GitLab

TZSRAM loses power during System suspend, so the entire contents
are copied to TZDRAM before Sysem Suspend entry. The warmboot code
verifies and restores the contents to TZSRAM during System Resume.

This patch removes the code that sets up CPU vector to point to
TZSRAM during System Resume as a result. The trampoline code can
also be completely removed as a result.

Change-Id: I2830eb1db16efef3dfd96c4e3afc41a307588ca1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch disables the code to program reset vector for secondary
CPUs to a different entry point, than cold boot. The cold boot entry
point has the ability to differentiate between a cold boot and a warm
boot, that is controlled by the PROGRAMMABLE_RESET_ADDRESS macro. By
reusing the same entry point, we can lock the CPU reset vector during
cold boot.

Change-Id: Iad400841d57c139469e1d29b5d467197e11958c4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

In SE suspend, switch SE clock source to CLK_M,
to make sure SE clock is on when saving SE context

Change-Id: I57c559825a3ec8e0cc35f7a389afc458a5eed0cb
Signed-off-by: Leo He <leoh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch increases the assert logging level for all Tegra platforms
to VERBOSE, to print the actual assertion condition to the console,
improving debuggability.

Change-Id: If3399bde63fa4261522cab984cc9c49cd2073358
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Platforms that do not support Trusty, usually see error
messages from the Trusty SPD, during boot. This can be
interpreted as a boot failure.

This patch lowers the logging level for those error messages
to avoid confusion.

Change-Id: I931baa2c6db0de1aee17383039bc29ed229a1f25
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables dual execution optimized translations for EL2 and EL3
CPU exception levels.

Change-Id: I28fe98bb05687400f247e94adf44a1f3a85c38b1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates 'plat_my_core_pos' handler to call
'plat_core_pos_from_mpidr' instead of implementing the same logic
at two places.

Change-Id: I1e56adaa10dc2fe3440e5507e0e260d8932e6657
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>

This patch updates the t194_nvg.h header file received from the CPU
team to v6.7.

Change-Id: I5d25dfc60448e14b7085250946bd002fcb80a774
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>

* changes:
  rpi: docs: Update maintainers file to new RPi directory scheme
  rpi: console: Autodetect Mini-UART vs. PL011 configuration
  rpi3: build: Include GPIO driver in all BL stages
  rpi: Allow using PL011 UART for RPi3/RPi4
  rpi3: console: Use same "clock-less" setup scheme as RPi4
  rpi3: gpio: Simplify GPIO setup

Rather than creating entry in plat_arm_mmap array to map the
entire DRAM region in BL31/SP_MIN, only map a smaller region holding
HW_CONFIG DTB. Consequently, an increase in number of sub-translation
tables(level-2 and level-3) i.e., MAX_XLAT_TABLES is necessary to map
the new region in memory.

In order to accommodate the increased code size in BL31 i.e.,
PROGBITS, the max size of BL31 image is increased by 0x1000(4K).

Change-Id: I540b8ee550588e22a3a9fb218183d2ab8061c851
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

With the addition of the Raspberry Pi 4 port the directory structure
changed a bit, also the new port didn't have a separate entry.

Add a new entry for the RPi4 port and adjust the path names.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I04b60e729a19bb0cc3dd6ce6899ec6480356b1f1

The Raspberry Pi has two different UART devices pin-muxed to GPIO 14&15:
One ARM PL011 one and the 8250 compatible "Mini-UART".
A dtoverlay parameter in config.txt will tell the firmware to switch
between the two: it will setup the right clocks and will configure the
pinmuxes accordingly.

To autodetect the user's choice, we read the pinmux register and check
its setting: ALT5 (0x2) means the Mini-UART is used, ALT0 (0x4) points
to the PL011.
Based on that we select the UART driver to initialise.

This will allow console output in any case.

Change-Id: I620d3ce68de6c6576599f2a405636020e1fd1376
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

So far the Raspberry Pi 3 build needs the GPIO driver just for BL2.
Upcoming changes will require some GPIO code in BL1 and BL31 also, so
move those driver files into the common source section.

This does not affect BL31 code size at all, and bl1.bin just increases
by 144 bytes, but doesn't affect the padded binary size at all.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I7639746dc241c1e69099d85d2671c65fa0108555

The Broadcom 283x SoCs feature multiple UARTs: the mostly used
"Mini-UART", which is an 8250 compatible IP, and at least one PL011.
While the 8250 is usually used for serial console purposes, it suffers
from a design flaw, where its clock depends on the VPU clock, which can
change at runtime. This will reliably mess up the baud rate.
To avoid this problem, people might choose to use the PL011 UART for
the serial console, which is pin-mux'ed to the very same GPIO pins.
This can be done by adding "miniuart-bt" to the "dtoverlay=" line in
config.txt.

To prepare for this situation, use the newly gained freedom of sharing
one console_t pointer across different UART drivers, to introduce the
option of choosing the PL011 for the console.

