GitLab

Uncore perfmon appears to the CPU as a set of uncore perfmon registers
which can be read and written using the ARI interface. The MCE code
sequence handles reads and writes to these registers by manipulating
the underlying T186 uncore hardware.

To access an uncore perfmon register, CPU software writes the ARI
request registers to specify

* whether the operation is a read or a write,
* which uncore perfmon register to access,
* the uncore perfmon unit, group, and counter number (if necessary),
* the data to write (if the operation is a write).

It then initiates an ARI request to run the uncore perfmon sequence in
the MCE and reads the resulting value of the uncore perfmon register
and any status information from the ARI response registers.

The NS world's MCE driver issues MCE_CMD_UNCORE_PERFMON_REQ command
for the EL3 layer to start the entire sequence. Once the request
completes, the NS world would receive the command status in the X0
register and the command data in the X1 register.

Change-Id: I20bf2eca2385f7c8baa81e9445617ae711ecceea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a helper function to the MCE driver to allow its
clients to issue UPDATE_CSTATE_INFO requests, without having to
setup the CPU context struct.

We introduced a struct to encapsulate the request parameters, that
clients can pass on to the MCE driver. The MCE driver gets the
parameters from the struct and programs the hardware accordingly.

Change-Id: I02bce57506c4ccd90da82127805d6b564375cbf1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Tegra simulation environment has limited capabilities. This patch
checks the chip's major and minor versions to decide the features to
enable/disable - MCE firmware version checking is disabled and limited
Memory Controller settings are enabled

Change-Id: I258a807cc3b83cdff14a9975b4ab4f9d1a9d7dcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch checks that the system is running with the supported MCE
firmware during boot. In case the firmware version does not match the
interface header version, then the system halts.

Change-Id: Ib82013fd1c1668efd6f0e4f36cd3662d339ac076
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new interface to allow for making an ARI call that
will enable LATIC for the chip verification software harness.

LATIC allows some MINI ISMs to be read in the CCPLEX. The ISMs are
used for various measurements relevant ot particular locations in
Silicon. They are small counters which can be polled to determine
how fast a particular location in the Silicon is.

Original change by Guy Sotomayor <gsotomayor@nvidia.com>

Change-Id: Ifb49b8863a009d4cdd5d1ba38a23b5374500a4b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.

Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for the C6 and C7 CPU_SUSPEND states. C6 is
an idle state while C7 is a powerdown state.

The MCE block takes care of the entry/exit to/from these core power
states and hence we call the corresponding MCE handler to process
these requests. The NS driver passes the tentative time that the
core is expected to stay in this state as part of the power_state
parameter, which we store in a per-cpu array and pass it to the
MCE block.

Change-Id: I152acb11ab93d91fb866da2129b1795843dfa39b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The CPU Complex (CCPLEX) Power Manager (Denver MCE, or DMCE) is an
offload engine for BPMP to do voltage related sequencing and for
hardware requests to be handled in a better latency than BPMP-firmware.

There are two interfaces to the MCEs - Abstract Request Interface (ARI)
and the traditional NVGINDEX/NVGDATA interface.

MCE supports various commands which can be used by CPUs - ARM as well
as Denver, for power management and reset functionality. Since the
linux kernel is the master for all these scenarios, each MCE command
can be issued by a corresponding SMC. These SMCs have been moved to
SiP SMC space as they are specific to the Tegra186 SoC.

Change-Id: I67bee83d2289a8ab63bc5556e5744e5043803e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>