GitLab

Add bounds checking asserts to memmap IO driver

Disable secure self-hosted debug

Use DC ZVA instruction to zero memory

Fix minor issues found by cppcheck

Migrate to Linaro Release 16.12

Makefile: use git describe for BUILD_STRING

On Juno, the secure privileged invasive debug authentication signal
(SPIDEN) is controlled by board SCC registers, which by default enable
SPIDEN.  Disable secure privileged external debug in release builds by
programming the appropriate Juno SoC registers.

Change-Id: I61045f09a47dc647bbe95e1b7a60e768f5499f49
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Trusted Firmware currently has no support for secure self-hosted
debug.  To avoid unexpected exceptions, disable software debug
exceptions, other than software breakpoint instruction exceptions,
from all exception levels in secure state.  This applies to both
AArch32 and AArch64 EL3 initialization.

Change-Id: Id097e54a6bbcd0ca6a2be930df5d860d8d09e777
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

cppcheck highlighted variables that were initialized but then later
reassigned.

Change-Id: Ie12742c01fd3bf48b2d6c05a3b448da91d57a2e4
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

The memmap IO driver doesn't perform bounds check when reading, writing,
or seeking. The onus to vet parameters is on the caller, and this patch
asserts that:

  - non-negative size is specified for for backing memory;

  - valid parameters are passed into the driver for read, write and seek
    operations.

Change-Id: I6518c4065817e640e9e7e39a8a4577655f2680f7
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Bug fix and cleanup of cert_create tool

Fiptool cleanup

This Linaro release updates both the binaries and the toolchain:
Linaro binaries upgraded 16.06 --> 16.12
AArch64 compiler upgraded 15.05 (gcc 4.9) --> 5.3-2015.05 (gcc 5.3)
AArch32 compiler upgraded 15.05 (gcc 4.9) --> 5.3-2015.05 (gcc 5.3)

The ARM TF codebase has been tested against these new binaries. This patch
updates the User Guide to reflect that the 16.12 release is now a supported
Linaro Release.

Change-Id: I6247e820f591df7d05df4f622ee45a3abf2c2d72
Signed-off-by: David Cunado <david.cunado@arm.com>

Decouple PSCI stat residency calculation from PMF

Perform stat accounting for retention/standby states also when
requested at multiple power levels.

Change-Id: I2c495ea7cdff8619bde323fb641cd84408eb5762
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

This patch introduces the following three platform interfaces:

* void plat_psci_stat_accounting_start(const psci_power_state_t *state_info)

  This is an optional hook that platforms can implement in order
  to perform accounting before entering a low power state.  This
  typically involves capturing a timestamp.

* void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info)

  This is an optional hook that platforms can implement in order
  to perform accounting after exiting from a low power state.  This
  typically involves capturing a timestamp.

* u_register_t plat_psci_stat_get_residency(unsigned int lvl,
	const psci_power_state_t *state_info,
	unsigned int last_cpu_index)

  This is an optional hook that platforms can implement in order
  to calculate the PSCI stat residency.

If any of these interfaces are overridden by the platform, it is
recommended that all of them are.

By default `ENABLE_PSCI_STAT` is disabled.  If `ENABLE_PSCI_STAT`
is set but `ENABLE_PMF` is not set then an alternative PSCI stat
collection backend must be provided.  If both are set, then default
weak definitions of these functions are provided, using PMF to
calculate the residency.

NOTE: Previously, platforms did not have to explicitly set
`ENABLE_PMF` since this was automatically done by the top-level
Makefile.

Change-Id: I17b47804dea68c77bc284df15ee1ccd66bc4b79b
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Update AEM and Cortex Models versions

These functions are defined above any calls.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We should follow the Linux coding style, which is clearly stated in
the docs/user-guide.mk:

  When making changes to the source for submission to the project,
  the source must be in compliance with the Linux style guide

and Documentation/process/coding-style.rst of Linux Kernel says:

  The limit on the length of lines is 80 columns and this is a
  strongly preferred limit.
     [ snip ]
  However, never break user-visible strings such as printk messages,
  because that breaks the ability to grep for them.

The strings for printf() are user-visible, and can exceed the 80
column limit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The strings in usage functions are sent to stdout by printf(),
but some new lines are sent to stderr by fputc(..., stderr).

This inconsistency will break the usage format when users re-direct
stdout or stderr.  Just use printf() for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

These variables store return values of functions.  Remove all of
meaningless initializers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The ext_new_nvcounter() function calls i2d_ASN1_INTEGER() twice;
the first call to get the return value "sz", and the second one
for writing data into the buffer.  This is actually redundant.
We can do both by one function call.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In the current code, both key_load() and key_create() call key_new()
to allocate a key container (and they do not free it even if they
fail).  If a specific key is not given by the command option,
key_load() fails, then key_create() is called.  At this point, the
key container that has been allocated in key_load() is still alive,
and it is overwritten by a new key container created by key_create().

Move the key_new() call to the main() function to make sure it is
called just once for each descriptor.

While we are here, let's fix one more bug; the error handling code
  ERROR("Malloc error while loading '%s'\n", keys[i].fn);
is wrong because keys[i].fn is NULL pointer unless a specific key is
given by the command option.  This code could be run in either case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

AEMv8-A Model release v8.2 has been made available and Trusted Firmware
has been tested against these versions as part of its CI system. This
patch updates the user guide documentation to reflect the version of AEM
and Cortex Models that Trusted Firmware has been tested against.

