1. 08 Oct, 2019 1 commit
    • Paul Beesley's avatar
      doc: Convert internal links to RST format · 34760951
      Paul Beesley authored
      
      
      Currently links between documents are using the format:
      
      <path/to/><filename>.rst
      
      This was required for services like GitHub because they render each
      document in isolation - linking to another document is like linking
      to any other file, just provide the full path.
      
      However, with the new approach, the .rst files are only the raw
      source for the documents. Once the documents have been rendered
      the output is now in another format (HTML in our case) and so,
      when linking to another document, the link must point to the
      rendered version and not the .rst file.
      
      The RST spec provides a few methods for linking between content.
      The parent of this patch enabled the automatic creation of anchors
      for document titles - we will use these anchors as the targets for
      our links. Additional anchors can be added by hand if needed, on
      section and sub-section titles, for example.
      
      An example of this new format, for a document with the title
      "Firmware Design" is :ref:`Firmware Design`.
      
      One big advantage of this is that anchors are not dependent on
      paths. We can then move documents around, even between directories,
      without breaking any links between documents. Links will need to be
      updated only if the title of a document changes.
      
      Change-Id: I9e2340a61dd424cbd8fd1ecc2dc166f460d81703
      Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      34760951
  2. 30 May, 2019 1 commit
  3. 22 May, 2019 5 commits
    • Paul Beesley's avatar
      doc: Use proper note and warning annotations · e1c5026a
      Paul Beesley authored
      
      
      The documentation contains plenty of notes and warnings. Enable
      special rendering of these blocks by converting the note prefix
      into a .. note:: annotation.
      
      Change-Id: I34e26ca6bf313d335672ab6c2645741900338822
      Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      e1c5026a
    • Paul Beesley's avatar
      doc: Reorganise images and update links · a2c320a8
      Paul Beesley authored
      
      
      Change-Id: I679d1499376a524bef1cfc33df995b0a719b5ac8
      Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      a2c320a8
    • Paul Beesley's avatar
      doc: Add minimal glossary · 8f62ca7b
      Paul Beesley authored
      
      
      One of the current issues with the documentation is that terms and
      abbreviations are frequently redefined. For example, we might have
      a sentence like "... the SCP (System Control Processor) will ...".
      
      These definitions might be repeated several times across pages, or
      even within the same document. Equally, some of these abbreviations
      are missed and are never expanded.
      
      Sphinx provides a :term: keyword that takes some text and,
      if that text is defined in a glossary document, links to its glossary
      entry. Using this functionality will prevent repeated definitions
      and will make the docs more maintainable by using a single
      definition source.
      
      The glossary added in this patch was created from a quick scrub of
      the source code - there may be missing entries. The SDEI abbreviation
      was used as an example.
      
      Note that a global_substitutions file was created. This file contains
      the RST 'replace' statements that convert plain text terms into linked
      terms (by adding the ':term:' keyword to them). An example is:
      
      .. |TF-A| replace:: :term:`TF-A`
      
      The 'rst_prolog' variable in conf.py is used to inject this list of
      replacements into each page. Terms must be surrounded with the pipe
      character to be turned into links - this means that we can still
      prevent certain terms from being linked if we don't want them to be.
      
      Change-Id: I87010ed9cfa4a60011a9b4a431b98cb4bb7baa28
      Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      8f62ca7b
    • Paul Beesley's avatar
      doc: Remove per-page contents lists · 57354abb
      Paul Beesley authored
      
      
      These are no longer needed as there will always be a table of contents
      rendered to the left of every page.
      
      Some of these lists can be quite long and, when opening a page, the
      reader sees nothing but a huge list of contents! After this patch,
      the document contents are front-and-centre and the contents are
      nicely rendered in the sidebar without duplication.
      
      Change-Id: I444754d548ec91d00f2b04e861de8dde8856aa62
      Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      57354abb
    • Paul Beesley's avatar
      doc: Reword document titles · 8aa05055
      Paul Beesley authored
      
      
      This patch attempts to standardise the document titles as well as
      adding titles to documents that were missing one. The aim is to
      remove needless references to "TF-A" or "Trusted Firmware" in the
      title of every document and to make sure that the title matches
      with the document content.
      
      Change-Id: I9b93ccf43b5d57e8dc793a5311b8ed7c4dd245cc
      Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      8aa05055
  4. 21 May, 2019 1 commit
    • Paul Beesley's avatar
      doc: Move documents into subdirectories · 40d553cf
      Paul Beesley authored
      
      
      This change creates the following directories under docs/
      in order to provide a grouping for the content:
      
      - components
      - design
      - getting_started
      - perf
      - process
      
      In each of these directories an index.rst file is created
      and this serves as an index / landing page for each of the
      groups when the pages are compiled. Proper layout of the
      top-level table of contents relies on this directory/index
      structure.
      
      Without this patch it is possible to build the documents
      correctly with Sphinx but the output looks messy because
      there is no overall hierarchy.
      
      Change-Id: I3c9f4443ec98571a56a6edf775f2c8d74d7f429f
      Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      40d553cf
  5. 28 Feb, 2019 1 commit
  6. 04 Jan, 2019 1 commit
    • Antonio Nino Diaz's avatar
      Sanitise includes across codebase · 09d40e0e
      Antonio Nino Diaz authored
      Enforce full include path for includes. Deprecate old paths.
      
      The following folders inside include/lib have been left unchanged:
      
      - include/lib/cpus/${ARCH}
      - include/lib/el3_runtime/${ARCH}
      
      The reason for this change is that having a global namespace for
      includes isn't a good idea. It defeats one of the advantages of having
      folders and it introduces problems that are sometimes subtle (because
      you may not know the header you are actually including if there are two
      of them).
      
      For example, this patch had to be created because two headers were
      called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
      to avoid collision."). More recently, this patch has had similar
      problems: 46f9b2c3 ("drivers: add tzc380 support").
      
      This problem was introduced in commit 4ecca339
      
       ("Move include and
      source files to logical locations"). At that time, there weren't too
      many headers so it wasn't a real issue. However, time has shown that
      this creates problems.
      
      Platforms that want to preserve the way they include headers may add the
      removed paths to PLAT_INCLUDES, but this is discouraged.
      
      Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
      Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      09d40e0e
  7. 26 Nov, 2018 1 commit