GitLab

The common makefile used by every a8k/cn913x platform
(a8k_common.mk) assumed default paths in PLAT_INCLUDES,
BLE/BL31_PORTING_SOURCES. Allow overriding those
variables, in order to avoid code duplication.

It can be helpful in case using multiple board variants
or sharing common settings between different platforms.

Change-Id: Idce603e44ed04d99fb1e3e11a2bb395d552e2bf7
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Do not set all include directories, including those for external targets
in one PLAT_INCLUDES variable.

Instead split them into variables:
* $(PLAT_INCLUDES) for all TF-A BL images
* BLE target specific $(PLAT_INCLUDES) only for Marvell BLE image
* $(MV_DDR_INCLUDES) for targets in external Marvell mv-ddr-marvell tree

Include directory $(CURDIR)/drivers/marvell is required by TF-A BL
images, so move it from ble.mk to a8k_common.mk.

Include directory $(MV_DDR_PATH) is needed only by Marvell BLE image, so
move it into BLE target specific $(PLAT_INCLUDES) variable.

And remaining include directories specified in ble.mk are needed only
for building external dependences from Marvell mv-ddr tree, so move them
into $(MV_DDR_INCLUDES) variable and correctly use it in $(MV_DDR_LIB)
target.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I331f7de675dca2bc70733d56b768f00d56ae4a67

Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and will not support PM, FC and other features implemented
in these FW images.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Idf301ebd218ce65a60f277f3876d0aeb6c72f105
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/37769

Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>

Since the dfx register set is going to be marked as secure expose dfx
secure read and write function via SiP services. In introduced misc_dfx
driver some registers are white-listed so non-secure software can still
access them.

This will allow non-secure word drivers access some white-listed
registers related to e.g.:  Sample at reset, efuses, SoC type and
revision ID accesses.

Change-Id: If9ae2da51ab2e6ca62b9a2c940819259bf25edc0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25055

Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Added smc calls support to access ddr phy registers.

Change-Id: Ibaa0a8e20b6398ab394c7e2e9ea61f9a28cdb870
Signed-off-by: Alex Leibovich <alexl@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/20791

Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Since the dfx register set is going to be marked as secure (in order to
protect efuse registers for non secure access), accessing thermal
registers which are part of dfx register set, will not be possible from
lower exception levels. Due to above expose thermal driver as a SiP
service.  This will allow Linux and U-Boot thermal driver to initialise
and perform various operations on thermal sensor.

The thermal sensor driver is based on Linux
drivers/thermal/armada_thermal.c.

Change-Id: I4763a3bf5c43750c724c86b1dcadad3cb729e93e
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/20581

Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Tested-by: Kostya Porotchkin <kostap@marvell.com>

Add initialization for TRNG-IP-76 driver and support SMC call
0xC200FF11 used for reading HW RNG value by secondary bootloader
software for KASLR support.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: I1d644f67457b28d347523f8a7bfc4eacc45cba68
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/32688

Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ibc15db07c581eca29c1b1fbfb145cee50dc42605

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: If545b3812787cc97b95dbd61ed51c37d30c5d412

Only non-file targets should be set a .PHONY. Otherwise if file target is
set as .PHONY then targets which depends on those file .PHONY targets would
be always rebuilt even when their prerequisites are not changed.

File target which needs to be always rebuilt can be specified in Make
system via having a prerequisite on some .PHONY target, instead of marking
whole target as .PHONY. In Makefile projects it is common to create empty
.PHONY target named FORCE for this purpose.

This patch changes all file targets which are set as .PHONY to depends on
new .PHONY target FORCE, to ensure that these file targets are always
rebuilt (as before). Basically they are those targets which calls external
make subprocess.

After FORCE target is specified in main Makefile, remove it from other
Makefile files to prevent duplicate definitions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iee3b4e0de93879b95eb29a1745a041538412e69e

FORCE target is used as a dependency for other file targets which needs to
be always rebuilt. .PHONY target is standard Makefile target which specify
non-file targets and therefore needs to be always rebuilt.

Targets clean, realclean and distclean are .PHONY targets used to remove
built files. Correctly set that mrvl_clean target is prerequisite for these
clean targets to ensure that built files are removed.

