GitLab

CN-9130 has single CP0 inside the package and 2 additional one from MoChi
interface. In case of db-9130-modular board the MCI interface is routed to:
- on-board CP115 (MCI0)
- extension board CP115 (MCI1)

The board is based on DIMM DDR.

The 9130 has up to 3CP, and decoding windows looks like below:

  (free for further use)
 .----------. 0xf800 0000
 | CP2 CFG  |
 '----------' 0xf600 0000
 | CP1 CFG  |
 '----------' 0xf400 0000
 | CP0 CFG  |
 '----------' 0xf200 0000
 | AP CFG   |
 '----------' 0xf000 0000
  (free for further use)
 .----------. 0xec00 0000
 | SPI      |
 | MEM_MAP  | (Currently not opened)
 '----------' 0xe800 0000
 | PEX2_CP2 |
 '----------' 0xe700 0000
 | PEX1_CP2 |
 '----------' 0xe600 0000
 | PEX0-CP2 |
 '----------'
 .----------. 0xe500 0000
 | PEX2_CP1 |
 '----------' 0xe400 0000
 | PEX1_CP1 |
 '----------' 0xe300 0000
 | PEX0-CP1 |
 '----------'
 .----------. 0xe200 0000
 | PEX2-CP0 |
 '----------' 0xe100 0000
 | PEX1-CP0 |
 '----------' 0xe000 0000
 | PEX0-CP0 |
 | 512MB    |
 '----------' 0xc000 0000

Change-Id: Ia8eee4f96c1043753f74f9da437b9f72ce2d6eb0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

As a preparation for upcoming support for CN9130 platform, which is
classified as OcteonTx2 product but inherits functionality from a8k,
allow to use a8k_common.mk and mss_common.mk from outside of
PLAT_FAMILY_BASE.
Above is done by introducing BOARD_DIR which needs to be set by each
platform, before including a8k_common.mk and mss_common.mk. This will
allow to use mentioned mk files not only for platforms located under
previously defined PLAT_FAMILY_BASE.

Change-Id: I22356c99bc0419a40ae11e42f37acd50943ea134
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

This commit is a preparation for upcoming support for OcteonTX and
OcteonTX2 product families. Armada platform related files (docs,
plat, include/plat) are moved to the new "armada" sub-folder.

Change-Id: Icf03356187078ad6a2e56c9870992be3ca4c9655
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Some of COMPHY parameters depends on the hw connection between the SoC
and the PHY, which can vary on different boards e.g. due to different
wires length. Define the "porting layer" with some defaults
parameters. It ease updating static values which needs to be updated due
to board differences, which are now grouped in one place.

Example porting layer for a8k-db is under:
plat/marvell/a8k/a80x0/board/phy-porting-layer.h

If for some boards parameters are not defined (missing
phy-porting-layer.h), the default values are used
(drivers/marvell/comphy/phy-default-porting-layer.h)
and the following compilation warning is show:
"Using default comphy params - you may need to suit them to your board".

The common COMPHY driver code is extracted in order to be shared with
future COMPHY driver for A3700 SoC platforms
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Add support for A8K platform boards

Change-Id: Ife025d930d2ab6cabbc13bbe19b2273cc1c938c8
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>