GitLab

Previous config blocks ATF runtime service communications with SDM mailbox
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ia857facd0bd0790056df94ed1e016bcf619a161e

Previous config blocks ATF runtime service communications with SDM mailbox
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ic97aa381d3ceb96395595ec192132859d626b8d1

"result of '1 << 31' requires 33 bits to represent, but 'int' only has
32 bits [-Werror=shift-overflow=]"

This is treated as an error since commit 93c690eb

 ("Enable
-Wshift-overflow=2 to check for undefined shift behavior")

Change-Id: I141827a6711ab7759bfd6357e4ed9c1176da7c7b
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib2ad2068abdf0b204c5cb021ea919581adaca4ef

This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.

Change-Id: I4c7a315cb18b3bbe623e7a7a998d2dac869638a7
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

MMC sample select needs to be set properly so that DWMMC clock can be
driven to 50Mhz
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I4a1dde4f6a1e78a36940c57a7a5b162be0bd443a

The new API becomes the default one.

Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I0544315986ee28b23157fdfec3fe5aebae6b860f

Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I0ffccca7ea83bff35c9f149d7054cd610a59ec01

Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I5241ed97697b0280b590b47b9173d102d23f305a

Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib79e2c6fe6e66dec5004701133ad6a5f4c78f2fa

Watchdog driver support & enablement during platform setup
Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>

Manages QSPI initialization, configuration and IO handling as boot device
Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>

To support the enablement of QSPI booting
Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>

MMC stack needs OCR voltage information for the platform to initialize
MMC controller correctly.
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

MMC stack needs OCR voltage information for the platform to initialize
MMC controller correctly.
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

Change map region for device 2 from non-secure to secure
Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>

We should be using zeromem to scrub memory instead of memset. This would
improve the performance by 200x
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

This adds BL31 support to Intel Stratix10 SoCFPGA platform. BL31 in TF-A
supports:
- PSCI calls to enable 4 CPU cores
- PSCI mailbox calls for FPGA reconfiguration
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>

A DDR calibration value is missing write mask, causing ECC DDR calibration
to fail. This patch addresses the issue. ECC should also be scrubbed before
MMU initializes, thus the scrubbing is moved to ddr intialization phase.
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>

This adds BL2 support for Intel Stratix 10 SoC FPGA.
Functionality includes:
- Release and setup peripherals from reset
- Calibrate DDR
- ECC DDR Scrubbing
- Load FIP (bl31 and bl33)
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>