Finally this change with usage of FORCE target allows to remove mrvl_clean
hack from the prerequisites of a8k ${DOIMAGETOOL} target which was used
just to ensure that ${DOIMAGETOOL} is always rebuilt via make subprocess.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2fa8971244b43f101d846fc433ef7b0b6f139c92

This new target builds boot-image.bin binary as described in documentation.
This image does not contain WTMI image and therefore WTP repository is not
required for building.

Having ability to build just this boot-image.bin binary without full
flash-image.bin is useful for A3720 Turris MOX board which does not use
Marvell's WTP and a3700_utils.

To reduce duplicity between a8k and a3k code, define this new target and
also definitions for $(BUILD_PLAT)/$(BOOT_IMAGE) in common include file
marvell_common.mk.

For this purpose it is needed to include plat/marvell/marvell.mk file from
a3700_common.mk unconditionally (and not only when WTP is defined). Now
when common file plat/marvell/marvell.mk does not contain definition for
building $(DOIMAGETOOL), it is possible to move its inclusion at the top of
the a3700_common.mk file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic58303b37a1601be9a06ff83b7a279cb7cfc8280

Currently a3k target is misusing ${DOIMAGETOOL} target for building flash
and UART images. It is not used for building image tool.

So move ${DOIMAGETOOL} target from common marvell include file into a8k
include file and add correct invocation of ${MAKE} into a3k for building
flash and UART images.

Part of this change is also checks that MV_DDR_PATH for a3k was specified
by user as this option is required for building a3k flash and UART images.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5ae9d08b8505460933f17836c9b6435fd6e51bb6

Include file plat/marvell/marvell.mk for platform A3700 was included two
times. Once from file plat/marvell/armada/a3k/common/a3700_common.mk and
second time from common file plat/marvell/armada/common/marvell_common.mk.

It caused following warning every time was make called:

    plat/marvell/marvell.mk:51: warning: overriding recipe for target 'mrvl_clean'
    plat/marvell/marvell.mk:51: warning: ignoring old recipe for target 'mrvl_clean'

Change in this commit removes inclusion of plat/marvell/marvell.mk file in
common file plat/marvell/armada/common/marvell_common.mk. As a80x0 platform
needs this include file, add it also into a80x0 platform specific include
file lat/marvell/armada/a8k/common/a8k_common.mk.

Also moves inclusion of plat/marvell/marvell.mk file in a3700 platform file
plat/marvell/armada/a3k/common/a3700_common.mk at correct place. Global
plat/marvell/marvell.mk expects that variables DOIMAGEPATH and DOIMAGETOOL
are already defined, but it defines MARVELL_SECURE_BOOT variable which is
needed by plat/marvell/armada/a3k/common/a3700_common.mk.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5cbbd7eb8a3376924419f9850516b2a4924be5aa

Implement function which will allow to start AP FW.

Change-Id: Ie0fc8ad138bf56b10809cdc92d1e5e96a2aaf33f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Use the BOARD_DIR variable instead of PLAT_FAMILY_BASE variable for
determening the path of the system_power.c file.

The variable was not updated, when it was deprecated in a8k_common.mk
in commit 613bbde0

.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: I9b4659a19ba3cd5c869d44c5d834b220f49136e8

The phy porting layer uses defaults defined in
"phy-default-porting-layer.h" when board specific file
"phy-porting-layer.h" is not found. Because of the regression the board
specific directory was not included, therefore all boards used default
parameters.

Change-Id: I66e5e6eb8a39cca5aeeb4de6dab2ceddc39c1e31
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

As a preparation for upcoming support for CN9130 platform, which is
classified as OcteonTx2 product but inherits functionality from a8k,
allow to use a8k_common.mk and mss_common.mk from outside of
PLAT_FAMILY_BASE.
Above is done by introducing BOARD_DIR which needs to be set by each
platform, before including a8k_common.mk and mss_common.mk. This will
allow to use mentioned mk files not only for platforms located under
previously defined PLAT_FAMILY_BASE.

Change-Id: I22356c99bc0419a40ae11e42f37acd50943ea134
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

This commit is a preparation for upcoming support for OcteonTX and
OcteonTX2 product families. Armada platform related files (docs,
plat, include/plat) are moved to the new "armada" sub-folder.

Change-Id: Icf03356187078ad6a2e56c9870992be3ca4c9655
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

BL31_CACHE_DISABLE flag was introduced as a work-around
for the older SoC revisions. Since it is not relevant in the
newest versions, toggle it to be disabled by default.
One can still specify it by adding 'BL31_CACHE_DISABLE=1'
string to the build command.