Also, the Linaro Release Notes link was broken and this patch updates the
link.

Change-Id: I88729cef909a69fff629036f480fd6168ad7dc9a
Signed-off-by: David Cunado <david.cunado@arm.com>

zynqmp: remove RESET_TO_BL31=1 from build instruction

Replace all use of memset by zeromem when zeroing moderately-sized
structure by applying the following transformation:
memset(x, 0, sizeof(x)) => zeromem(x, sizeof(x))

As the Trusted Firmware is compiled with -ffreestanding, it forbids the
compiler from using __builtin_memset and forces it to generate calls to
the slow memset implementation. Zeromem is a near drop in replacement
for this use case, with a more efficient implementation on both AArch32
and AArch64.

Change-Id: Ia7f3a90e888b96d056881be09f0b4d65b41aa79e
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Introduce zeromem_dczva function on AArch64 that can handle unaligned
addresses and make use of DC ZVA instruction to zero a whole block at a
time. This zeroing takes place directly in the cache to speed it up
without doing external memory access.

Remove the zeromem16 function on AArch64 and replace it with an alias to
zeromem. This zeromem16 function is now deprecated.

Remove the 16-bytes alignment constraint on __BSS_START__ in
firmware-design.md as it is now not mandatory anymore (it used to comply
with zeromem16 requirements).

Change the 16-bytes alignment constraints in SP min's linker script to a
8-bytes alignment constraint as the AArch32 zeromem implementation is now
more efficient on 8-bytes aligned addresses.

Introduce zero_normalmem and zeromem helpers in platform agnostic header
that are implemented this way:
* AArch32:
	* zero_normalmem: zero using usual data access
	* zeromem: alias for zero_normalmem
* AArch64:
	* zero_normalmem: zero normal memory  using DC ZVA instruction
	                  (needs MMU enabled)
	* zeromem: zero using usual data access

Usage guidelines: in most cases, zero_normalmem should be preferred.

There are 2 scenarios where zeromem (or memset) must be used instead:
* Code that must run with MMU disabled (which means all memory is
  considered device memory for data accesses).
* Code that fills device memory with null bytes.

Optionally, the following rule can be applied if performance is
important:
* Code zeroing small areas (few bytes) that are not secrets should use
  memset to take advantage of compiler optimizations.

  Note: Code zeroing security-related critical information should use
  zero_normalmem/zeromem instead of memset to avoid removal by
  compilers' optimizations in some cases or misbehaving versions of GCC.

Fixes ARM-software/tf-issues#408

Change-Id: Iafd9663fc1070413c3e1904e54091cf60effaa82
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

gitignore: ignore GNU GLOBAL tag files

PMF: Fixup PMF constants

RESET_TO_BL31=1 is specified by plat/xilinx/zynqmp/platform.mk with
"override" directive.  So, RESET_TO_BL31=1 is guaranteed without any
operation on users' side.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

GNU GLOBAL (https://www.gnu.org/software/global/

) is source code
tagging system.  It creates 4 tag files (GTAGS, GRTAGS, GSYMS and
GPATH) for the symbol cross-reference.  Ignore them.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, the BUILD_STRING is just 7-digits git hash.  It is true
we can identify which version is running, but we can not get a quick
idea about how new or old it is.

The command "git describe" provides us a bit more useful information
in the format of:
  (tag-name)-(number of commits on top the tag)-g(7 digits hash)

I added some options:
  --always
    Make "git describe" work without any tag in case the upstream
    ATF is cloned, but all the tags are locally dropped.

  --tags
    Use any tag instead of only annotated tags.  In ATF, only some
    tags are annotated, actually the last annotated tag is "v0.2",
    whereas we are on "v1.3" tag now.  This option is needed to get
    something like v1.3-233-gbcc2bf09 instead of v0.2-1713-gbcc2bf09.

  --dirty
    The mark "-dirty" is appended if the source tree is locally
    modified.

With this commit, the welcome string

  NOTICE:  BL1: v1.3(debug):bcc2bf09

will become like follows:

  NOTICE:  BL1: v1.3(debug):v1.3-233-gbcc2bf09

-dirty

While we are here, let's add "2> /dev/null" as well to silently
ignore any error message from git.  We should not assume that users
always work in a git repository; the ATF might be released in a
tarball form instead of a git repository.  In such a case, the git
command will fail, then the ugly message "fatal: Not a git ..." will
be displayed during the build:

$ make CROSS_COMPILE=aarch64-linux-gnu-
fatal: Not a git repository (or any of the parent directories): .git
Building fvp
  CC      drivers/io/io_semihosting.c
  CC      lib/semihosting/semihosting.c
     ...
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

`PMF_ARM_TIF_IMPL_ID` should be set to 0x41.  The code already left
shifts it by 24 bit positions so this was overflowing.

This fixes a build error with GCC 6.2 when
`ENABLE_RUNTIME_INSTRUMENTATION` is set.

Change-Id: I4c99d48ea7ce3d76e9edd1325b1979994db2c0fb
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Errata printing infrastructure

fiptool: Alignment support + misc refactoring

tbbr: Simplify conditional

Add -fno-builtin to CFLAGS

user-guide.md: Fix FVP references

Resolve build errors flagged by GCC 6.2

These are equivalent so use the reduced form.

Change-Id: I40ca097411b9abab69985b8e4dbccf7582eae49e
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>