This is for now hard-coded to choose the Mini-UART by default.
A follow-up patch will introduce automatic detection.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I8cf2522151e09ff4ff94a6d396aec6fc4b091a05

In the wake of the upcoming unification of the console setup code
between RPi3 and RPi4, extend the "clock-less" setup scheme to the
RPi3. This avoid programming any clocks or baud rate registers,
which makes the port more robust against GPU firmware changes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ida83a963bb18a878997e9cbd55f8ceac6a2e1c1f

There is really no reason to use and pass around a struct when its only
member is the (fixed) base address.

Remove the struct and just use the base address on its own inside the
GPIO driver. Then set the base address automatically.

This simplifies GPIO setup for users, which now don't need to deal with
zeroing a struct and setting the base address anymore.

Change-Id: I3060f7859e3f8ef9a24cc8fb38307b5da943f127
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Implemented SMCCC_ARCH_SOC_ID call in order to get below
SOC information:

1. SOC revision
2. SOC version

Implementation done using below SMCCC specification document:
https://developer.arm.com/docs/den0028/c

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie0595f1c345a6429a6fb4a7f05534a0ca9c9a48b

This patch introduces the `SPCI_ID_GET` interface which will return the
ID of the calling SPCI component. Returns 0 for requests from the
non-secure world and the SPCI component ID as specified in the manifest
for secure world requests.

Change-Id: Icf81eb1d0e1d7d5c521571e04972b6e2d356e0d1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>

Since commit 3bff910d

 ("Introduce COT
build option"), it is now possible to select a different Chain of Trust
than the TBBR-Client one.

Make a few adjustments in the documentation to reflect that. Also make
some minor improvements (fixing typos, better formatting, ...)  along
the way.

Change-Id: I3bbadc441557e1e13311b6fd053fdab6b10b1ba2
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

The TBBR documentation has been written along with an early
implementation of the code. At that time, the range of supported
encryption and hash algorithms was failry limited. Since then, support
for other algorithms has been added in TF-A but the documentation has
not been updated.

Instead of listing them all, which would clutter this document while
still leaving it at risk of going stale in the future, remove specific
references to the original algorithms and point the reader at the
relevant comprehensive document for further details.

Change-Id: I29dc50bc1d53b728091a1fbaa1c3970fb999f7d5
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

* changes:
  plat/arm/fvp: populate pwr domain descriptor dynamically
  fconf: Extract topology node properties from HW_CONFIG dtb
  fconf: necessary modifications to support fconf in BL31 & SP_MIN
  fconf: enhancements to firmware configuration framework

To accommodate the increasing size of the SCP_BL2 binary, the base
address of the memory region allocated to SCP_BL2 has been moved
downwards from its current (mostly) arbitrary address to the beginning
of the non-shared trusted SRAM.

Change-Id: I086a3765bf3ea88f45525223d765dc0dbad6b434
Signed-off-by: Chris Kay <chris.kay@arm.com>

Add CLCD, HDLCD, PCI and VIRTIO devices as source interfaces for TZC
filter unit to enable DMA for these devices.

Change-Id: Ifad2e56b18605311936e03cfcccda573cac7e60a
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

* changes:
  Tegra210: Remove "unsupported func ID" error msg
  Tegra210: support for secure physical timer
  spd: tlkd: secure timer interrupt handler
  Tegra: smmu: export handlers to read/write SMMU registers
  Tegra: smmu: remove context save sequence
  Tegra: bpmp: fixup TEGRA_CLK_SE values for Tegra186/Tegra194
  Tegra194: memctrl: lock some more MC SID security configs
  Tegra194: add SE support to generate SHA256 of TZRAM
  Tegra194: store TZDRAM base/size to scratch registers
  Tegra194: fix warnings for extra parentheses

The motivation behind this patch and following patches is to extract
information about the platform in runtime rather than depending on
compile time macros such as FVP_CLUSTER_COUNT. This partially enables
us to use a single binary for a family of platforms which all have
similar hardware capabilities but differ in configurations.

we populate the data structure describing the power domain hierarchy
of the platform dynamically by querying the number of clusters and cpus
using fconf getter APIs. Compile time macro such as FVP_CLUSTER_COUNT
is still needed as it determines the size of related data structures.

Note that the cpu-map node in HW_CONFIG dts represents a logical
hierarchy of power domains of CPU. However, in reality, the power
domains may not have been physically built in such hierarchy.

Change-Id: Ibcbb5ca7b2c969f8ad03ab2eab289725245af7a9
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

The platform sip is reporting a "unsupported function ID" if the
smc function id is not pmc command. When actually the smc function id
could be specific to the tegra sip handler.
This patch removes the error reported.

Change-Id: Ia3c8545d345746c5eea6d75b9e6957ca23ae9ca3
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>

This patch enables on-chip timer1 interrupts for Tegra210 platforms.

Change-Id: Ic7417dc0e69264d7c28aa012fe2322cd30838f3e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>