GitLab

Correct SDMMC macros to define unsigned values as expected by the
driver implementation.

Change-Id: Ib009f3df2cf26a9759d129eb571a27b2564770ce
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Remove inclusion of libfdt source files in source file list since these
are already included from generic libfdt.mk makefile.

Change-Id: If42624557c4d88ca85d70f83b1b08c58f50afe72
Signed-off-by: Yann Gautier <yann.gautier@st.com>

U-Boot should be compiled with stm32mp15_trusted_defconfig which is
supported since tag v2019.07-rc1 with commit [1].

The creation of the U-Boot binary with stm32 header is done at U-Boot
compilation step, it is no more required to call the extra command.

[1] https://git.denx.de/?p=u-boot.git;a=commit;h=015289580f81



Change-Id: Ia875c22184785fc2e02ad07993a649069cd5ce34
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.

The SYSCFG driver is in charge of configuring masters on the interconnect,
IO compensation, low voltage boards, or pull-ups for boot pins.
All other configurations should be handled in Linux drivers requiring it.

Device tree files are also updated to manage vdd-supply regulator.

Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

GPIOx clocks are specific to each STM32MP platforms.
This change moves function stm32_get_gpio_bank_clock() from stm32mp
common source files to platform private stm32mp1_private.c source file.

Change-Id: I9616c0d3fe4d10af715d6f2d1550c13ab62c829a
Signed-off-by: Yann Gautier <yann.gautier@st.com>

To activate the CSG option, the driver needs to set the bit2
of PLLNCR register = SSCG_CTRL: Spread Spectrum Clock Generator.
This bit should not be cleared when starting the PLL.

Change-Id: Ie5c720ff03655f27a7e7e9e7ccf8295dd046112f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Rework the macro that eases the table definition: the src and msk fields
are now using MASK and SHIFT defines of each source register.
Some macros had then to be modified: _USART1_SEL, _ASS_SEL and _MSS_SEL to
_UART1_SEL, _AXIS_SEL, and _MCUS_SEL to match register fields.

Note: the mask for RCC_ASSCKSELR_AXISSRC is changed from 0x3 to 0x7
to reflect the size of the register field, even if there are only
3 possible clock sources.

The mask value is also corrected for QSPI and FMC clock selection.

Change-Id: I44114e3c1dd37b9fa1be1ba519611abd9a07764c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.

The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.

Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Those defines are used in STM32MP1 clock driver.
It is better to put them altogether with already defined registers.

Change-Id: I6f8ad8c2477b947af6f76283a4ef5c40212d0027
Signed-off-by: Yann Gautier <yann.gautier@st.com>

BL2U should not build when RESET_TO_SP_MIN flag is set, like BL1 and
BL2.

Change-Id: Iac516121f98611ca1f58d2b5efdec6525b06ce4e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Also sort alphabetically the links at the bottom, a couple of them were
not sorted.

Change-Id: I49a1dbe9e56a36c5fdbace8e4c8b9a5270bc2984
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

* changes:
  ti: k3: common: Remove coherency workaround for AM65x
  ti: k3: common: Use coherent memory for shared data

Provide the friendly marketing names, not just the platform name.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id4427abb73d0c1be4ac1709b2a8e87beffc20dd5

When acquiring or releasing the power domain locks for a given CPU the
parent nodes are looked up by walking the up the PD tree list on both the
acquire and release path, only one set of lookups is needed. Fetch the
parent nodes first and pass this list into both the acquire and release
functions to avoid the double lookup.

This also allows us to not have to do this lookup after coherency has
been exited during the core power down sequence. The shared struct
psci_cpu_pd_nodes is not placed in coherent memory like is done
for psci_non_cpu_pd_nodes and doing so would negatively affect
performance. With this patch we remove the need to have it in coherent
memory by moving the access out of psci_release_pwr_domain_locks().
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: I7b9cfa9d31148dea0f5e21091c8b45ef7fe4c4ab

Neoverse N1 erratum 1315703 is a Cat A (rare) erratum [1], present in
older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined CPUACTLR2_EL1
system register, which will disable the load-bypass-store feature.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdocpjdoc-466751330-1032/index.html



Change-Id: I5c708dbe0efa4daa0bcb6bd9622c5efe19c03af9
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

We previously left our caches on during power-down to prevent any
non-caching accesses to memory that is cached by other cores. Now with
the last accessed areas all being marked as non-cached by
USE_COHERENT_MEM we can rely on that to workaround our interconnect
issues. Remove the old workaround.

Change-Id: Idadb7696d1449499d1edff4f6f62ab3b99d1efb7
Signed-off-by: Andrew F. Davis <afd@ti.com>

HW_ASSISTED_COHERENCY implies something stronger than just hardware
coherent interconnect, specifically a DynamIQ capable ARM core.