Change-Id: I11b52dade3ff7f8ee643b8078c6e447c45946570
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Implements a way to add platform specific power off code to a
Marvell Armada 8K platform.

Marvell Armada 8K boards can now add a board/system_power.c file
that contains a system_power_off() function.
This function can now send a command to a power management MCU or
other board periferals before shutting the board down.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: Iaba20bc2f603195679c54ad12c0c18962dd8e3db
---
I am working on a device that will be ported later, which has a
custom power management MCU that handles LEDs, board power and fans
and requires this separation.

Also, update platform_def.h guidelines about includes in the porting
guide.

Change-Id: I1ae338c9dd3242b309f6d53687ba2cb755d488c3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch makes the build system link the console framework code by
default, like it already does with other common libraries (e.g. cache
helpers). This should not make a difference in practice since TF is
linked with --gc-sections, so the linker will garbage collect all
functions and data that are not referenced by any other code. Thus, if a
platform doesn't want to include console code for size reasons and
doesn't make any references to console functions, the code will not be
included in the final binary.

To avoid compatibility issues with older platform ports, only make this
change for the MULTI_CONSOLE_API.

Change-Id: I153a9dbe680d57aadb860d1c829759ba701130d3
Signed-off-by: Julius Werner <jwerner@chromium.org>

Add support for SVC test builds for tuning AVS values.
Update the SVC procedure and add EEPROM access.
Add support for AP807 AVS values (10 bits wide).
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

- Update CPU frequency on AP807 to 2GHz for SAR 0x0.
- Increase AVS to 0.88V for 2GHz clock

Change-Id: Ic945b682ab2f8543e34294bfc56c3eae2c5e0c8e
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Migrate Marvell platforms from legacy console API to
multi-console API.

Change-Id: I647f5f49148b463a257a747af05b5f0c967f267c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Move doimage utility from toos/doimage to tools/marvell/doimage.
This is done for supporting mode Marvell tools in the future.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Some of COMPHY parameters depends on the hw connection between the SoC
and the PHY, which can vary on different boards e.g. due to different
wires length. Define the "porting layer" with some defaults
parameters. It ease updating static values which needs to be updated due
to board differences, which are now grouped in one place.

Example porting layer for a8k-db is under:
plat/marvell/a8k/a80x0/board/phy-porting-layer.h

If for some boards parameters are not defined (missing
phy-porting-layer.h), the default values are used
(drivers/marvell/comphy/phy-default-porting-layer.h)
and the following compilation warning is show:
"Using default comphy params - you may need to suit them to your board".

The common COMPHY driver code is extracted in order to be shared with
future COMPHY driver for A3700 SoC platforms
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

The BLE is the pre-TF-A boot stage required by Marvell Armada
BootROM for bringing up DRAM and allow the boot image copy to it.
Since this is not a standard boot level and only uses the TF-A
as a build environment, it was introduced out of source tree.
However it turns out that such remote location introduces additional
complexity to the upstream TF-A build process.
In order to simplify the build environment the BLE source folder
is relocated from the external repository to A8K platform directory.
The build documentation is updated accordingly.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

- Migrate to bl2_early_platform_setup2().
- Remove references to removed build options.
- Use private definition of bl31_params_t.

This is an incomplete migration, the platform doesn't currently compile.

Change-Id: I1ae477b1f2489f49b651528050fdf06e4a55e425
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

At the moment we have two I2C stub drivers (for the Allwinner and the
Marvell platform), which #include the actual .c driver file.
Change this into the more usual design, by renaming and moving the stub
drivers into platform specific header files and including these from the
actual driver file. The platform specific include directories make sure
the driver picks up the right header automatically.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Define the RT service space as secure with use of memory controller
trustzone feature. Thanks to this protection, any NS-Bootloader nor NS-OS,
won't be able to access RT services (e.g. accidentally overwrite it,
which will at best result in RT services unavailability).

Change-Id: Ie5b6cbe9a1b77879d6d8f8eac5d4e41e468496ce
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Add common Marvell ARMADA platform components.
This patch also includes common components for Marvell
ARMADA 8K platforms.

Change-Id: I42192fdc6525a42e46b3ac2ad63c83db9bcbfeaf
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>