Skip to content

GitLab

Switch branch/tag
  1. 23 May, 2018 1 commit
  3. 15 May, 2018 1 commit
    • Sandrine Bailleux's avatar
      SPM: Do not trap S-EL0 access to SVE/SIMD/FP regs · 39848945
      Sandrine Bailleux authored 
      

This allows secure partitions to access these registers. This is
needed in some cases. For example, it has been reported that in order
to implement secure storage services, a secure partition needs to
encrypt/decrypt some authentication variables, which requires FP/SIMD
support.

Note that SPM will not do any saving/restoring of these registers on
behalf of the SP. This falls under the SP's responsibility.

Also note that if the SP gets preempted, it might not get a chance to
save/restore FP/SIMD registers first. This patch does not address this
problem. It only serves as a temporary solution to unblock development
on the secure partition side.

Change-Id: I3b8ccdebdac0219f6ac96ad66ab2be0be8374ad3
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      39848945
  5. 27 Apr, 2018 2 commits
    • Masahiro Yamada's avatar
      types: use int-ll64 for both aarch32 and aarch64 · 0a2d5b43
      Masahiro Yamada authored 
      Since commit 031dbb12

 ("AArch32: Add essential Arch helpers"),
it is difficult to use consistent format strings for printf() family
between aarch32 and aarch64.

For example, uint64_t is defined as 'unsigned long long' for aarch32
and as 'unsigned long' for aarch64.  Likewise, uintptr_t is defined
as 'unsigned int' for aarch32, and as 'unsigned long' for aarch64.

A problem typically arises when you use printf() in common code.

One solution could be, to cast the arguments to a type long enough
for both architectures.  For example, if 'val' is uint64_t type,
like this:

  printf("val = %llx\n", (unsigned long long)val);

Or, somebody may suggest to use a macro provided by <inttypes.h>,
like this:

  printf("val = %" PRIx64 "\n", val);

But, both would make the code ugly.

The solution adopted in Linux kernel is to use the same typedefs for
all architectures.  The fixed integer types in the kernel-space have
been unified into int-ll64, like follows:

    typedef signed char           int8_t;
    typedef unsigned char         uint8_t;

    typedef signed short          int16_t;
    typedef unsigned short        uint16_t;

    typedef signed int            int32_t;
    typedef unsigned int          uint32_t;

    typedef signed long long      int64_t;
    typedef unsigned long long    uint64_t;

[ Linux commit: 0c79a8e29b5fcbcbfd611daf9d500cfad8370fcf ]

This gets along with the codebase shared between 32 bit and 64 bit,
with the data model called ILP32, LP64, respectively.

The width for primitive types is defined as follows:

                   ILP32           LP64
    int            32              32
    long           32              64
    long long      64              64
    pointer        32              64

'long long' is 64 bit for both, so it is used for defining uint64_t.
'long' has the same width as pointer, so for uintptr_t.

We still need an ifdef conditional for (s)size_t.

All 64 bit architectures use "unsigned long" size_t, and most 32 bit
architectures use "unsigned int" size_t.  H8/300, S/390 are known as
exceptions; they use "unsigned long" size_t despite their architecture
is 32 bit.

One idea for simplification might be to define size_t as 'unsigned long'
across architectures, then forbid the use of "%z" string format.
However, this would cause a distortion between size_t and sizeof()
operator.  We have unknowledge about the native type of sizeof(), so
we need a guess of it anyway.  I want the following formula to always
return 1:

  __builtin_types_compatible_p(size_t, typeof(sizeof(int)))

Fortunately, ARM is probably a majority case.  As far as I know, all
32 bit ARM compilers use "unsigned int" size_t.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      0a2d5b43
    • Masahiro Yamada's avatar
      Fix pointer type mismatch of handlers · 57d1e5fa
      Masahiro Yamada authored 
      Commit 4c0d0390

 ("Rework type usage in Trusted Firmware") changed
the type usage in struct declarations, but did not touch the definition
side.  Fix the type mismatch.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      57d1e5fa
  7. 21 Apr, 2018 1 commit
  9. 17 Apr, 2018 1 commit
  11. 13 Apr, 2018 2 commits
  13. 03 Apr, 2018 1 commit
  15. 27 Mar, 2018 1 commit
    • Joel Hutton's avatar
      Clean usage of void pointers to access symbols · 9f85f9e3
      Joel Hutton authored 
      

Void pointers have been used to access linker symbols, by declaring an
extern pointer, then taking the address of it. This limits symbols
values to aligned pointer values. To remove this restriction an
IMPORT_SYM macro has been introduced, which declares it as a char
pointer and casts it to the required type.

