core.

If a core cannot be matched with a re-distributor, the core panics and
is placed in an endless loop.

Change-Id: Ie393cfe07c7449a2383959e3c968664882e18afc

Traps when accessing architectural features are disabled by clearing bits
in CPTR_EL3 during early boot, including accesses to floating point
registers. The value of this register was previously undetermined, causing
unwanted traps to EL3. Future EL3 code (for example, context save/restore
code) may use floating point registers, although they are not used by current
code.

Also, the '-mgeneral-regs-only' flag is enabled in the GCC settings to
prevent generation of code that uses floating point registers.

Change-Id: I9a03675f6387bbbee81a6f2c9ccf81150db03747

Change-Id: Ic7fb61aabae1d515b9e6baf3dd003807ff42da60

Update documentation to refer to separate issue tracking
repository, https://github.com/ARM-software/tf-issues/issues.

Change-Id: Ib1cef65b0da420bec58290d8743eb069b1226c96

In order to reduce the software dependency on the compiler, the project
is now compiled with the '-ffreestanding' flag. This is to prevent GCC
from replacing functions with more optimised versions. An example is
where GCC replaces a simple printf() with a puts().

Change-Id: I1973fe6957cd708e8432a0039af9d50e037bd884

- Update porting guide to describe where files live and how to get
  FreeBSD source code.
- Update change-log to describe relocation and new functions.

Change-Id: Id8f30cc7bafdd1064b3a5c5aae958c5aa3fb79f3

Platform setup code has to reserve some memory for storing the
memory layout information.  It is populated in early platform setup
code.

blx_get_sec_mem_layout() functions used to return a copy of this
structure.  This patch modifies blx_get_sec_mem_layout() functions
so that they now directly return a pointer to their memory layout
structure.  It ensures that the memory layout returned by
blx_get_sec_mem_layout() is always up-to-date and also avoids a
useless copy of the meminfo structure.

Also rename blx_get_sec_mem_layout() to blx_plat_sec_mem_layout()
to make it clear those functions are platform specific.

Change-Id: Ic7a6f9d6b6236b14865ab48a9f5eff545ce56551

This patch makes changes to the documents to reflect the current
state of play of the psci cpu_suspend function.

Change-Id: I086509fb75111b6e9f93b7f6dbcd33cc4591b9f3

In fvp_affinst_on/suspend, the non-secure entrypoint is always
expected to lie in the DRAM. This check will not be valid if
non-secure code executes directly out of flash e.g. a baremetal
test. This patch removes this check.

Change-Id: I0436e1138fc394aae8ff1ea59ebe38b46a440b61

In the previous psci implementation, the psci_afflvl_power_on_finish()
function would run into an error condition if the value of the context
id parameter in the cpu_on and cpu_suspend psci calls was != 0. The
parameter was being restored as the return value of the affinity level
0 finisher function. A non zero context id would be treated as an
error condition. This would prevent successful wake up of the cpu from
a power down state. Also, the contents of the general purpose
registers were not being cleared upon return to the non-secure world
after a cpu power up. This could potentially allow the non-secure
world to view secure data.

This patch ensures that all general purpose registers are set to ~0
prior to the final eret that drops the execution to the non-secure
world. The context id is used to initialize the general purpose
register x0 prior to re-entry into the non-secure world and is no
longer restored as a function return value. A platform helper
(platform_get_stack()) has been introduced to facilitate this change.

Change-Id: I2454911ffd75705d6aa8609a5d250d9b26fa097c

This patch fixes the following constant values in the psci.h:

1. The affinity level shift value in the power_state parameter of the
   cpu_suspend psci call. The previous value was preventing shutdown
   of the affinity level 1.

2. The values used for affinity state constants (ON, OFF,
   ON_PENDING). They did not match the values expected to be returned
   by the affinity_info psci api as mentioned in the spec.

3. The state id shift value in the power_state parameter of the
   cpu_suspend psci call.

Change-Id: I62ed5eb0e9640b4aa97b93923d6630e6b877a097

The FVP specific code that gets called after a cpu has been physically
powered on after having been turned off or suspended earlier does not
clear the PWRC.PWKUPR.WEN bit. Not doing so causes problems if: a cpu
is suspended, woken from suspend, powered down through a cpu_off call
& receives a spurious interrupt. Since the WEN bit is not cleared
after the cpu woke up from suspend, the spurious wakeup will power the
cpu on. Since the cpu_off call clears the jump address in the mailbox
this spurious wakeup will cause the cpu to crash.

This patch fixes this issue by clearing the WEN bit whenever a cpu is
powered up.

Change-Id: Ic91f5dffe1ed01d76bc7fc807acf0ecd3e38ce5b

- Add instructions for contributing to ARM Trusted Firmware.

- Update copyright text in all files to acknowledge contributors.

Change-Id: I9311aac81b00c6c167d2f8c889aea403b84450e5

This patch updates the user guide section about the memory layout.
  - Explain the verifications that the linker scripts does on the
    global memory layout.
  - Refer to the new linker symbols.
  - Describe the linker symbols exported to the trusted firmware code.

Change-Id: I033ab2b867e8b9776deb4185b9986bcb8218f286

A single binary can be compiled using a command such as:
  make CROSS_COMPILE=aarch64-none-elf- bl1

Also make use of brackets consistent in the Makefile.

Change-Id: I2180fdb473411ef7cffe39670a7b2de82def812e

- Large RAM-disks may have trouble starting with 2GB of memory.
- Increase from 2GB to 4GB in FDT.

Change-Id: I12c1b8e5db41114b88c69c48621cb21247a6a6a7

Any asynchronous exception caused by the firmware should be handled
in the firmware itself.  For this reason, unmask SError exceptions
(and Debug ones as well) on all boot paths.  Also route external
abort and SError interrupts to EL3, otherwise they will target EL1.

Change-Id: I9c191d2d0dcfef85f265641c8460dfbb4d112092

Global and static variables are expected to be initialised to zero
by default.  This is specified by the C99 standard. This patch
removes some unnecessary initialisations of such variables.

It fixes a compilation warning at the same time:
  plat/fvp/bl31_plat_setup.c:82:3: warning: missing braces around
  initializer [-Wmissing-braces]
     section("tzfw_coherent_mem"))) = {0};
     ^
  plat/fvp/bl31_plat_setup.c:82:3: warning: (near initialization for
  ‘ns_entry_info[0]’) [-Wmissing-braces]

Note that GCC should not have emitted this warning message in the
first place.  The C Standard permits braces to be elided around
subaggregate initializers.  See this GCC bug report:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119

Change-Id: I13cb0c344feb9803bca8819f976377741fa6bc35

Change-Id: I4e2a9daa97e3be3d2f53894f2ec7947ba6bb3a16

Change-Id: I5e47ba96e128d3a793517441f5a6c9f2ccbdfc66