For K3, lets use WARMBOOT_ENABLE_DCACHE_EARLY to enable caches early
and then let the caches get shut off on powerdown, to prevent data
corruption we also need to USE_COHERENT_MEM so that any accesses to
shared memory after this point is only to memory that is set as
non-cached for all cores.

Change-Id: Ib9337f012df0e0388237942607c501b6f3e2a949
Signed-off-by: Andrew F. Davis <afd@ti.com>

add mcsi driver to support cache coherence.

Change-Id: I94f5922783e5dbc6b7e92aa06464bc1f0177f00a
Signed-off-by: kenny liang <kenny.liang@mediatek.com>

Add Mediatek GIC driver to support interrupt functions.
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I967a18f2e45b7bbc88c506dd4f1f40a745227ad9

Change-Id: I0d9dbef7041fcf950bcafcdbbc17c72b4dea9e40
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

During the secondary cores' cold boot path, the cores initialise the GIC
CPU interface. However this is a redundant action since 1) the cores are
powered down immediately after that, 2) the GIC CPU interface is
initialised from scratch when the secondary cores are powered up again
later.

Moreover, this part of code was introducing a bug. In a GICv3 system,
the GIC's CPU interface system registers must not be written without the
core being marked as "awake" in the redistributor. However, this
sequence was performing such accesses and this would cause those cores
to hang. The hang was caused by the DSB instruction that would never
complete because of the GIC not recognising those writes.

For the two aforementioned reasons, the entire part of the GIC CPU
interface initialisation is removed.

Change-Id: I6c33a1edda69dd5b6add16a27390a70731b5532a
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

According to Arm GIC spec(IHI0069E, section 4.6.1),
when GICD_CTLR.DS == 0, Secure Group 1 interrupts
are treated as Group 0 by a CPU interface if:
- The PE does not implement EL3.
- ICC_SRE_EL1(S).SRE == 0

When a cpu enter suspend or deep idle, it might be
powered off. When the cpu resume, according to
the GIC spec(IHI0069E, section 9.2.15, 9.2.16 and
9.2.22) the ICC_SRE_EL1.SRE reset value is 0 (if
write is allowed) and G0/G1S/G1NS interrupt of the
GIC cpu interface are all disabled.

If a G1S SPI interrupt occurred and the target cpu
of the SPI is assigned to a specific cpu which is
in suspend and is powered off, when the cpu resume
and start to initial the GIC cpu interface, the
initial sequence might affect the interrupt group
type of the pending interrupt on the cpu interface.

Current initial sequence on the cpu interface is:
1. Enable G0 interrupt
2. Enable G1S interrupt
3. Enable ICC_SRE_EL1(S).SRE

It is possible to treat the pending G1S interrupt
as G0 interrupt on the cpu interface if the G1S
SPI interrupt occurred between step2 and step3.

To prevent the above situation happend, the initial
sequence should be changed as follows:
1. Enable ICC_SRE_EL1(S).SRE
2. Enable G0 interrupt
3. Enable G1S interrupt

Change-Id: Ie34f6e0b32eb9a1677ff72571fd4bfdb5cae25b0
Signed-off-by: James Kung <kong1191@gmail.com>

Some cores support only AArch64 mode. In those cores, only a limited
subset of the AArch32 system registers are implemented. Hence, if TF-A
is supposed to run on AArch64-only cores, it must be compiled with
CTX_INCLUDE_AARCH32_REGS=0.

Currently, the default settings for compiling TF-A are with the AArch32
system registers included. So, if we compile TF-A the default way and
attempt to run it on an AArch64-only core, we only get a runtime panic.

Now a compile-time check has been added to ensure that this flag has the
appropriate value when AArch64-only cores are included in the build.

Change-Id: I298ec550037fafc9347baafb056926d149197d4c
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Change-Id: I41ce5323c33a81db13c5cc40de1ac4e221a10cd8
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

* changes:
  Removing IRC related info from the documentation
  Further fixes to documentation links

Change-Id: I5cf8c70a304bf5869cbeb12fa8d39171cff48ebd
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Automatic labelling of document titles is a prerequisite for
converting the format of cross-document links. Sphinx will
generate (via the enabled extension) a hidden link target for
each document title and this can be referred to later, from
another page, to link to the target.

The plugin options being used require Sphinx >= 2.0.0 so a
requirements.txt file has been added. This file is used with
the pip package manager for Python so that the correct
dependencies are installed.

Change-Id: Ic2049db5804aa4a6447608ba4299de958ce0a87d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>