Change-Id: I89877fc3b13ed311817bb8ba79d4872b89bfd3b0
Signed-off-by: default avatarJoel Hutton <Joel.Hutton@Arm.com>
      9f85f9e3
  17. 26 Mar, 2018 1 commit
  19. 21 Mar, 2018 2 commits
    • Antonio Nino Diaz's avatar
      Rename 'smcc' to 'smccc' · 085e80ec
      Antonio Nino Diaz authored 
      

When the source code says 'SMCC' it is talking about the SMC Calling
Convention. The correct acronym is SMCCC. This affects a few definitions
and file names.

Some files have been renamed (smcc.h, smcc_helpers.h and smcc_macros.S)
but the old files have been kept for compatibility, they include the
new ones with an ERROR_DEPRECATED guard.

Change-Id: I78f94052a502436fdd97ca32c0fe86bd58173f2f
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      085e80ec
    • Sandrine Bailleux's avatar
      Trusty: Fix sanity check on NS entry point · 0d3feba9
      Sandrine Bailleux authored 
      

This patch fixes the sanity check on the non-secure entrypoint value
returned by bl31_plat_get_next_image_ep_info(). This issue has been
reported by Coverity Scan Online:

  CID 264893 (#1 of 1): Dereference null return value (NULL_RETURNS)
  Dereferencing a null pointer ns_ep_info.

Change-Id: Ia0f64d8c8b005f042608f1422ecbd42bc90b2fb4
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      0d3feba9
  21. 14 Mar, 2018 1 commit
    • Dimitris Papastamos's avatar
      Fixup `SMCCC_ARCH_FEATURES` semantics · a205a56e
      Dimitris Papastamos authored 
      

When querying `SMCCC_ARCH_WORKAROUND_1` through `SMCCC_ARCH_FEATURES`,
return either:
  * -1 to indicate the PE on which `SMCCC_ARCH_FEATURES` is called
    requires firmware mitigation for CVE-2017-5715 but the mitigation
    is not compiled in.
  * 0 to indicate that firmware mitigation is required, or
  * 1 to indicate that no firmware mitigation is required.

This patch complies with v1.2 of the firmware interfaces
specification (ARM DEN 0070A).

Change-Id: Ibc32d6620efdac6c340758ec502d95554a55f02a
Signed-off-by: default avatarDimitris Papastamos <dimitris.papastamos@arm.com>
      a205a56e
  23. 02 Mar, 2018 1 commit
  25. 01 Mar, 2018 3 commits
  27. 28 Feb, 2018 1 commit
  29. 27 Feb, 2018 2 commits
    • Jeenu Viswambharan's avatar
      TSPD: Register preempted SMC error code with EHF · 472be0f7
      Jeenu Viswambharan authored 
      

An earlier patch extended ehf_allow_ns_preemption() API to also register
an error code to offer to Non-secure when a Yielding SMC is preempted by
SDEI interrupt. In TSPD's case, register the error code TSP_PREEMPTED.

Change-Id: I31992b6651f80694e83bc5092b044ef7a3eda690
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      472be0f7
    • Jeenu Viswambharan's avatar
      SDEI: Pop dispatch context only after error checking · 8e3032f9
      Jeenu Viswambharan authored 
      

Currently, when the client attempts to do SDEI_EVENT_COMPLETE or
SDEI_EVENT_COMPLETE_AND_RESUME, the dispatcher pops off the outstanding
dispatch context for sanity check. There are however other checks
following this, which could potentially return failure. If that happens,
by popping the context, the dispatcher has inadvertently discarded a
valid context.

This patch fixes this bug by inspecting (not actually popping) the
outstanding context. The context is popped only after all error checks
are completed.

