GitLab

This commit change the plat/qemu directory structure into:

`-- plat
    `-- qemu
        |-- common    (files shared with all qemu subplatforms)
        |-- qemu      (original qemu platform)
        |-- qemu_sbsa (new sqemu_sbsa platform)
        |-- subplat1
        `-- subplat2

This opens the possibility of adding new qemu sub-platforms which reuse
existing common platform code. The first platform which will leverage new
structure will be SBSA platform.
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: Id0d8133e1fffc1b574b69aa2770ebc02bb837a9b

This file moves gicv2 codes to a new separate files, target is to add
gicv3 support later.
Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Tested-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I30eb1fda5ea5c2b35d79360c52f46601cbca1bcc

Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.

As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.

Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The "Secure" prefix (S-ELx) is valid only for S-EL0 and S-EL1 but is
meaningless for EL3, since EL3 is always secure. Hence, the "S" prefix
has been removed from wherever it was used as "S-EL3".

Change-Id: Icdeac9506d763f9f83d7297c7113aec7b85e9dbe
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Replaces deprecated early platform setup APIs

* Replaces bl31_early_platform_setup() with bl31_early_platform_setup2()
* Replaces bl2_early_platform_setup() with bl2_early_platform_setup2()
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

The QEMU platform has only been used with LOAD_IMAGE_V2=1 for some time
now and bit rot has occurred for LOAD_IMAGE_V2=0. To ease the
maintenance make LOAD_IMAGE_V2=1 mandatory and remove the platform
specific code for LOAD_IMAGE_V2=0.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Add support for the new MULTI_CONSOLE_API

Crash information is now displayed in both the runtime and crash consoles,
if a crash occurs after the runtime console has been enabled

Enable MULTI_CONSOLE_API by default on qemu builds

Fixes ARM-software/tf-issues#561
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>

Update qemu_configure_mmu_##_el to add an additional region for code,
marked as MT_CODE | MT_SECURE. Update ro region attributes to NON_EXEC.

Update calls to QEMU_CONFIGURE_BLx_MMU() to pass an additional region for
code. Update calls to pass regions defined in common_def.h.

Increase MAX_MMAP_REGIONS to 10.

Enable SEPARATE_CODE_AND_RODATA by default on QEMU builds.

Fixes ARM-software/tf-issues#558
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>

Registered interrupts are configured in edge detection as the default
previous configuration assumed in previous code.

Not target mask required as Qemu BL31 will not send/route SGIs.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

The generic LOAD_IMAGE_V2 framework has been merged and enable for almost
all the arm platform. Because qemu platform doesn't share those common
files with arm, QEMU haven't got this support yet.

This patch add all the necessary code the files for adding LOAD_IMAGE_V2
support on QEMU and enable it as default.

Fixes ARM-software/tf-issues#507
Signed-off-by: Fu Wei <fu.wei@linaro.org>

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/



Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

We have lots of duplicated defines (and comment blocks too).
Move them to include/plat/common/common_def.h.

While we are here, suffix the end address with _END instead of
_LIMIT.  The _END is a better fit to indicate the linker-derived
real end address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds support for the QEMU virt ARMv8-A target.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>