Change-Id: Ie199f6442f871a8177a8247a0c646543bad76d21
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      8e3032f9
  31. 22 Feb, 2018 1 commit
  33. 21 Feb, 2018 1 commit
  35. 14 Feb, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Remove URLs from comments · fb1198b1
      Antonio Nino Diaz authored 
      

This fixes all defects according to MISRA Rule 3.1: "The character
sequences /* and // shall not be used within a comment". This affects
all URLs in comments, so they have been removed:

- The link in `sdei_state.c` can also be found in the documentation file
  `docs/sdei.rst`.

- The bug that the file `io_fip.c` talks about doesn't affect the
  currently supported version of GCC, so it doesn't make sense to keep
  the comment. Note that the version of GCC officially supported is the
  one that comes with Linaro Release 17.10, which is GCC 6.2.

- The link in `tzc400.c` was broken, and it didn't correctly direct to
  the Technical Reference Manual it should. The link has been replaced
  by the title of the document, which is more convenient when looking
  for the document.

Change-Id: I89f60c25f635fd4c008a5d3a14028f814c147bbe
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      fb1198b1
  37. 06 Feb, 2018 2 commits
    • Jeenu Viswambharan's avatar
      TSPD: Require NS preemption along with EL3 exception handling · 6027796f
      Jeenu Viswambharan authored 
      

At present, the build option TSP_NS_INTR_ASYNC_PREEMPT controls how
Non-secure interrupt affects TSPs execution. When TSP is executing:

  1. When TSP_NS_INTR_ASYNC_PREEMPT=0, Non-secure interrupts are received
     at the TSP's exception vector, and TSP voluntarily preempts itself.

  2. When TSP_NS_INTR_ASYNC_PREEMPT=1, Non-secure interrupts causes a
     trap to EL3, which preempts TSP execution.

When EL3 exception handling is in place (i.e.,
EL3_EXCEPTION_HANDLING=1), FIQs are always trapped to EL3. On a system
with GICv3, pending NS interrupts while TSP is executing will be
signalled as FIQ (which traps to EL3). This situation necessitates the
same treatment applied to case (2) above.

Therefore, when EL3 exception handling is in place, additionally
require that TSP_NS_INTR_ASYNC_PREEMPT is set to one 1.

Strictly speaking, this is not required on a system with GICv2, but the
same model is uniformly followed regardless, for simplicity.

Relevant documentation updated.

Change-Id: I928a8ed081fb0ac96e8b1dfe9375c98384da1ccd
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      6027796f
    • Jeenu Viswambharan's avatar
      TSPD: Explicitly allow NS preemption for Yielding SMCs · 1dd022ca
      Jeenu Viswambharan authored 
      

When EL3 exception handling is in effect (i.e.,
EL3_EXCEPTION_HANDLING=1), Non-secure interrupts can't preempt Secure
execution. However, for yielding SMCs, preemption by Non-secure
interupts is intended.

This patch therefore adds a call to ehf_allow_ns_preemption() before
dispatching a Yielding SMC to TSP.

Change-Id: Ia3a1ae252f3adc0f14e6d7e0502f251bdb349bdf
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      1dd022ca
  39. 01 Feb, 2018 1 commit
  41. 29 Jan, 2018 1 commit
  43. 25 Jan, 2018 5 commits
  45. 10 Jan, 2018 1 commit
  47. 09 Jan, 2018 1 commit
  49. 08 Jan, 2018 2 commits
  51. 12 Dec, 2017 1 commit
    • Sandrine Bailleux's avatar
      SPM: Fix MM_COMMUNICATE_AARCH32/64 parameters · 4d2787ce
      Sandrine Bailleux authored 
      This partially reverts commit d6b532b5

, keeping only the fixes to
the assertions. The changes related to the order of arguments passed
to the secure partition were not correct and violated the
specification of the SP_EVENT_COMPLETE SMC.

This patch also improves the MM_COMMUNICATE argument validation.  The
cookie argument, as it comes from normal world, can't be trusted and thus
needs to always be validated at run time rather than using an assertion.

Also validate the communication buffer address and return
INVALID_PARAMETER if it is zero, as per the MM specification.

Fix a few typos in comments and use the "secure partition" terminology
rather than "secure payload".

Change-Id: Ice6b7b5494b729dd44611f9a93d362c55ab244f7
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      4d2787ce
  53. 06 Dec, 2017 2 commits